Products

Perfect integration of Axis network devices into application scenarios.

Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.

Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.

Third-party applications on the camera can also communicate with KNX.

In addition to network cameras, all Axis network devices with ACAP are also supported.

Perfect integration of Axis network devices into application scenarios.

Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.

Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.

Third-party applications on the camera can also communicate with KNX.

In addition to network cameras, all Axis network devices with ACAP are also supported

Perfect integration of Axis network devices into application scenarios.

Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.

Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.

Third-party applications on the camera can also communicate with KNX.

In addition to network cameras, all Axis network devices with ACAP are also supported

Information

Via the SMART CONNECT KNX e-charge II, up to five compatible charging points can be integrated into

the KNX system.

You can find a list of compatible models on our product page.

Features:

• Integration of five charging points per device (completely configurable in ETS)

• Prioritisation of one charging point

• Dynamic load management (DLM)

• Static load management (SLM)

• Mixed operation with various manufacturers

• Support for external electricity meters (ISKRA, PHOENIX CONTACT, generic) at charging points which are not equipped with an integrated electricity meter.

• Grid-supporting control

• Integrated RS485 adapter

• Charging status values: Charging point status (status), Connected (status), Charging (status), Charging complete (status), Interrupt (set/status), Start/Stop (set/status), Unlock (set)

• Charging current status values: Target (status/set), Actual L1 - L3, Actual (status)

• Power status values: Actual L1 - L3, Actual (status)

• Energy status values: Actual L1 - L3, Actual (status)

• Energy consumption status values: Last charge (status), Total (status)

• Fault status values: Fault, Last fault

• Status values: Communication ID (EVCCID) (status), Charging point internal temperature (status), Temperature warning, RFID tag (status), Serial number, Charging point firmware version

• KNX Secure

• Expandable via firmware updates

Information

Operate the Philips Hue lighting system via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.

Features:

• Separate control of up to 25 Philips Hue lights

• Support of up to five Philips Hue Bridges per device

• Switching and dimming

• Individual control of RGB colour values

• Individual control of the colour temperature

• Configuration of switch-on brightness per lamp via ETS or device website

• Configuration of dimming behaviour per lamp via ETS or device website

• Calling up Philips Hue scenes

• Signal flashing of Philips Hue scenes (specific duration, return to original state)

• Alert flash per lamp

• Colour gradient function per lamp

• Connection status of Bridge or lamps on KNX

• ETS product database entry with channel structure

• Simple integration into KNX

• Extensions via firmware updates

Philips and Hue are registered trade marks of Koninklijke Philips Electronics NV.

Information

Up to two Loewe televisions can be integrated via the gateway SMART CONNECT KNX Loewe into the KNX and adapted completely to meet your own requirements.

Features:

• Separate control of up to two televisions

• Television on/off

• Sound on/off

• Volume control

• Programme control

• PIP on/off

• Source selection

• Child protection on/off or age-dependently

• OSD text with pre-defined text (ETS) or from KNX (14 bytes)

• Simple integration into KNX (can be completely configured via ETS)

Information

Features:

• Separate control of up to four televisions

• Television on/off

• "Wake up" the TV device via Wake on LAN and then switch it on

• Volume control (switch sound on/off, increase or lower the volume or set the volume to the transferred value)

• Program control (change to the next or the previous program channel or change to a particular program channel)

• Transfer camera images, e.g. from an external camera

• Bookmark up to ten links

• Showing notices on the TV device: Use up to ten self-defined texts or dynamically display texts from other devices on the TV device, e.g. "Movement detected in garden" from an outside camera, display message as text

• Source selection (Flexibility of choice between the sources of the TV device, e.g. switch conveniently between HDMI input and receivers)

Information

From electricity meter to heating. With the SMART CONNECT KNX Programmable, third-party devices can be connected to the KNX bus in a simple and reliable way.

This enables individualised connection logic to be developed in just a few days.

The barrier to the world of building automation has never been this low.

Features:

• Programming of the application in C# or VB.Net

• Up to 64 KNX communication objects (variable bit length)

• Version 1-0004-005: 1x IP and 1x USB connection

• Version 1-0005-006: 2x IP connection

• Ready-certified KNX device (can be completely configured via ETS) *

• Extensions via firmware updates

The KNX certification for the SMART CONNECT KNX Programmable is limited to the interworking ability with KNX products from other manufacturers.

With the ise smart connect KNX Remote Access, KNX can be conveniently and safely accessed from anywhere around the world.

Whether via computer, tablet, or smart phone – you get safe communication completely without configuration! And installation is child’s play.

Simply connect ise smart connect KNX Remote Access to the KNX and you are done! Access is only possible via smart phone, tablet, or laptop.

Just start the ETS Secure Access Client that accesses the installation’s KNX IP interfaces.

Or the web browser, that let’s you access the local HTML pages. And further configuration? Unnecessary! That’s it.

Features:

• Secure data transmission of HTML and ETS communication, encrypted from the first packet
• Optimized KNX / IP communication also via mobile data connections usable
• Integrated IP interface with up to 3 tunnel connections (ETS bus- or group monitoring)
• Also maintain non-KNX systems remotely thanks to the integrated VPN
• Datalogger and timer functionality
• Configuration-free when using DHCP
• Access management with users and groups
• Supporting web based visualization applications
• Access to cameras and other web sites in the LAN
• For the latest version of ETS4 or ETS5

Information

Building automation and security technology combined flawlessly:

The world's first KNX connection (plug-in) for networking products from the Axis Communications company.

Note:

The plug-in can only be used on network devices from Axis Communications with ACAP support.

Features:

• Support of Axis network cameras

• Support of Axis WLAN cameras *

• Support of Axis D2050 -VE Network Radar Detector

• Support of Axis door stations

• Support of Axis network loudspeakers

• 30 group objects for sending from KNX to the Axis camera (1 bit)

• 30 group objects for sending from the Axis camera to KNX (variable bit length)

• Control of actions on the camera

Information

Integrate the innovative single-room control Fonterra Smart Control by viega via the gateway SMART CONNECT KNX viega into the KNX system.

Features:

• Support of 5 base stations each with up to 8 room temperature controllers and 12 outlets

• Room temperature control

• Switching between heating and cooling mode

• Power level control

• Absence control

• System information such as error messages, actual temperature or updates from viega

• Simple integration in KNX (can be completely configured via ETS)

• Extensions via firmware updates

If you wish to use the SMART CONNECT KNX viega, you must use Fonterra Smart Control for Fonterra surface temperature

regulating systems in Version 3 or higher with firmware version 2.8-4.43 or higher, supplied by Viega GmbH & Co. KG.

• Power supply: via KNX Bus line, 20VDC
• Rated voltage: 120V AC +10%/-15%, 50/60 Hz
• Rated current:
  • 2-channel: 2x1.3A@cosФ=1.0
  • 1-channel: 1x2.2A@cosФ=1.0
• N-system DIN-rail mounted device, width:4MU(1MU=18mm)
• Load output:
  

  Lamp type	2 channels	1 channel
  Incandescent lamps	150 W	250 W
  Low voltage halogen lamps with magnetic transformers	120 VA	200 VA
  Dimmable LED	<= 50 VA	<=50 VA

Intesis INKNXUNI001I000 allows monitoring and control of Air Conditioners from KNX installations.

• Compatible with most AC units with an IR receiver.
• Great flexibility of integration into your KNX projects.
• Configuration is made directly from ETS, the database of the device comes with a complete set of communication objects allowing, from a simple and quick integration using the basic objects, allowing a simple and quick integration.

Check compatible AC units in the description.

• Thermoplastic material, halogen-free
• Dimensional stability: -5 … 60 ºC
• Compliance:

-2014/35/EU (low voltage directive)

-2011/65/EU (RoHS directive)

-Standards: UNE EN 60670-1

• Thermoplastic material, halogen-free
• Dimensional stability: -5 … 60 ºC
• Compliance:

-2014/35/EU (low voltage directive)

-2011/65/EU (RoHS directive)

-Standards: UNE EN 60670-1

• The DALI push-button input 4-fold flush-mounted 141/71 is a binary input device for insertion into a flush-mounted box.
• The device is powered via the connected DALI cable
• The device offers 4 input channels for potential-free contacts
• Installation switches or installation push-buttons can be connected. The required voltage is supplied by the DALI push-button input 4-fold (no additional voltage source required).
• Triggered by the connected push-buttons or switches, the DALI push-button input 4-fold sends telegrams via the DALI line to a central DALI controller. 

• The push button interface is a binary input and output device for installation in in-wall boxes (Æ 60 mm, depth: 40 mm).
• Each of the two channels may be used either as an input for potential-free switch / push button contacts or as an output for control of a light emitting diode (LED).
• The required scanning / control voltage is provided by the push button interface (requires no additional power supply).
• For example, up to 2 switches/push buttons with one potential-free contact each or one 2-fold push button with two potential-free contacts may be connected to a push button interface.
• The connection is carried out via a cable set which is permanently connected to the push button interface.
• The connecting cables between switches/push buttons and the push button interface may be extended up to 10 m. It must be ensured that twisted cable pairs are used.
• Commands can be given to actuators via the connected switches/push buttons, e.g. for defined switching on/off, for dimming fluorescent lamps or for raising/lowering venetian blinds and adjusting the louvres.
• Each channel, which is configured as an output, can drive an output current of up to 2mA for controlling a light emitting diode (LED).
• With the ETS the application program is selected, its parameters and addresses are assigned appropriately, and downloaded to the push button interface.

• The push button interface is a binary input and output devices for installation in in-wall boxes (Æ60 mm, depth: 40 mm).
• Each of the four channels may be used either as an input for potential-free switch / push button contacts or as an output for control of a light emitting diode (LED).
• The required scanning / control voltage is provided by the push button interface (requires no additional power supply).

Presence / Motion detector

• The detector senses the presence of a person or that there is no longer anyone in its detection area.
• The detector signal can be analyzed via two separate communication channels, termed motion detector and presence detector.
• The detection range is identical for all channels. Each channel can be locked individually via objects.

HVAC detector

• The detector has an additional control output for HVAC applications.
• For example, this function can switch systems that are used for heating, ventilating and climate control (HVAC) of the room from “Energy saving mode” in an unused room to “Comfort mode” in an occupied room and back to “Energy saving mode”, when the room is again unoccupied.
• Functionality of the Presence detector / Motion detector / HVAC-detector
• For each detector channel 4 communication objects are available, in sum 12 different communication objects. 
• It is possible to send one or two KNX telegrams at the beginning and at the end of a detected presence, according to configuration. 
• The values of the communication objects are configured for each functional block (motion detector, presence detector, HVAC-detector) via corresponding parameters.

Presence detector with brightness sensor for detection of motion and presence for ceiling mounting

• Contrast measurement of brightness
• Presence motion detection up to Ø8 m
• Flush mounted installation in ceilings with wall box or clamps
• Integrated IR receiver for IR remote control

Functions with commission with ETS

• Three independent output channels with four commands each in case of motion detection
• Integrated 2-level light controller (switching)
• Integrated constant light level controller for up to five lighting groups including
• Usage of motion detector as standalone mode or extension mode to cover wider areas
• Independent output channel for HVAC applications