Products
Shelly Plus Wall Dimmer (The Device) can switch on/off and vary the brightness of compatible dimmable lights.
It can be easily wired in the place of a standard US light switch.
Enhanced with all the gen2 firmware flexibility, it provides professional integrators with additional options for end customer solutions. It can work standalone in a local Wi-Fi network, or it can also be operated through cloud home automation services.
Shelly Plus Wall Dimmer can be accessed, set up and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
The Device has an embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
The Device controls on/off function for one electrical appliance, e.g., bulb, ceiling fan, IR heater, electrical locks, garage doors, irrigation system, etc.
The output contact is potential-free (dry contact), so different power supply loads (up to 16 A) can be connected to the Device.
It is compatible with push-buttons and switches (default).
The Device is a single product that enables the control of the on/off function for one electrical appliance such as bulb, ceiling fan, IR heater (with load up to 15 A).
It measures power consumption of the connected device.
The Device is compatible with switches (default) and push-buttons.
The Wave 2PM (Device) is a single product that enables remote control of two electrical devices such as bulbs, ceiling fans, and IR heaters.
It switches (on/off) two independent loads and measures their power consumption separately and in total.
The Device is compatible with switches (default) and push-buttons.
The Device is a DIN rail mountable 2-channel smart switch with power measurement.
It controls the on/off function for two independent electrical devices with a load up to 16 A per channel (25 A in total).
It is compatible with switches (default) and push-buttons.
The Device is a DIN rail mountable and enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
The Device enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
Perfect integration of Axis network devices into application scenarios.
Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.
Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.
Third-party applications on the camera can also communicate with KNX.
In addition to network cameras, all Axis network devices with ACAP are also supported.
Perfect integration of Axis network devices into application scenarios.
Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.
Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.
Third-party applications on the camera can also communicate with KNX.
In addition to network cameras, all Axis network devices with ACAP are also supported
Perfect integration of Axis network devices into application scenarios.
Stronger combination of both systems. Motion detector (KNX) starts the action or Cross Line Detection (camera) switches on the light.
Private sphere (masking) can be controlled via KNX, for instance, through presence and absence Camera responds directly to KNX/IP after successful installation.
Third-party applications on the camera can also communicate with KNX.
In addition to network cameras, all Axis network devices with ACAP are also supported
Information
Via the SMART CONNECT KNX e-charge II, up to five compatible charging points can be integrated into
the KNX system.
You can find a list of compatible models on our product page.
Features:
• Integration of five charging points per device (completely configurable in ETS)
• Prioritisation of one charging point
• Dynamic load management (DLM)
• Static load management (SLM)
• Mixed operation with various manufacturers
• Support for external electricity meters (ISKRA, PHOENIX CONTACT, generic) at charging points which are not equipped with an integrated electricity meter.
• Grid-supporting control
• Integrated RS485 adapter
• Charging status values: Charging point status (status), Connected (status), Charging (status), Charging complete (status), Interrupt (set/status), Start/Stop (set/status), Unlock (set)
• Charging current status values: Target (status/set), Actual L1 - L3, Actual (status)
• Power status values: Actual L1 - L3, Actual (status)
• Energy status values: Actual L1 - L3, Actual (status)
• Energy consumption status values: Last charge (status), Total (status)
• Fault status values: Fault, Last fault
• Status values: Communication ID (EVCCID) (status), Charging point internal temperature (status), Temperature warning, RFID tag (status), Serial number, Charging point firmware version
• KNX Secure
• Expandable via firmware updates
Information
Operate the Philips Hue lighting system via KNX. Colour value, temperature and brightness can be defined for every light, making each completely customisable.
Features:
• Separate control of up to 25 Philips Hue lights
• Support of up to five Philips Hue Bridges per device
• Switching and dimming
• Individual control of RGB colour values
• Individual control of the colour temperature
• Configuration of switch-on brightness per lamp via ETS or device website
• Configuration of dimming behaviour per lamp via ETS or device website
• Calling up Philips Hue scenes
• Signal flashing of Philips Hue scenes (specific duration, return to original state)
• Alert flash per lamp
• Colour gradient function per lamp
• Connection status of Bridge or lamps on KNX
• ETS product database entry with channel structure
• Simple integration into KNX
• Extensions via firmware updates
Philips and Hue are registered trade marks of Koninklijke Philips Electronics NV.
Information
Up to two Loewe televisions can be integrated via the gateway SMART CONNECT KNX Loewe into the KNX and adapted completely to meet your own requirements.
Features:
• Separate control of up to two televisions
• Television on/off
• Sound on/off
• Volume control
• Programme control
• PIP on/off
• Source selection
• Child protection on/off or age-dependently
• OSD text with pre-defined text (ETS) or from KNX (14 bytes)
• Simple integration into KNX (can be completely configured via ETS)
Information
Features:
• Separate control of up to four televisions
• Television on/off
• "Wake up" the TV device via Wake on LAN and then switch it on
• Volume control (switch sound on/off, increase or lower the volume or set the volume to the transferred value)
• Program control (change to the next or the previous program channel or change to a particular program channel)
• Transfer camera images, e.g. from an external camera
• Bookmark up to ten links
• Showing notices on the TV device: Use up to ten self-defined texts or dynamically display texts from other devices on the TV device, e.g. "Movement detected in garden" from an outside camera, display message as text
• Source selection (Flexibility of choice between the sources of the TV device, e.g. switch conveniently between HDMI input and receivers)
Information
From electricity meter to heating. With the SMART CONNECT KNX Programmable, third-party devices can be connected to the KNX bus in a simple and reliable way.
This enables individualised connection logic to be developed in just a few days.
The barrier to the world of building automation has never been this low.
Features:
• Programming of the application in C# or VB.Net
• Up to 64 KNX communication objects (variable bit length)
• Version 1-0004-005: 1x IP and 1x USB connection
• Version 1-0005-006: 2x IP connection
• Ready-certified KNX device (can be completely configured via ETS) *
• Extensions via firmware updates
The KNX certification for the SMART CONNECT KNX Programmable is limited to the interworking ability with KNX products from other manufacturers.
With the ise smart connect KNX Remote Access, KNX can be conveniently and safely accessed from anywhere around the world.
Whether via computer, tablet, or smart phone – you get safe communication completely without configuration! And installation is child’s play.
Simply connect ise smart connect KNX Remote Access to the KNX and you are done! Access is only possible via smart phone, tablet, or laptop.
Just start the ETS Secure Access Client that accesses the installation’s KNX IP interfaces.
Or the web browser, that let’s you access the local HTML pages. And further configuration? Unnecessary! That’s it.
Features:
- Secure data transmission of HTML and ETS communication, encrypted from the first packet
- Optimized KNX / IP communication also via mobile data connections usable
- Integrated IP interface with up to 3 tunnel connections (ETS bus- or group monitoring)
- Also maintain non-KNX systems remotely thanks to the integrated VPN
- Datalogger and timer functionality
- Configuration-free when using DHCP
- Access management with users and groups
- Supporting web based visualization applications
- Access to cameras and other web sites in the LAN
- For the latest version of ETS4 or ETS5
Information
Building automation and security technology combined flawlessly:
The world's first KNX connection (plug-in) for networking products from the Axis Communications company.
Note:
The plug-in can only be used on network devices from Axis Communications with ACAP support.
Features:
• Support of Axis network cameras
• Support of Axis WLAN cameras *
• Support of Axis D2050 -VE Network Radar Detector
• Support of Axis door stations
• Support of Axis network loudspeakers
• 30 group objects for sending from KNX to the Axis camera (1 bit)
• 30 group objects for sending from the Axis camera to KNX (variable bit length)
• Control of actions on the camera
Information
Integrate the innovative single-room control Fonterra Smart Control by viega via the gateway SMART CONNECT KNX viega into the KNX system.
Features:
• Support of 5 base stations each with up to 8 room temperature controllers and 12 outlets
• Room temperature control
• Switching between heating and cooling mode
• Power level control
• Absence control
• System information such as error messages, actual temperature or updates from viega
• Simple integration in KNX (can be completely configured via ETS)
• Extensions via firmware updates
If you wish to use the SMART CONNECT KNX viega, you must use Fonterra Smart Control for Fonterra surface temperature
regulating systems in Version 3 or higher with firmware version 2.8-4.43 or higher, supplied by Viega GmbH & Co. KG.
- Power supply: via KNX Bus line, 20VDC
- Rated voltage: 120V AC +10%/-15%, 50/60 Hz
- Rated current:
- 2-channel: 2x1.3A@cosФ=1.0
- 1-channel: 1x2.2A@cosФ=1.0
- N-system DIN-rail mounted device, width:4MU(1MU=18mm)
- Load output:Lamp type2 channels1 channel
Incandescent lamps 150 W250 WLow voltage halogen lamps
with magnetic transformers
120 VA200 VADimmable LED <= 50 VA<=50 VA
Intesis INKNXUNI001I000 allows monitoring and control of Air Conditioners from KNX installations.
- Compatible with most AC units with an IR receiver.
- Great flexibility of integration into your KNX projects.
- Configuration is made directly from ETS, the database of the device comes with a complete set of communication objects allowing, from a simple and quick integration using the basic objects, allowing a simple and quick integration.
Check compatible AC units in the description.
