Newest Products

All-in-one KNX ceiling sensor combining presence detection and full air quality monitoring — CO₂, PM2.5, PM10, TVOC, formaldehyde, humidity, temperature, and brightness in a single device, depending on the version. 

Covers up to 15.5m diameter at a max mounting height of 6m.

Supports 4 presence channels, constant lighting control, scenes, logic functions, and RTC.

Powered by KNX bus + auxiliary.

Available in black or white.

Single-run cable for RGB+TW LED installations. 16AWG stranded bare copper keeps voltage drop under control on long runs — no derating, no color shift at the fixture end.

• Built-in DALI-2 interface, DALI DT8 device
• Dimmable LED driver with linear metal housing. Max. output power 60W
• 900-1700mA current selectable via NFC program tool. Min.current gear lower to 0.1mA
• DALI Address/Group/Scene setting via NFC program tool.
• Class Ⅱ power supply, isolated design
• High power factor and efficiency
• To switch and dim LED lighting luminaries, enable tunable white control
• Amplitude/CCR dimming, smooth and deep dimming
• Compatible with universal DALI masters that support DT8 commands
• DALI-251/252/253 Enabled
• IP20 rating, suitable for indoor LED lighting applications
• 5 years warranty

• Single-phase energy meter.
• Up to 45 A direct measurement.
• Real-time data. Modbus RS485 ready.
• Perfect for panels, EV chargers, and monitoring.

• Push-in jumper bar for WAGO terminal blocks
• Quick and secure tool-free bridging
• Light gray finish
• Enables fast electrical connection between adjacent terminals
• Ideal for compact and organized panel wiring

• End and intermediate plate for terminal blocks
• 0.8 mm thickness
• Durable gray insulating material
• Designed for WAGO terminal systems
• Provides electrical isolation and terminal separation

• Push-in connector with CAGE CLAMP® technology
• Fast, tool-free wiring installation
• Supports 22–12 AWG copper conductors
• Rated up to 600 V / 20 A
• UL 1059 and CSA 22.2 No.158 certified
• High-strength polyamide (PA66) housing
• UL94 V0 flame resistance rating
• Operating temperature –60 °C to +105 °C

• Push-in terminal connector with CAGE CLAMP® technology

• Fast, tool-free wiring installation

• Supports 22–14 AWG copper conductors

• Rated up to 600 V / 15 A

• UL 1059 and CSA 22.2 No.158 certified

• High-temperature resistant polyamide housing

• Operating temperature –60 °C to +105 °C

• Ideal for professional electrical installations

The Siemens TC5 KNX Touch Panel is a powerful 5” capacitive touchscreen interface designed for intuitive control of lighting, blinds, HVAC and scenes in KNX smart buildings.

It provides real-time visualization of environmental data such as temperature, humidity and air quality while allowing users to manage automation functions directly from a modern wall-mounted interface.

Ideal for residential, hospitality and commercial KNX projects, the TC5 offers flexible configuration, customizable pages and seamless integration with KNX systems.

Accurate detection of presence and minor motion states

It is a mmWave radar sensor capable of detecting human presence, equipped with autonomous driving-level FMCW frequency-modulated radar chips, and utilizes Creatrol's exclusive algorithm to confirm human status by assessing breathing patterns.

It has a built-in 0-32000Lux digital illuminance measurement chip to simultaneously detect ambient light.

The detection range and sensitivity are independently and continuously adjustable.

Designed Specifically for Smart Lighting Control Scenarios

It can accurately detect human presence and subtle movements, confirm human status by analyzing breathing patterns, and monitor ambient light intensity in real-time to automatically adjust lighting brightness.

The product supports integration with the DALI system, achieving single control of 64 lighting circuits, providing flexible lighting management solutions.

Solid 14-10 AWG soft, uncoated copper, per ASTM-B3; Class 2 and Class 3 - Solid 16 AWG soft, uncoated copper, per ASTM-B3

KNX weather station with sensors for:

• brightness
• wind (speed, direction)
• precipitation
• temperature
• humidity
• air pressure

Time reception (sun position), shading control, timer, multifunctional modules, and logic gates.

🚀 PRE-ORDER NOW at SPECIAL PRICE!
Available in Summer 2026

Required additional hardware

1Home Touch works as an extension to the following devices:

• 1Home Server KNX Pro
• 1Home Server KNX
• 1Home Server KNX Bridge
• 1Home Server CH
• 1Home Voice & Visu

1Home Touch — Smart Touch Panel for KNX Homes

• 4” smart touchscreen for KNX homes
• Automatic configuration via 1Home Server
• Customizable interface and themes
• Scene, lighting, and device control
• Built-in SIP intercom
• Proximity sensor for screen activation

Support：

• Input Signal：DALI-2

• Input Voltage：100-240V

• Input Current：Max.6.4A

• Output Voltage：4×(100-240)V

• Output Current：4CH×1.6A,Max6.4A

• Output Power：4CH×(0-160...384)W Max. 1536W

• Working Temp.：-25℃-50℃

• Waterproof Rating：IP67

• Protection：Short-circuit protection, over-temperature protection, over-current protection, self-recoverable

• Warraty： 5 years

• Certification： UL,BIS,FCC EMC,TUV,CE EMC,RoHS

Parameter Settings:

1.NFC configures full DALI command parameters such as DALI address, dimming curve, brightness range, dimming fade time, power-on state, system failure state, group, and scene. It also supports product fault diagnosis and parameter restoration/replacement.

2.Button configures DALI address

3.Third-party standard DALI system configuration

Support：

• Input Signal：DALI 2

• Input Voltage：12-48V

• Input Current：Max.20.5A

• Output Voltage：4×(12-48)V

• Output Current：2×(4CH×2.5A) Max.20A

• Output Power：4CH×(0-60...240)W Max. 960W

• Working Temp.：-20℃-50℃

• Waterproof Rating：IP67

• Protection：Short-circuit protection, over-temperature protection, over-current protection, self-recoverable

• Warraty： 5 years

• Certification： UL,BIS,FCC EMC,TUV,CE EMC,RoHS

Parameter Settings:

1.NFC configures full DALI command parameters such as DALI address, dimming curve, brightness range, dimming fade time, power-on state, system failure state, group, and scene. It also supports product fault diagnosis and parameter restoration/replacement.

2.Button configures DALI address

3.Third-party standard DALI system configuration

Support：

• Dimming Interface: DALI-2, Push DIM

• Input Voltage: 120-277Vac

• Power Factor:  PF>0.99/120Vac, PF>0.95/230Vac, 

• PF>0.9/277Vac (at full load)

• Efficiency: 90%

• Fluctuation Level: High frequency exemption level.

• Output Voltage: 24Vdc

• Output Current: Max. 5A

• Output Power: 0-60W

• Dimming Range: 0~100%, down to 0.1%

• Certification: FCC,CE,ROHS,UL

• Product Size：293×43×30mm

• Warranty: 5 years（Rubycon capacitor）

Support:

• Communication Methods: Bluetooth BLE, NFC protocol

• Operating Voltage: 5Vdc

• Operating Current: 500mA

• Operating Temperature: 0℃~40℃

• It supports standalone operation or connection to a mobile app via Bluetooth, with built-in all debugging functions of a DALI host.

• No power supply is required for operation, enabling convenient and efficient batch reading/writing of power current as well as programming and setting of numerous parameter configurations, featuring powerful functionality.

• Product Size：69×104×12.5mm

• Product Weight：55g

This gateway offers a cloud-based solution for remote control of air conditioning units with an infrared receiver.

AC Cloud Control is a mobile/web application for professional control of multibrand and multisite projects from one single dashboard,

enhancing the user experience and optimizing the building's energy usage.