Best Selling Products

NETIO PowerPDU 8KS is smart 19" 1U PDU with RJ45 LAN & web interface .

8 power outputs (C13) / 1 power input (C20).

Total & Output 1 metering, each output is switched and metered individually, Web interface, HTTPs, ZVS. 

Several M2M APIs (SNMPv1 & MQTT-flex supported), NETIO Coud.

19" montage holders included.

US power cord included.

The MDT Time Switch with 20 channels (8 cycle times for each channel) has a daily- / weekly- / astro switching function and an adequate power reserve if the bus voltage fails.

The cycle times of the single channels are adjustable by the ETS or can be set directly at the device.

The large active color display for comfortable handling allows direct switching of the 20 channels (manual mode).

Total up to 32 KNX channels and 32 CASAMBI scenes can be registered in the gateway, which to implement:

• Unidirectional KNX -> CASAMBI, up to 16
• Unidirectional CASAMBI -> KNX, up to 16  
• Bidirectional CASAMBI <-> KNX, up to 16
• It also can control scene on/off and dimming in KNX -> CASAMBI direction.

Device to manage and integrate units remotely from the Cloud.

Online control with the “Airzone Cloud” App (available for iOS and Android).

Wireless Wi-Fi connection.

Self-powered by external power supply provided.

Features:

• Control of the parameters of the unit.

• Dual Wi-FI communications (2.4/5 GHz).

• Possibility of integration via Local API and Cloud API.

• Communication errors detection.

• Temperature and operating mode time schedules.

• Multi-user and multi-session.

• Port for integration via Modbus/BACnet protocol.

• Cloud and/or third party smart thermostat integrations (3PTI).

• On/Off input and auxiliary heat output.

• Automatic mode change.

• Temperature limits for hot and cold.

Set the operating temperature using the Hisense thermostat probe measurement.

Access the function selection and set value 1 in parameter C8 (refer to the installation manual).

Disconnect the indoor unit and follow the assembly steps:Screw attachment or double-sided adhesive attachment.

Connect the Aidoo to the KNX bus and the indoor unit terminals using the supplied cable.

Power the indoor unit and check the LED indicators (refer to the self-diagnosis section).

Configure the device in ETS using the provided database.

(Optional) Configuration to impose temperature:

An external device with a temperature probe (e.g., KNX thermostat) is required.

Autonomous mode: Aidoo operates as the master and can impose the room temperature from the external probe without specific configuration.

Master-slave mode: The unit’s thermostat must be configured as a slave (parameter F2 set to “Sub”).

This summary highlights the key points for installing and configuring the device.

Dive into the world of smart building technology with our streamlined KNX Certified Training.

This course offers essential knowledge and hands-on experience in KNX, a leading standard in home and building automation.

Key Benefits:

• In-Depth Knowledge: Learn the fundamentals and advanced aspects of KNX from industry experts.
• Practical Skills: Gain hands-on experience with KNX systems for real-world application.
• Global Recognition: Earn a certification recognized worldwide, enhancing your career prospects.
• Professional Growth: Boost your marketability and credibility in the smart technology sector.

Ideal for professionals seeking to advance in smart building, our KNX Training is your gateway to becoming a part of this innovative field.

More info: https://www.wolfbtech.com/knx-training/#

The Siemens Industry Gamma Lighting Control Enclosures support Gamma Lighting system components and other panel-mounted devices that snap into DIN rails.

Specially designed to accommodate the different DIN rail-based KNX modules, regardless of the manufacturer.

The following table provides ordering information:

Enclosure Type: UL and cUL Certified NEMA Type 1 Industrial Control Enclosure

Compact bus powered interface between LAN/Ethernet and KNX bus.

Application area

The KNX IP Interface 732 secure with its compact design has a width of only 1 module (18 mm) and is powered by the KNX bus.

The device is an interface between IP and KNX and can be used as programming interface for ETS®

Software.

You can access the KNX Bus from every point of your LAN.

Furthermore, the KNX IP Interface 732 secure allows you to program the KNX bus over the Internet.

The device supports KNX Security which can be enabled in ETS. 

With its interface functionality (tunneling) KNX security prevents from unauthorized access.

The buttons and LEDs on the device allow a local diagnosis including the operating status and communication errors.

Compact bus powered interface between LAN/Ethernet and KNX bus.

Application area

The KNX IP Interface 731 is a compact interface used to connect a PC to the KNX network.

The connection is made through LAN (IP).

Power is supplied via the KNX bus.

The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively.

This device works according to the KNXnet/IP specification using the core, the device management and the tunneling part.

The buttons are for diagnostic purposes.

The LEDs indicate the operating status and communication errors on the bus.

• Communication interface between DALI systems and the configuration software tool: DALI Cockpit.
•  Bidirectional data communication for DALI bus monitoring, configuration and control.
• Support of the Standard DALI protocol, DALI-2 protocol, and various extended DALI protocols
•  USB and DALI-line are galvanically isolated.
• Supply via DALI-line and USB interface
• Various types available: Standart, mini, with integrated 30mA bus, power supply, DALI-2 version with integrated 30mA bus power supply, for DIN rail mounting, for DIN rail mounting with flash memory, wireless
• 2 sets of DALI terminals for easy connection - signal line can be looped through

• The KNX/DALI Gateway communicates with up to 64
• DALI actuators per channel. These can be connected and dimmed in up to 16 groups per channel.
• The gateway also supports selected sensors with DALI interface.
• It also records and transfers DALI status and error messages.
• An individual name, a group, parameter and scenes are assigned to individual DALI ECG´s during commissioning with the ETS (Engineering Tool Software).
• DALI sensors and their functionality are also assigned in the ETS.
• All DALI subscribers and functions are independent and can be linked via group addresses.
• The device can only be operated in DALI segments with connected ECGs and sensors and not with further DALI controllers within the segment (no multi-master mode).
• The power needed for ECGs and sensors is supplied directly through the gateway. An additional DALI power supply is not required, neither is it permitted.

Wall mount box for DIVUS CIRCLE small and DIVUS CIRCLE small +

Finding that the MICRO PUSH WIRE® Connectors for Junction Boxes are ideal for DIN-rail-mount panel applications, electrical installers have requested the ability to use them in distribution panels.

These connectors provide easy connections for smaller conductors used in low-current applications.

They are well-suited to terminating telephone-style conductors for connecting alarms, bells, door sensors, communication systems and more.

DALI LED Dimmer (CV, DT8) for the control of tunable white luminaires (CW-WW).

•  24V DC Power Supply
• maximum output current 300mA
• DIN Rail Module
• with Status LED

Glass cover frame assortment 55.

The MDT Logic Module is used for fast and easy compilation of logic functions to control building automation systems.

All the functions are parametrized directly in the ETS without additionally software tools.

There are 24 independent function blocks with arbitrary functions available.

For each function a description can be stored in the ETS.

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.