Best Selling Products

Black / red

For solid core cables 0.6 - 0.8 mm²

Packaging unit: 50 pieces

The MDT Time Switch with 20 channels (8 cycle times for each channel) has a daily- / weekly- / astro switching function and an adequate power reserve if the bus voltage fails.

The cycle times of the single channels are adjustable by the ETS or can be set directly at the device.

The large active color display for comfortable handling allows direct switching of the 20 channels (manual mode).

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

The IP Interface enables the communication between the PC and the KNX / EIB system via LAN.

The KNX IP Interface allows to programm the KNX bus via TCP / IP, 4 simultaneous connections possible.

Glass cover frame assortment 55.

MDT Rocker for the KNX Push Button Light 55.

MDT Frame 1 gang for assortment 55, IT/US, White glossy finish.

Design frame 1 gang, incl.

Installation frame type E international, for the assortment 55. 

The Push-button Smart 86 has six mechanical buttons with finger recesses.

The push-button can be used to map up to 12 functions plus the “slap function”.

The buttons are labelled individually using symbols and texts on the large active colour display.

The status of the respective function can be detected both on the display and via the RGB display of the buttons. 

The MDT Logic Module is used for fast and easy compilation of logic functions to control building automation systems.

All the functions are parametrized directly in the ETS without additionally software tools.

There are 24 independent function blocks with arbitrary functions available.

For each function a description can be stored in the ETS.

Designed for bidirectional Data exchange between Modbus RTU- and KNX-products.

The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.

The comprehensive application provides the suitable parameters for various applications.

Versions for floating contacts, 24 V AC/DC and 230 V AC are available.

MDT Glass frame 1 gang, for 55 mm systems, White.

Frames for assortment 55.

Dimensions (H x W): 92 x 92 mm.

Suitable for 55 mm switch ranges e.g.

The MDT Push-button Lite 55 is a neutral KNX push-button with vertically arranged 2 button operation and colour-adjustable status LEDs.

The buttons can be set as 2 button operation (two-surface) or 1 button operation.

Each push-button surface has 2 RGBW status LEDs. 

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).

Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.

MDT metal installation frame type E.

The installation frame type E is suitable for the following installation boxes: Legrand 503E, Vimar V71703, Legrand 1-Gang Low Voltage Swing Bracket for Retrofit, Carlon 1 gang US Box, Kaiser 662.

Dimensions (H x W x D): 77 x 100 x 1 mm.

The MDT Push-button Lite 55 is a neutral KNX push-button with vertically arranged 2 button operation and colour-adjustable status LEDs.

The buttons can be set as 2 button operation (two-surface) or 1 button operation.

Each push-button surface has 2 RGBW status LEDs.

Aside from switching, dimming, shutter or sending values, there are numerous functions to choose from. The Push-button Lite 55 has 4 integrated logic blocks.

The MDT Push-button Lite 55 is a neutral KNX push-button with vertically arranged 2 button operation and colour-adjustable status LEDs.

The buttons can be set as 2 button operation (two-surface) or 1 button operation.

Each push-button surface has 2 RGBW status LEDs.

Aside from switching, dimming, shutter or sending values, there are numerous functions to choose from. The Push-button Lite 55 has 4 integrated logic blocks.

The MDT Push-button Lite 55 is a neutral KNX push-button with vertically arranged 2 button operation and colour-adjustable status LEDs.

The buttons can be set as 2 button operation (two-surface) or 1 button operation.

Each push-button surface has 2 RGBW status LEDs.

Aside from switching, dimming, shutter or sending values, there are numerous functions to choose from. The Push-button Lite 55 has 4 integrated logic blocks.

The MDT Push-button Lite 55 is a neutral KNX push-button with vertically arranged 2 button operation and colour-adjustable status LEDs.

The buttons can be set as 2 button operation (two-surface) or 1 button operation.

Each push-button surface has 2 RGBW status LEDs.

Aside from switching, dimming, shutter or sending values, there are numerous functions to choose from. The Push-button Lite 55 has 4 integrated logic blocks.