Newest Products
Module with a serial interface to communicate with components in a DALI-line via RS232
- Easy connection of a PC or a PLC to a DALI system
- Bidirectional data traffic
- Addressing, configuration, status queries and monitoring
- Support for various proprietary DALI protocol extensions
- Galvanic isolation
- Supply via mains voltage
- Integrated bus supply
- Double DALI terminals for remote ceiling version (Art.Nr: 24166096-PS-DE and 24166096-LU-PS-DE)
- DALI-2 version with NEW protocol: LUBA (Lunatone Universal Building Module with serial interface to communicate with the DALI bus via RS232.
- Hardware Specifications (AP-1004HA)
- CPU: Intel Celeron
- Memory: 1 x SODIMM slot, supports DDR3L 1066/1333/1600MHz
- Storage: Supports 1 x internal SATA 2.5" HDD and 1 x mSATA slot
- Design: Fanless, low-power design
- Interfaces:
- 1 x VGA 1 x HDMI 2 x USB 2.0 2 x USB 3.0 2 x COM (RS232) 2 x LAN 1 x AUDIO
- Expansion: Supports 1 x MINI-PCIe slot
- Home Assistant pre installed
The dimmer with LED constant voltage drive can drive LED directly, has four channels, each channel is independent.
The output can connect with some big power dimmable LED lights. These LEDs can be switched, dimmed, recall scene or other operations via the bus.
The devices adopt PUSH terminals to achieve electrical connection; the connection to the EIB/KNX bus is established via a bus connecting terminal. The input need connect a 12V-36V DC operation voltage.
The Device is a DIN rail mountable and enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
The Device is a DIN rail mountable 2-channel smart switch with power measurement.
It controls the on/off function for two independent electrical devices with a load up to 16 A per channel (25 A in total).
It is compatible with switches (default) and push-buttons.
The Device enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
The Wave 2PM (Device) is a single product that enables remote control of two electrical devices such as bulbs, ceiling fans, and IR heaters.
It switches (on/off) two independent loads and measures their power consumption separately and in total.
The Device is compatible with switches (default) and push-buttons.
The Device is a single product that enables the control of the on/off function for one electrical appliance such as bulb, ceiling fan, IR heater (with load up to 15 A).
It measures power consumption of the connected device.
The Device is compatible with switches (default) and push-buttons.
The Device controls on/off function for one electrical appliance, e.g., bulb, ceiling fan, IR heater, electrical locks, garage doors, irrigation system, etc.
The output contact is potential-free (dry contact), so different power supply loads (up to 16 A) can be connected to the Device.
It is compatible with push-buttons and switches (default).
Shelly Plus Wall Dimmer (The Device) can switch on/off and vary the brightness of compatible dimmable lights.
It can be easily wired in the place of a standard US light switch.
Enhanced with all the gen2 firmware flexibility, it provides professional integrators with additional options for end customer solutions. It can work standalone in a local Wi-Fi network, or it can also be operated through cloud home automation services.
Shelly Plus Wall Dimmer can be accessed, set up and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
The Device has an embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Shelly Plus i4 is a smart Wi-Fi switch input that allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios.
You can use Shelly Plus i4 to control other connected Shelly switches, sensors, or HTTP and MQTT-controlled devices.
Small enough to fit behind every wall switch, Shelly Plus i4 can show the status and control the action of four inputs.
You can access and monitor Shelly Plus i4 remotely from any place where you have internet connectivity, if the Device is connected to a Wi-Fi router and the Internet.
You can retrofit the Device into standard electrical wall boxes, behind power sockets, light switches, or into other places with limited space.
Shelly Plus i4 has an embedded Web Interface that you can use to control it and set it up.
Shelly Plus 1PM is a small form factor smart switch with power measurement, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system.
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1PM can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1PM has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Shelly Plus 1 is a small form factor smart switch with potential-free contacts, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system.
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1 can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1 has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Wall mount box for DIVUS CIRCLE small and DIVUS CIRCLE small +
Our PUSH WIRE® connection uses the stiffness of the conductor to overcome the clamping spring's contact force, allowing you to clamp the conductor in place more quickly and easily.
Dimensions: 18.4 x 6.8 x 10 mm (width x height x depth).
Simple and fast: The PUSH WIRE® plug-in terminal connection is the uncomplicated and fast way to connect a kink-resistant conductor.
The dimensions are (10 x 11.5 x 10) mm in width x height x depth.
The surface of the contacts is made of tin.
Finding that the MICRO PUSH WIRE® Connectors for Junction Boxes are ideal for DIN-rail-mount panel applications, electrical installers have requested the ability to use them in distribution panels.
These connectors provide easy connections for smaller conductors used in low-current applications.
They are well-suited to terminating telephone-style conductors for connecting alarms, bells, door sensors, communication systems and more.
Color LCD Screen, 0.96", resolution 80*160, panel thickness:10.4mm,built-in temperature sensor, Proximity sensor, RGB color LED indicator.
Full KNX functions including switch, dimming, shutter,scene control, value sending, RGB,RGBW,Color Temp. control, shift register, Multiple operation, Delay mode. Max. 8 group event,8 logic functions.
Support display in text or icon or textticon.
Power: KNX Bus only; Consumption: bus 15mA
Installation:wall mounted, fits in 86*86mm, 80*80mm, German Round (® 60mm) wall boxes.
Color option: Black, White
KNX TP 4-fold LED dimming actuator, CC or CV
- 12..24 V⎓ / Max. load current: 6 A total, freely distributable PWM dimming actuator (for CV)
- 12..48 V⎓ / Max. configurable load current: 500 mA each channel (channels can be bundled) (for CC)
- RGB, RGBW, Tunable White
- Scene support, sequencer, staircase function, adjustable dimming curve
- Integrated logic and time functions
- Support of KNX Securtity
- Connectors: KNX, plugable screw connectors for IO
- Size (LxWxH): 132 x 46 x 20 mm
Expansion module for Iddero touch panels and Iddero Home Server.
Allows for remote access to the installation from a GSM terminal, providing functionality such as alarm and event notification, or remote control of devices.
- Flexible execution of actions, scenes, and status requests through SMS messages
- Execution of configured actions upon reception of a lost calls
- Notification of alarms and events through SMS messages
- Authorized numbers list with configurable permissions
- DIN-rail mounted
- Pluggable terminal blocks to simplify wiring during the installation process
- Power supply shared with touch panel or Iddero Home Server
- Low power consumption
Expert picks
Newest Products
KNX Training
