Newest Products
Installation height: 2 ~ 4m
Detection angle: 360 °
Detection distance: when the installation height is 4.0m
Detection diameter ≤ 8.0m
Illumination sensor: 0 ~ 32000 Lux
Product size: φ43mm * 35mm
Opening size: φ35mm
Power supply: KNX 30V(＜10mA)
Installation height: 2 ~ 4m
Detection angle: 20 °
Detection distance: when the installation height is 2.5m
Detection range is shown in the figure.
Illumination sensor: 0 ~ 32000 Lux
Product size: φ43mm * 35mm
Opening size: φ35mm
Power supply: KNX 30V(＜10mA)
Installation height: 2 ~ 4m
Detection angle: 360 °
Detection distance: 1.5 ~ 5.0m
Detection sensitivity: 0 ~ 100%
Illumination sensor: 0 ~ 32000 Lux
Product size: φ43mm * 35mm
Opening size: φ35mm
Power supply: KNX 30V(＜10mA)
Installation height: 2 ~ 12m
Detection angle: 360 ° Detection range: when the installation height is 8.0m
Detection diameter ≤ 15.0 m
Detection sensitivity: 0 ~ 100%
Illumination sensor: 0 ~ 32000 Lux Product size: φ43mm * 35mm
Opening size: φ35mm
Power supply: KNX 30V(＜10mA)
Installation height: 2 ~ 4m
Detection angle: 11 °
Detection distance: 0.1 ~ 3.2m (adjustable)
Illumination sensor: 0 ~ 32000 Lux Product size: φ43mm * 35mm
Opening size: φ35mm
Power supply: KNX 30V(＜10mA)
Detection Angle: 360°
Detection Distance: When installed at a height of 2.5M, the diameter for motion detection is ≤φ
5.0M.
Illuminance Sensor: 0~32000 Lux
Product Dimensions: 43mm x 25mm
Cut-out Size: 35mm x 25mm
Power Input: KNX-BUS
Installation Height: 2~3.2 M
Detection Angle: 360° Detection Range: When installed at a height of 2.7M
Diameter of micro/motion detection ≤3.0 M*4.0 M
Detection Sensitivity: 0~100%
Illuminance Sensor: 0~32000 Lux Product Dimensions: 43mm x 25mm
Cut-out Size: 35mm x 25mm
Power Input: KNX-BUS with auxiliary power supply (12-24VDC)
- The KNX RS485 Motor Controller enables the controlling of up to 18 motors.
- The motors can be controlled either individually or by groups.
- RS485 motors can be connected via bridging adapter.
- Different motor types can be used.
- Powered from KNX bus only (low voltage)
- Security/Alarm/Access Control/Sound/DALI Low-voltage Cable Shielded Plenum
- PVC
- Bare Copper Conductor
- UL Listed Type CMP, CL3P
Module with a serial interface to communicate with components in a DALI-line via RS232
- Easy connection of a PC or a PLC to a DALI system
- Bidirectional data traffic
- Addressing, configuration, status queries and monitoring
- Support for various proprietary DALI protocol extensions
- Galvanic isolation
- Supply via mains voltage
- Integrated bus supply
- Double DALI terminals for remote ceiling version (Art.Nr: 24166096-PS-DE and 24166096-LU-PS-DE)
- DALI-2 version with NEW protocol: LUBA (Lunatone Universal Building Module with serial interface to communicate with the DALI bus via RS232.
Allorado is the next-generation LoRa gateway that allows users to easily complement their existing building installations with data from LoRa sensors by carefully decoding bits and bytes sent from the LoRa network to telegrams that other installations - KNX, BACnet, Modbus and more - can understand.
| Base License | Allorado Enterprise | Allorado Pro |
|---|---|---|
| # devices | 250 | 50 |
| # protocols | 1 | 1 |
| # forwarder licenses | 0 | 0 |
Add-ons:
- Hardware Specifications (AP-1004HA)
- CPU: Intel Celeron
- Memory: 1 x SODIMM slot, supports DDR3L 1066/1333/1600MHz
- Storage: Supports 1 x internal SATA 2.5" HDD and 1 x mSATA slot
- Design: Fanless, low-power design
- Interfaces:
- 1 x VGA 1 x HDMI 2 x USB 2.0 2 x USB 3.0 2 x COM (RS232) 2 x LAN 1 x AUDIO
- Expansion: Supports 1 x MINI-PCIe slot
- Home Assistant pre installed
The dimmer with LED constant voltage drive can drive LED directly, has four channels, each channel is independent.
The output can connect with some big power dimmable LED lights. These LEDs can be switched, dimmed, recall scene or other operations via the bus.
The devices adopt PUSH terminals to achieve electrical connection; the connection to the EIB/KNX bus is established via a bus connecting terminal. The input need connect a 12V-36V DC operation voltage.
The Device is a DIN rail mountable and enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
