Products
Designed for bidirectional Data exchange between Modbus RTU- and KNX-products.
KNX Modbus Gateway with 250 data points.
Application area
The KNX Modbus RTU Gateway 886 is a compact Gateway between KNX TP and Modbus RTU with 250
freely configurable channels.
The device enables easy integration of Modbus devices that support the RTU protocol via RS-485 and can act as a Modbus master or slave.
As Master the device can address up to 25 slave devices.
The assignment between KNX objects and Modbus registers can be configured via parameters in the ETS
without an additional tool.
The gateway provides a galvanic isolation between KNX bus and Modbus.
Two buttons and three LEDs allow local operation and visualization of the device status.
With KNX IP interface, bus powered.
Application area
The KNX Modbus TCP Gateway 716 secure is a compact gateway between KNX TP and modbus TCP with 250 freely configurable datapoints.
The device enables easy integration of modbus devices that support the TCP protocol via IP and can act as a modbus master or slave.
As master the device can address up to 5 slave devices.
The assignment between KNX objects and modbus registers can be configured via parameters in the ETS
without an additional tool.
Two buttons and three LEDs allow local operation and visualization of the device status.
Furthermore, the device can be used as a programming interface to connect one or more PCs to the KNX bus (e.g. for ETS®).
Power is supplied via the KNX bus.
The device supports KNX Security.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
Motion Detector with 2 sensors and temperature sensor.
For wall mounting at 2.2 m.
Suitable for 55 mm switch ranges.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
The version with temperature sensor and two sensor buttons (SCN-BWM55T.x2) is an all-rounder if you have many corridors and rooms.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
The version with temperature sensor and two sensor buttons (SCN-BWM55T.x2) is an all-rounder if you have many corridors and rooms.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
The version with temperature sensor and two sensor buttons (SCN-BWM55T.x2) is an all-rounder if you have many corridors and rooms.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
The MDT Motion Detector / Automatic Switch with light sensor detects the smallest movements using 2 pyro detectors and a high-resolution lens.
Two separate lighting channels, one HVAC channel and one channel for room monitoring can be configured.
The room brightness is measured by the integrated light sensor and made available as an object.
KNX TP Multi IO with 48 configurable In- and Outputs.
Application area
The KNX TP Multi IO 570 is a universal binary interface for building control.
It provides 48 I/O lines.
Each line can be used as binary input as well as binary output.
The peripherals can be fed by an external voltage of 24 V⎓.
Channels which are configured as inputs can be used to control lights or blinds via the KNX network.
They also can be used to count impulses, e.g. as interface for energy meters.
Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.590) or jalousie relays (592).
The integrated USB interface allows establishing a bidirectional connection between a PC and the KNX bus.
The USB connector has a galvanic separation from the KNX bus.
Both ETS (Version 4.2 or later) and visualization tools support this interface.
The configuration of the device is done with ETS, a local download is possible.
An easy to read OLED display on the front panel enables a manual operation to test the installation.
KNX IP Multi IO with 48 configurable In- and Outputs.
Application area
The KNX IP Multi IO 580 is a universal binary interface for building control.
It provides 48 I/O lines.
Each line can be used as binary input as well as binary output.
The peripherals can be fed by an external voltage of 24 V⎓.
Channels which are configured as inputs can be used to control lights or blinds via the KNX network.
They also can be used to count impulses, e.g. as interface for energy meters.
Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.
590) or jalousie relays (592).
The device works using the medium KNX IP.
It can be configured using the ETS (Version 4.2 or higher) with native parameters and standard group objects.
Also the KNX addressing scheme, based on individual device
address and group objects, is unchanged.
An easy to read OLED display on the front panel enables a manual operation to test the installation.
The MDT Object Controller 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
The comfort range of the room climate is defined using Min / Max values when parameterising the object controller.
Switch actuators / heating actuators can be controlled by the object controller along with thermal actuators or motorised KNX actuators.
The MDT Object Controller 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
The comfort range of the room climate is defined using Min / Max values when parameterising the object controller.
Switch actuators / heating actuators can be controlled by the object controller along with thermal actuators or motorised KNX actuators.
For visualization of current building states and interactive control of building functions via Android or iOS App.
Visu Control for KNX app available free of charge in the Android and iOS store.
App suitable for smartphone and tablet with automatic setting of the respective view.
