Products

The MDT CO2/VOC Combi Sensor 55 has two sensors for measuring the CO2 and mixed gas concentration (VOC).

Aside from the measuring channels for CO2 and VOC, the Combi Sensor also records the room temperature and relative humidity.

It uses these measured values to carry out temperature and air quality controls.

The air quality traffic light gives early warning of excessive CO2 or VOC concentrations in the room.

The MDT CO2/VOC Combi Sensor 55 has two sensors for measuring the CO2 and mixed gas concentration (VOC).

Aside from the measuring channels for CO2 and VOC, the Combi Sensor also records the room temperature and relative humidity.

It uses these measured values to carry out temperature and air quality controls.

The air quality traffic light gives early warning of excessive CO2 or VOC concentrations in the room.

The MDT CO2/VOC Combi Sensor 55 has two sensors for measuring the CO2 and mixed gas concentration (VOC).

Aside from the measuring channels for CO2 and VOC, the Combi Sensor also records the room temperature and relative humidity.

It uses these measured values to carry out temperature and air quality controls.

The air quality traffic light gives early warning of excessive CO2 or VOC concentrations in the room.

KNX Combi-Presence Detector with constant light control and Air-quality signal light function.

KNX Combi-Presence Detector with constant light control and Air-quality signal light function.

• IPS capacitive touch panel & mechanical button
• Aluminum frame and replaceable buttons (plastic/aluminum)
• Push Buttons adjustable for 1 or 2 button operation
• Built-in temperature sensor, RGB status LED indication
• Adjustable for button push length, NO or NC contact operation
• Short/long operation for KNX functions of lighting, scene control, shutter etc
• Fits in 1-gang US Standard wall box

Gateway between KNX DMX512.

Application area

The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 (protocol for lighting control) with up to 64 freely configurable channels.

In master mode, the device allows convenient control of DMX luminaires, for example with KNX push-buttons.

Up to 64 dimming channels or up to 8 RGB/RGBW channels are available. 

Several subsets of DMX512 addresses can be assigned to each channel.

The dimming channels enable dimming of one or more DMX devices via KNX.

In addition, 4 sequencers are available in the gateway to carry out more complex tasks.

In slave mode KNX actuators can be controlled by DMX.

For example, the room lighting, which is part of the KNX installation, can be controlled via a DMX lighting control panel.

Glass Room Temperature Controller with automatic setpoint reduction based solar radiation.

Glass Room Temperature Controller with automatic setpoint reduction based solar radiation.

The Central Operation Unit Smart combines a large number of functions in one device and serves as a central control unit for your smart home.

The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset. 

The Central Operation Unit Smart combines a large number of functions in one device and serves as a central control unit for your smart home.

The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset.

In addition, the outdoor lighting and the basic lighting are switched on in the house at sunset until midnight.

The MDT Glass LED Indicator allows to display universal logical and building functions.

Three states can be displayed (red, green, blue).

For example, it is ideal for displaying window and door states (green = closed, red = open).

The MDT Glass LED Indicator allows to display universal logical and building functions.

Three states can be displayed (red, green, blue).

For example, it is ideal for displaying window and door states (green = closed, red = open).

The MDT Glass Presence Detector is available in two versions.

3 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Glass Presence Detector is available in two versions.

3 pyro sensors and a high-resolution lens detect even the smallest movements.

Depending on its parameterization the MDT Glass Push-button II Lite releases KNX telegrams.

The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons).

The RGBW status LEDs can be controlled with internal or external objects.

The LED brightness is controllable via day / night or brightness object.

In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available.

The Glass Push-button II Lite has 4 integrated logic blocks and an slap function with additional switch channel.

Depending on its parameterization the MDT Glass Push-button II Lite releases KNX telegrams.

The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons).

The RGBW status LEDs can be controlled with internal or external objects.

The LED brightness is controllable via day / night or brightness object.

In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available.

Depending on its parameterization the MDT Glass Push-button II Lite releases KNX telegrams.

The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons).

The RGBW status LEDs can be controlled with internal or external objects.

The LED brightness is controllable via day / night or brightness object.

In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available.

Depending on its parameterization the MDT Glass Push-button II Lite releases KNX telegrams.

The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01:

4 single sensor buttons).

The RGBW status LEDs can be controlled with internal or external objects.
The LED brightness is controllable via day / night or brightness object.

In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available.

Depending on its parameterization the MDT Glass Push-button II Lite releases KNX telegrams.

The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). 

The RGBW status LEDs can be controlled with internal or external objects.

The LED brightness is controllable via day / night or brightness object.

In addition to switching, dimming, blinds, scenes or sending values, a lot more functions are available.