Binary/Analog Inputs
The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.
The comprehensive application provides the suitable parameters for various applications.
Versions for floating contacts, 24 V AC/DC and 230 V AC are available.
The MDT Binary Input BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.
The comprehensive application provides the suitable parameters for various applications.
Versions for floating contacts, 24 V AC/DC and 230 V AC are available.
The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).
Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.
The MDT Analog In / Output AIO is suitable for controlling devices with 0-10 V input (e.g. ventilation systems) and for recording 0-20 mA (4-20 mA) / 0-10 V measurement data (e.g. from fill-level or pressure sensors).
Each channel can be configured both as an input and as an output and is galvanically separated from the KNX bus.
Bi-stable coupling relay for KNX Multi IO.
Application area
The Multi IO Extension Switch 590 serves as a power-saving alternative to commercial standard coupling relays.
The coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.
The Multi IO Extension Switch 590 has an integrated fuse to protect high-quality equipment.
KNX TP Multi IO with 48 configurable In- and Outputs.
Application area
The KNX TP Multi IO 570 is a universal binary interface for building control.
It provides 48 I/O lines.
Each line can be used as binary input as well as binary output.
The peripherals can be fed by an external voltage of 24 V⎓.
Channels which are configured as inputs can be used to control lights or blinds via the KNX network.
They also can be used to count impulses, e.g. as interface for energy meters.
Channels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g.590) or jalousie relays (592).
The integrated USB interface allows establishing a bidirectional connection between a PC and the KNX bus.
The USB connector has a galvanic separation from the KNX bus.
Both ETS (Version 4.2 or later) and visualization tools support this interface.
The configuration of the device is done with ETS, a local download is possible.
An easy to read OLED display on the front panel enables a manual operation to test the installation.
Universal dimming actuator and binary inputs with 1 230V dimming output for lights and 2 binary inputs.
Application area
The KNX IO 530 (1D2I) is a compact 230 V dimmer with 1 dimming output and 2 binary inputs.
The dimming actuator can be used for dimmable electric lights supplied with 230 V mains.
To cover a wide range of usable electric lights the KNX IO 530 can operate with trailing or leading edge dimming.
Besides controlling the light by switching, rel.
Dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function, staircase light and sequencer.
- 4 fold inputs. Can be individually configured per input
- 4 fold LED. Can be individually configured per LED
- LED output current: max. 2.5mA, limited via series resistor of 2K Ohm
- Input/Output wires: 2*5-pin wires, approx. 30cm. long. Can be extended up to 10 meters maximum
- Size: 1.81 x 1.81 x 0.46 inches. Fits in a 1-gang US wall box
The Device is a DIN rail mountable and enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
The Device is a DIN rail mountable 2-channel smart switch with power measurement.
It controls the on/off function for two independent electrical devices with a load up to 16 A per channel (25 A in total).
It is compatible with switches (default) and push-buttons.
The Device enables remote control of motorized blinds, roller shutters, venetian blinds, awnings, etc.
It measures power consumption of the connected device.
It is recommended to use only motors with electronic or mechanical limit switches.
The motor limit switches must be set correctly before connecting the Device to the motor.
The Wave 2PM (Device) is a single product that enables remote control of two electrical devices such as bulbs, ceiling fans, and IR heaters.
It switches (on/off) two independent loads and measures their power consumption separately and in total.
The Device is compatible with switches (default) and push-buttons.
The Device is a single product that enables the control of the on/off function for one electrical appliance such as bulb, ceiling fan, IR heater (with load up to 15 A).
It measures power consumption of the connected device.
The Device is compatible with switches (default) and push-buttons.
Shelly Plus i4 is a smart Wi-Fi switch input that allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios.
You can use Shelly Plus i4 to control other connected Shelly switches, sensors, or HTTP and MQTT-controlled devices.
Small enough to fit behind every wall switch, Shelly Plus i4 can show the status and control the action of four inputs.
You can access and monitor Shelly Plus i4 remotely from any place where you have internet connectivity, if the Device is connected to a Wi-Fi router and the Internet.
You can retrofit the Device into standard electrical wall boxes, behind power sockets, light switches, or into other places with limited space.
Shelly Plus i4 has an embedded Web Interface that you can use to control it and set it up.
Shelly Plus 1PM is a small form factor smart switch with power measurement, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system.
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1PM can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1PM has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Shelly Plus 1 is a small form factor smart switch with potential-free contacts, which allows remote control of electric appliances through a mobile phone, tablet, PC, or home automation system.
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly Plus 1 can be accessed, controlled and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space.
Shelly Plus 1 has embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
The Device controls on/off function for one electrical appliance, e.g., bulb, ceiling fan, IR heater, electrical locks, garage doors, irrigation system, etc.
The output contact is potential-free (dry contact), so different power supply loads (up to 16 A) can be connected to the Device.
It is compatible with push-buttons and switches (default).
The MDT Universal Interface BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.
The comprehensive application provides the suitable parameters for a wide range of applications.
Versions for floating contacts and 230 V AC are available.
The MDT Universal Interface BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.
The comprehensive application provides the suitable parameters for a wide range of applications.
Versions for floating contacts and 230 V AC are available.
The MDT Universal Interface BE, for example, makes conventional push-buttons, switches, window and auxiliary contacts “smart” for KNX.
The comprehensive application provides the suitable parameters for a wide range of applications.
Versions for floating contacts and 230 V AC are available.
