Your one stop shop for KNX devices in the USA 🇺🇸

(+1) 786 956 6821
support@knxsupply.com
Store Location
Sign in or Register

No result found for your search.

FREE SHIPPING ON ORDERS
(within US and <50lbs)$500+

Home
Catalog New
Articles
Support
Contact Us

function handleButtonClick() { setTimeout(() =>{ console.log('sa') BSS_B2B.observer.cartSubject.notifyObserver('CartUpdate', 'CartMutate'); }, 1000); }

No result found for your search.

System Devices
KNX Actuators
DALI Drivers
Occupancy Sensors
All Catalogue

Home
All Collections
Products

Products

Filter

Sort by

Showing 461 - 480 of 526 items

N 148/23 - IP Interface Secure

62%

N 148/23 - IP Interface Secure

Secure KNX/IP Gateway: Enables communication between KNX systems and IP networks with KNX IP Secure encryption.
Power Over Ethernet (PoE): Can be powered via PoE or an external 24V AC/DC supply.
Remote Access: Provides secure remote access to KNX systems through VPN connections.
Multiple Connections: Supports up to five simultaneous KNXnet/IP tunneling connections.
LED Indicators: Features LEDs for KNX, IP communication, and power status.
Easy Configuration: Configured through ETS software, supporting secure commissioning.
Compact Design: Designed for DIN rail mounting, ideal for distribution boards.
Flexible Power Options: Operates via PoE or separate power supply, ensuring flexibility in installation.

$342.27

~~$900.72~~

Wishlist

N 513/11 - Switch actuator, main module, 3 x AC 230/400 V, 20 AX, C load, Load-check

62%

N 513/11 - Switch actuator, main module, 3 x AC 230/400 V, 20 AX, C load, Load-check

Direct Mode Pushbutton: The button with an integrated yellow LED toggles between bus mode and direct mode.
Brief Press Functionality: Pressing the button briefly activates the green LED for 30 seconds, indicating the last selected module (A to E) and the switching state of the outputs (red LEDs on buttons 1 to 3).
Switching State Indication: The red LEDs in buttons 1 to 3 show the relay contact status: LED ON = contact closed, LED OFF = contact open.
Activating Direct Mode: Holding the button for at least 3 seconds turns on the yellow LED, indicating that direct mode is now active.
Output Control in Direct Mode: In direct mode, each output of the currently selected module can be switched on or off via a pushbutton on the top of the main module, using a toggle function.
Pushbutton Behavior: Pressing the pushbutton once turns the output on if it's off, and pressing it again turns it off. The red LED on the pushbutton shows the current state.
Unused Buttons: Pushbuttons 4 to 6 and their LEDs are not utilized in the N 513/11 model.
Module Selection: To change the output state of a different module, the desired module must be selected by pressing the direct mode pushbutton multiple times.

$431.34

~~$1,135.12~~

Wishlist

N 513/21 - Switch actuator submodule, 3 x AC 230/400 V, 20 AX, C load, load-check

62%

N 513/21 - Switch actuator submodule, 3 x AC 230/400 V, 20 AX, C load, load-check

Device Type: The switching actuator sub-module N 513/21 is a DIN-rail mounted device in N-system dimensions.
Relay Outputs: It can switch three groups of electrical consumers independently via its three relay contact outputs.
Load Monitoring: Each relay output features load current measurement and monitoring (load-check).
Standalone Operation: The sub-module cannot operate independently and must be connected to a main module.
Connection Method: It connects via a 6-pole bridging connector to a main module (N 513/11, N 512/11, or N 562/11) or to another sub-module already connected to a main module.
Power Supply: The sub-module’s electronics are powered by bus voltage through the 6-pole bridging connector.
Modular Extension: Up to 4 sub-modules can be connected in series to a main module, extending it from 3-fold to 15-fold switching capability.

$215.03

~~$565.85~~

Wishlist

N 523/04 Blind/Shade/Motor Controller 4×6A@120VAC

69%

N 523/04 Blind/Shade/Motor Controller 4×6A@120VAC

The sunblind actuator N 523/04 only works together with the application program 25 A4 Venetian blind actuator 981201.
The Engineering Tool Software (ETS) up from ETS2 V1.3 is required for the parameterisation and for loading the application program.
This is structured so that there is sufficient basic functionality available in the supplied state for simple applications in combination with 11 basic communication ob-jects: the always available object "Status Direct mode", an alarm object that influences all channels, an object "Blockade" that also influences all channels and the two 1-bit command objects per channel enabling a blind to be moved into the upper or lower final position, to stop the drive and to open or close the slats stepwise.
When commissioning the sunblind actuator the following objects can be added per channel, if needed, via the parameter tab "Functions, Objects":

$583.76

~~$1,898.59~~

Wishlist

N152 IP Control Center

Manages up to 1,250 KNX statuses and values, with easy access via standard web browsers on PCs, tablets, and smartphones.
Flexible Visualization: Offers graphical and mobile-friendly editors for customizable control and display elements, adaptable to various styles and devices.
Advanced Automation: Includes timer, scene, and alarm modules, supporting up to 5,000 events and 250 alarms, ensuring robust automation and monitoring.
IP Integration: Controls up to 20 IP devices and integrates seamlessly with SONOS speakers and Philips HUE lighting systems.
Efficient Connectivity: Features a 10/100 Mbps Ethernet interface for reliable IP network connections, powered by an external 24V AC/DC source.
KNX Network Control: Monitors and controls up to 1,250 KNX statuses and values.
User-Friendly Access: Operates through standard web browsers on PCs, tablets, and smartphones.
Graphical Customization: Includes web and smart editors for creating customizable visualizations.

$3,099.19

~~$8,155.76~~

Wishlist

NETIO T1 sensor, External Sensors

External Temperature sensor (-20°C to +80°C) on 3m cable for NETIO devices with DI (Digital Input).

$115.00

Wishlist

OCI702 USB-KNX Interface W/ Power Supply

62%

OCI702 USB-KNX Interface W/ Power Supply

The USB-KNX interface OCI702 serves to provide a USB-KNX connection to access tools from a Microsoft Windows PC to a KNX network or individual device. It consists of the OCI702 service interface as well as several connection cables and accessories including cable ties and a service bag.

$361.09

~~$950.25~~