Products

Compact USB Interface between PC and KNX bus.

Installation Instructions

• The device shall be used in indoor areas only.
•  It can be connected directly to a USB port of a PC or laptop.
• The KNX connector is marked at the enclosure with +/- for bus polarity.

The USB Interface enables the communication between the PC and the KNX / EIB system.

The USB interface is galvanically isolated from the KNX / EIB bus.

The MDT Weather station Home is made for the weather detection for private use.

The installation is made in the outdoor area and should be made on a pole.

Alternative, the weather station can be installed on a wall at the southern side.

The connection to the bus is made via a 5 m long bus cable, which is included in the delivery contents.

• The KNX/DALI Gateway communicates with up to 64
• DALI actuators per channel. These can be connected and dimmed in up to 16 groups per channel.
• The gateway also supports selected sensors with DALI interface.
• It also records and transfers DALI status and error messages.
• An individual name, a group, parameter and scenes are assigned to individual DALI ECG´s during commissioning with the ETS (Engineering Tool Software).
• DALI sensors and their functionality are also assigned in the ETS.
• All DALI subscribers and functions are independent and can be linked via group addresses.
• The device can only be operated in DALI segments with connected ECGs and sensors and not with further DALI controllers within the segment (no multi-master mode).
• The power needed for ECGs and sensors is supplied directly through the gateway. An additional DALI power supply is not required, neither is it permitted.

Adds a touch of sophistication to any space with a sleek, screwless face and low-profile.

Sized to fit even over ragged openings for a seamless look.

Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.

Ensures proper plate positioning with subplate screws.

Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.

The Siemens Industry Gamma Lighting Control Enclosures support Gamma Lighting system components and other panel-mounted devices that snap into DIN rails.

Specially designed to accommodate the different DIN rail-based KNX modules, regardless of the manufacturer.

The following table provides ordering information:

Enclosure Type: UL and cUL Certified NEMA Type 1 Industrial Control Enclosure

MDT Frame 1 gang for assortment 55, IT/US, Black matt.

Design frame 1 gang, incl.

Installation frame type E international, for the assortment 55.

MDT Frame 1 gang for assortment 55, IT/US, White glossy finish.

Design frame 1 gang, incl.

Installation frame type E international, for the assortment 55. 

Glass cover frame assortment 55.

MDT Glass frame 1 gang, for 55 mm systems, White.

Frames for assortment 55.

Dimensions (H x W): 92 x 92 mm.

Suitable for 55 mm switch ranges e.g.

Glass cover frame assortment 55.

MDT Glass frame 2 gang, for 55 mm systems, White.

Frames for assortment 55.

Dimensions (H x B): 163 x 92 mm.

Glass cover frame assortment 55.

MDT Glass frame 3 gang, for 55 mm systems, White.

Frames for assortment 55.

Dimensions (H x W): 234 x 92 mm.

KNX Combi-Presence Detector with constant light control and Air-quality signal light function.

KNX Combi-Presence Detector with constant light control and Air-quality signal light function.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.

The MDT Presence Detector is available in several versions.

Up to 4 pyro sensors and a high-resolution lens detect even the smallest movements.