Products
The Rain Sensor SCN‐RS1R1.01 is used for the detection of rain and send messages if rain was detected. For faster drying after rain and at low temperatures, a heating is integrated below the sensor area.
This enables also the detection of two contiguous rain periods.
Compact USB interface between PC and KNX RF.
Application area
This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
The device complies with the specification of KNX RF and supports the protocol cEMI.
The interface is compatible with ETS 5 (or higher).
For software integration (Windows or Linux) of this interface the free SDK kDrive express is available.
The power is supplied via the USB port.
The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.
It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.
The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT room temperature controller 55 is used to detect and control the temperature of indoor rooms.
It is used, for example, in combination with an MDT universal actuator AKU or heating actuators without an integrated controller.
The MDT room temperature sensor 55 records the temperature and makes it available to other devices such as the MDT heating actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller 55 is used for detecting the temperature of indoor rooms and controlling this.
It is used, for example, in combination with an MDT Universal Actuator AKU or heating actuators without an integrated controller.
The MDT Room Temperature Sensor 55 records the temperature and makes it available to other units such as the MDT Heating Actuator AKH.
The temperature measuring range is between -10 and 50 °C.
The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.
The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.
The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.
The MDT Room Temperature Controller Smart 55 with integrated temperature and humidity sensor is used for controlling the temperature of indoor rooms.
Switch actuators / heating actuators can be controlled by the room temperature controller along with thermal actuators or motorised KNX actuators.
In addition, the MDT Room Temperature Controller Smart has 4 binary inputs for connecting floating contacts.
The MDT Room Temperature / Humidity Sensor 55 detects temperature and humidity in indoor rooms; the dew point is calculated automatically.
Min / max limit values can be set for the sensors during the parameterisation of the device and corresponding actions can be defined in case of deviation.
The comfort range of the room climate is defined using Min / Max values when parameterising the room temperature / humidity sensor.
The MDT Room Temperature / Humidity Sensor 55 detects temperature and humidity in indoor rooms; the dew point is calculated automatically.
Min / max limit values can be set for the sensors during the parameterisation of the device and corresponding actions can be defined in case of deviation.
The comfort range of the room climate is defined using Min / Max values when parameterising the room temperature / humidity sensor.
Color LCD Screen, 0.96", resolution 80*160, panel thickness:10.4mm,built-in temperature sensor, Proximity sensor, RGB color LED indicator.
Full KNX functions including switch, dimming, shutter,scene control, value sending, RGB,RGBW,Color Temp. control, shift register, Multiple operation, Delay mode. Max. 8 group event,8 logic functions.
Support display in text or icon or textticon.
Power: KNX Bus only; Consumption: bus 15mA
Installation:wall mounted, fits in 86*86mm, 80*80mm, German Round (® 60mm) wall boxes.
Color option: Black, White
The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line.
This significantly increases the safety of the protected line in the inner and in the outdoor area.
A manipulation of the device programming is no longer possible.
Serial Interface and ObjectServer for KNX Bus.
Application
The KNX Serial Interface BAOS 870 serves as a simple integration solution for non-KNX devices.
Designed as a RS-232 interface, the KNX Serial BAOS 870 uses the proven FT1.2 protocol (PEI 10) as message format.
Moreover, the device supports the BAOS protocol for accessing data points.
This allows non-KNX devices to be fully integrated into a KNX network via a RS-232 link.
For a quick start, free SDKs, a demonstration tool as well as an ETS entry with 250 group objects are available.
Furthermore, individual ETS representations for OEM versions can be created.
