Newest Products

Binary input with 4 channels to control lights, shutter etc. Inputs suitable for dry contacts.

Application area

The KNX IO 411 (4Ii) is a compact binary input with 4 channels to control lights, shutter etc.

With conventional switches or contacts.

Inputs are designed for dry contacts.

Using as impulse counter is possible as well.

It can be used to connect energy meters with S0 output or anemometers.

Two push buttons and three LEDs allow a local operation and a visualization of the device state.

In addition to the input channels the device includes 16 independent functions for logic or timer control.

Binary input with 4 channels to control lights, shutter etc.

Installation Instructions

• The device may be used for permanent interior installations in dry locations or within distribution boards with DIN rail.

640 mA Power supply with integrated USB interface, KNX node, and diagnosis functions.

Application area

The KNX PowerSupply USB 367 is a 640 mA power supply with an integrated USB interface and a small footprint of only 4 TE (72 mm).

The device has a bus choke and additionally provides an output for auxiliary power.

The USB interface allows establishing a bidirectional connection between a PC and the KNX bus.

The USB connector has a galvanic separation from the KNX bus.

Both ETS (Version 4.2 or later) and visualization tools support this interface.

The KNX node monitors output current, bus voltage and the temperature in the enclosure.

The configuration of the device is done with ETS.

An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.

640 mA Power supply with integrated KNX node, diagnosis and logical functions.

Application area

The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm).

The device has a bus choke and additionally provides an output for auxiliary power.

The integrated KNX node monitors output current, bus voltage and the temperature in the enclosure. Various logic functions are available for application purpose.

The configuration is done with the ETS (version 4.2 or higher).

An easy to read OLED display on the front panel enables the user to display the operating parameters locally on the device.

640 mA Power supply.

Installation Instructions

• The device may be used for permanent interior installations in dry locations, within distribution boards or small casings with DIN rail.

Compact USB interface between PC and KNX RF.

Application area

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network. 

The device complies with the specification of KNX RF and supports the protocol cEMI.

The interface is compatible with ETS 5 (or higher).

For software integration (Windows or Linux) of this interface the free SDK kDrive express is available.

The power is supplied via the USB port.

Compact USB Interface between PC and KNX bus.

Installation Instructions

• The device shall be used in indoor areas only.
•  It can be connected directly to a USB port of a PC or laptop.
• The KNX connector is marked at the enclosure with +/- for bus polarity.

Compact USB Interface between PC and KNX bus.

Application area

The KNX USB Interface 312 is a data interface between a PC or laptop and the KNX installation bus.

It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.

Long telegrams enable a faster download to devices that can receive these telegrams.

The LEDs on the device indicate the operating status and communication errors on the bus.

The USB connector is galvanic isolated from the KNX bus.

Both KNX SERVER and KNX SUPERIO will show the functions of your system in a stylish and intuitive way: through the OPTIMA interface.

Thanks to the integrated web support, the interface can be shown on all kind of devices with a compatible browser and will automatically adapt its contents to the different conditions (resolution, size …).

The use of the interface has been optimized for devices with touchscreen and – in addition to controling of the KNX system – offers a huge amount of additional functionalities.

Get an idea of how your visualization with DIVUS OPTIMA might look like.

Simply click on the following link to be redirected to our demo server:

URL: https://optima.divus.eu
username: user
password: user

KNX Secure: effective data protection!

Digital data transmission and networking greatly simplify our daily lives, but make us more susceptible to tampering or attacks on smart home installations.

This is because anything that can be controlled digitally could theoretically also be controlled by unauthorised third parties.

This is where KNX Data Secure comes in!

Thanks to encryption and authentication, KNX Data Secure effectively protects data transmission from unauthorised access and manipulation, giving your smart home the highest security standards on the market.

KNX Data Secure is a guarantee of security and privacy, which is why DIVUS has chosen it for its products, such as the new DIVUS KNX IQ08 TPS touch panel!

• DALI LED-Dimmer for RGBW color control
• Suitable for constant current LEDmodules
• Operating Mode DT8: one DALIaddress for the independent control of level and color (DALI DT8, Type RGBWAF)
• Operating Mode Color&Dim
• SwitchDim2
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz).
• Types with common plus and minus connector for constant currents up to 700mA.
• Independent electrical device, suitable for integration in luminaires (protection class II) or remote ceiling.
• Supply voltage 12V to 48V DC.
• Output voltage up to 45VDC.
• High efficiency.
• Configuration via PC-software DALICockpit and DALI interface (e.g. DALI USB).

Overview

• DALI LED-Dimmer for RGB colour control suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: one DALIaddress for the independent control of light level and colour (DALI DT8, Type RGBWAF)
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• supply voltage 12V to 48V DC (according to the operating voltage of the led modules)
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels.

Overview

• Device with 2 DALI Tunable White LED-Dimmer
• For constant voltage LED modules (12V-48V)
• 2 DALI addresses (Device Type 8, Colour Type Tc)
• Independent control of light level and color temperature
• Dimming range: 1%-100%, PWM frequency: 488Hz DIN rail mounting compatible.
• Supply voltage: 12V-48V DC, Input current: 0.1A-16A
• Low standby losses, High efficiency >98%
• Configuration via DALI-Cockpit software and DALI USB interface

Overview

• DALI LED-Dimmer for the control of tunable white luminaires
• Suitable for constant voltage LEDmodules with operating voltages from 12V to 48V
• Operating Mode DT8: One DALIaddress for the independent control of light level and colour temperature (DALI DT8, Colour Type Tc)
• Operating Mode Balance&Dim: Control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the channel balance (e.g. colour temperature)
• Operating Mode Dim2Warm: one DALI-address for simultaneous adjustment of light level and colour temperature
• SwitchDim2: 2 switch-inputs offer control of level and colour without DALI
• Dimming range 0.1%-100%
• Type dependent max. input currents of 4A, 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels
• Low standby power consumption
• High efficiency
• Configuration via PC-software DALICockpit and DALI USB-interface
• User-friendly factory default settings

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Types with common minus connector (GM) with constant currents up to 700mA
• Independent control gear, suitable for integration in luminaires (protection class II) and remote ceiling
• Supply voltage 12V to 48V DC
• Output voltage up to 45VDC
• Short circuit protection
• Low standby power consumption
• High efficiency

Overview

• 4 channel DALI LED-Dimmer
• Suitable for constant current LEDmodules
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI.
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/244Hz/488Hz/976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz)
• Types with common plus connector with constant currents up to 500mA 

Overview

• 4-channel DALI LED Dimmer for constant current LED modules.
• Operating Modes:
• DT6: 4 DALI addresses for channel control.
• Colour&Dim: 2 DALI addresses for light and color.
• SwitchDim2: Control without DALI using 2 switch inputs.
• Dimming: 0.1% to 100% range.
• PWM Frequency: 122Hz to 1kHz options.
• Connectors: Common plus (up to 500mA) and minus (GM) (up to 700mA).
• Power: 12V-48V DC input, up to 45VDC output.
• Features: Short circuit protection, low standby power, high efficiency.
• Configuration: DALICockpit software and DALI interface.
• User-friendly default settings.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It offers two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for adjusting light levels and one for color.
• In SwitchDim2 mode, it provides light and color control through 2 switch inputs without DALI. 
• It comes in versions with either a common plus connector supporting up to 500mA or a common minus connector (GM) supporting up to 700mA.
• It is an independent control gear suitable for integration into luminaires (Class II) and remote ceiling applications.
• The supply voltage ranges from 12V to 48V DC, with an output voltage up to 45V DC.
• The dimmer includes short circuit protection, low standby power consumption, and high efficiency. Configuration is done via DALICockpit PC software and a DALI interface (e.g., DALI USB).

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
•  It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
•  Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.
• This flexibility makes it a versatile choice for various lighting applications, ensuring effective control and integration in different setups.

Overview

• The 4-channel DALI LED Dimmer is designed for constant current LED modules.
• It supports two operating modes: DT6 for individual channel control using 4 DALI addresses, and Colour&Dim, which uses 2 DALI addresses—one for light level adjustment and one for color adjustment.
• Additionally, SwitchDim2 mode allows control of light level and color with 2 switch inputs, bypassing DALI.
• The dimmer offers a dimming range from 0.1% to 100% and comes in versions with a common plus connector for currents up to 500mA or a common minus connector (GM) for currents up to 700mA.
• It is an independent control gear suitable for integrating into luminaires (Class II) and for remote ceiling installations.
• The device operates with a supply voltage of 12V to 48V DC and provides an output voltage of up to 45V DC.