{"product_id":"eelectron-pd00f01knx-knx-outdoor-pir-motion-detector-ip54-parking-areas-white","title":"Eelectron PD00F01KNX KNX Outdoor PIR Motion Detector IP54, Parking Areas – White","description":"\u003cp\u003eThe Eelectron PD00F01KNX is a KNX outdoor PIR motion detector in white, rated IP55 for wall mounting and IP54 for ceiling mounting, developed for parking areas, garage entrances, driveways, loading yards, covered walkways and building perimeters. It brings motion-based control of lighting, HVAC and alarm functions natively onto the KNX TP bus, with no gateway or separate relay stage, so parking lighting can be switched or dimmed by movement and ambient light from the same ETS project as the rest of the building.\u003c\/p\u003e\u003cp\u003eThe lens covers 360° up to 32 m (105 ft) across — a 16 m (52 ft) radius at a 2.5 m (8.2 ft) mounting height — with sensitivity adjustable in four levels in ETS. Five output channels are provided: two for lighting, two for HVAC and one dedicated to alarm, with a configurable number of movements required to trigger the alarm. An integrated light sensor (10–2000 lux) enables illuminance-dependent logic, constant light control, a 2-level Standby Light mode and intelligent delays against rapid brightness changes. Auto\/semi-auto modes, Test mode, Master\/Slave operation, timings and thresholds are all set in ETS. Installation uses an anti-drop base, removable terminals and wall, ceiling, corner or European junction-box mounting; three lens shields are supplied to mask the detection area.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOutdoor PIR motion detector for KNX TP; IP55 wall-mounted, IP54 ceiling-mounted\u003c\/li\u003e\n\u003cli\u003e360° lens, coverage up to 32 m (105 ft) diameter — 16 m (52 ft) radius at 2.5 m (8.2 ft) height\u003c\/li\u003e\n\u003cli\u003ePIR sensitivity adjustable in 4 levels via ETS; three lens shields supplied to trim the detection area\u003c\/li\u003e\n\u003cli\u003e5 output channels: 2 lighting, 2 HVAC, 1 alarm (configurable number of movements to trigger)\u003c\/li\u003e\n\u003cli\u003eAmbient light measurement 10–2000 lux: illuminance thresholds, constant light control, 2-level Standby Light mode, intelligent delays\u003c\/li\u003e\n\u003cli\u003eAuto \/ semi-auto modes, Test mode, Master\/Slave operation, timing parameters and thresholds configured in ETS\u003c\/li\u003e\n\u003cli\u003eBus-powered: 21–30 V DC, approx. 10 mA operating \/ 5 mA standby\u003c\/li\u003e\n\u003cli\u003eAnti-drop base, removable terminals; wall, ceiling, corner or European junction-box mounting\u003c\/li\u003e\n\u003cli\u003eWhite weather-resistant plastic housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–30 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003eapprox. 10 mA operating; 5 mA standby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus\u003c\/td\u003e\n\u003ctd\u003eKNX TP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003ePIR motion detection, 360° lens; ambient light sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003eup to 32 m (105 ft) diameter — 16 m (52 ft) radius at 2.5 m (8.2 ft) mounting height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e4 levels, adjustable in ETS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIlluminance measurement\u003c\/td\u003e\n\u003ctd\u003e10–2000 lux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput channels\u003c\/td\u003e\n\u003ctd\u003e5: 2 lighting, 2 HVAC, 1 alarm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating modes\u003c\/td\u003e\n\u003ctd\u003eAuto \/ semi-auto, Test, Master\/Slave; constant light control; Standby Light (2-level)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003eIP55 wall mounting; IP54 ceiling mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eWall, ceiling, corner or European junction box; anti-drop base; removable terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied accessories\u003c\/td\u003e\n\u003ctd\u003e3 lens shields\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eWhite plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eEelectron PD00F01KNX application (download from eelectron.com)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no.\u003c\/td\u003e\n\u003ctd\u003ePD00F01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eRelated Products\u003c\/h3\u003e\u003cp\u003eIndoor KNX presence detectors: PD00E01KNX \/ PD00E01KNX-3 (Standard, ceiling), PD00E09KNX \/ PD00E09KNX-3 (High Bay), PD54E09KNX \/ PD54E09KNX-3 (High Bay IP54), PD00E31KNX \/ PD00E31KNX-3 (wall-mount), PD00E20KNX (Wide Range), PD00E21KNX (Corridor).\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eAvailable to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50560374866176,"sku":"PD00F01KNX","price":215.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/PD00F01KNX.png?v=1791483827","url":"https:\/\/www.knxsupply.com\/products\/eelectron-pd00f01knx-knx-outdoor-pir-motion-detector-ip54-parking-areas-white","provider":"KNX Supply","version":"1.0","type":"link"}