{"product_id":"eelectron-pd00e01knx-3-knx-presence-detector-standard-black","title":"Eelectron PD00E01KNX-3 KNX presence detector standard – black","description":"\u003cp\u003eThe Eelectron PD00E01KNX-3 is the Standard version of the Multi.Sensor KNX ceiling range in black: PIR presence detection plus an integrated illuminance sensor for daylight-dependent and constant-light control. It is the workhorse detector for offices, classrooms, hotel rooms and corridors where lights should follow both occupancy and available daylight, and it replaces separate occupancy sensor, photocell and input module with one bus-powered device.\u003c\/p\u003e\n\u003cp\u003eFive independent presence channels can each be set for presence with or without light control, automatic or semi-automatic, or for constant-illuminance regulation independent of presence. A rear connector provides 3 dry-contact inputs, one of which can be switched to analog mode for an Eelectron NTC probe, turning the detector into a full 2-stage PI room thermostat. Twelve logic blocks, a Circadian Rhythm function for tunable-white luminaires and the Virtual Holder hotel-room logic are all included in the ETS application. The black finish is matched by the white version PD00E01KNX.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePIR presence detection with 5 independently configurable channels: presence with\/without light control, constant-illuminance control, automatic or semi-automatic activation\u003c\/li\u003e\n\u003cli\u003eIntegrated illuminance sensor for ambient lighting control; ETS correction parameters calibrate the ceiling reading to the work plane with a lux meter\u003c\/li\u003e\n\u003cli\u003eCircadian Rhythm logic: brightness and colour temperature follow predefined curves or the real sun position for a given geographic coordinate\u003c\/li\u003e\n\u003cli\u003e3 rear digital inputs for dry-contact pushbuttons or switches (on\/off, dimming, shutters\/blinds, scenes, sequences, step commands)\u003c\/li\u003e\n\u003cli\u003eOne input configurable as analog for Eelectron NTC probes TS01A01ACC \/ TS01B01ACC \/ TS01C01ACC \/ TS01D01ACC — sends temperature to the bus or runs a complete thermostat module\u003c\/li\u003e\n\u003cli\u003eIntegrated 2-stage thermostat with PI controller for heating\/cooling equipment, valves, 2- and 4-pipe fan coils\u003c\/li\u003e\n\u003cli\u003e12 logic blocks with logical, threshold, algebraic and conditional operators plus predefined proportional and dew-point algorithms\u003c\/li\u003e\n\u003cli\u003eVirtual Holder logic: door contact + presence sensors produce a reliable hotel-room occupancy state and detect unexpected presence\u003c\/li\u003e\n\u003cli\u003eCeiling mounting up to 4 m (13 ft); surface, recessed and Swiss-box mounting accessories available\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 5 mA; 250 group addresses \/ 250 associations\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–32 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eKNX bus connector; rear 6-pole cabled connector (AWG 24 wires, 100 mm \/ 4 in leads) for the inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs – digital mode\u003c\/td\u003e\n\u003ctd\u003e3 inputs for dry (potential-free) contacts; scanning voltage 3.3 V DC; max. cable length 30 m (98 ft), twisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput – analog mode\u003c\/td\u003e\n\u003ctd\u003e1 of the 3 inputs for NTC probe TS01A01ACC (−20…+100 °C), TS01B01ACC (−50…+60 °C), TS01C01ACC (−40…+105 °C) or TS01D01ACC (−5…+45 °C); max. cable 30 m (98 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003ePIR presence detection; illuminance sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePresence channels\u003c\/td\u003e\n\u003ctd\u003e5, independently configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermostat\u003c\/td\u003e\n\u003ctd\u003e2-stage with integrated PI controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting height\u003c\/td\u003e\n\u003ctd\u003eCeiling, up to 4 m (13 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e250 \/ 250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.11 kg (0.24 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eEelectron PD00E0x application (download from eelectron.com)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003ePD00E01KNX-3 \/ 8054144522388\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003ePD00E01KNX (same detector in white). Basic (presence only): PD00E00KNX \/ PD00E00KNX-3; Multi with temperature, humidity and sound: PD00E02KNX \/ PD00E02KNX-3; Space: PD00E03KNX \/ PD00E03KNX-3; High Bay: PD00E09KNX \/ PD00E09KNX-3; BLE beacon version: PD00E11KNX \/ PD00E11KNX-3. Accessories: PD00E00ACC (white) \/ PD00E00ACC-3 (black) surface-mounting enclosure; PD00E01ACC recessed box mounting frame; PD00E03ACC \/ PD00E03ACC-3 Swiss-box mounting frame; PD00E06ACC-10 10 m input cable; PD00E08ACC cable clamp. Probes: TS01A04ACC, TS01B04ACC, TS01C01ACC, TS01D01ACC-1 \/ -3. DALI-2 equivalent: PD00A01DL2-1 \/ -3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_PD00E0xKNXFI00010305_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559526600960,"sku":"PD00E01KNX-3","price":155.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/PD00E01KNX-3-7_d05a9874-94fb-47f0-b240-ca4c548e60c6.jpg?v=1791482643","url":"https:\/\/www.knxsupply.com\/products\/eelectron-pd00e01knx-3-knx-presence-detector-standard-black","provider":"KNX Supply","version":"1.0","type":"link"}