{"product_id":"eelectron-pd00a01dl2-1-dali-2-presence-detector-with-light-control-white","title":"Eelectron PD00A01DL2-1 DALI-2 Presence Detector with light control – white","description":"\u003cp\u003eThe Eelectron PD00A01DL2-1 is a DALI-2 certified presence detector with light control in white, the Standard version of Eelectron’s DALI-2 ceiling sensor range. It gives a DALI-2 lighting system (application controller plus DALI-2 drivers) native occupancy and illuminance input devices in one compact 81 mm (3.2 in) round housing, for offices, classrooms, hotel rooms and corridors where the lighting runs on DALI rather than KNX.\u003c\/p\u003e\n\u003cp\u003eThe device implements IEC 62386 parts 101 ed. 2 and 103 ed. 1 with input-device instances for presence (303), light (304) and pushbuttons (301): a rear 6-pole connector carries 3 digital inputs for pushbuttons, each reporting released, pressed, short press, double press, long-press start\/repeat\/stop, free and stuck states. Mounting height is up to 4 m (13 ft) and the same mounting accessories as the KNX range apply. The black finish is PD00A01DL2-3.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDALI-2 input device: IEC 62386-101 ed. 2, -103 ed. 1; instances 301 (pushbuttons), 303 (presence), 304 (light)\u003c\/li\u003e\n\u003cli\u003ePIR presence detection for mounting heights up to 4 m (13 ft); coverage approx. 10 m (33 ft) diameter at 2.5 m, 14 m (46 ft) at 4 m\u003c\/li\u003e\n\u003cli\u003eIntegrated illuminance sensor 50–20,000 lux for daylight-dependent control by the DALI-2 application controller\u003c\/li\u003e\n\u003cli\u003e3 rear digital inputs for pushbuttons with full event set: released, pressed, short, double, long-press start\/repeat\/stop, free, stuck\u003c\/li\u003e\n\u003cli\u003ePowered from the DALI bus (9.5–22.4 V DC, ≤ 10 mA) — no auxiliary supply; 250 ms start-up\u003c\/li\u003e\n\u003cli\u003eCompact PC-ABS housing ø 81 × 37 mm (3.2 × 1.5 in), IP20, approx. 120 g\u003c\/li\u003e\n\u003cli\u003eSurface, recessed and Swiss-box mounting via PD00E00ACC, PD00E01ACC, PD00E03ACC; PD00E08ACC cable clamp; PD00E06ACC-10 10 m input cable\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia DALI bus, 9.5–22.4 V DC (FELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 10 mA; start-up time 250 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDALI-2 compliance\u003c\/td\u003e\n\u003ctd\u003eIEC 62386-101 ed. 2, -103 ed. 1; input instances 301 (digital inputs), 303 (presence), 304 (light)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eDALI bus; rear 6-pole cabled connector, AWG 26, 100 mm (4 in) leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs – digital mode\u003c\/td\u003e\n\u003ctd\u003e3 inputs for dry contacts (pushbuttons); scanning voltage 3.3 V DC; max. cable length 10 m (33 ft), twisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensors\u003c\/td\u003e\n\u003ctd\u003ePIR presence; illuminance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIlluminance sensor\u003c\/td\u003e\n\u003ctd\u003e50–20,000 lux\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting height \/ coverage\u003c\/td\u003e\n\u003ctd\u003eUp to 4 m (13 ft); at 2.5 m approx. ø 3.8 \/ 7.0 \/ 10.0 m, at 4 m approx. ø 6 \/ 11 \/ 14 m (seated \/ walking across \/ radial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure \/ protection\u003c\/td\u003e\n\u003ctd\u003ePC-ABS; IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−5…+45 °C (23…113 °F); storage −20…+55 °C; max. 90 % RH non-condensing; indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (ø × H)\u003c\/td\u003e\n\u003ctd\u003e81 × 37 mm (3.2 × 1.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg (0.22 lb) (datasheet: approx. 120 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN IEC 63044-3; EN IEC 63044-5-1 \/ -5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU; DALI-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003ePD00A01DL2-1 \/ 8054144522616\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003ePD00A01DL2-3 (same detector in black). DALI-2 Multisensor with temperature, humidity and sound: PD00A02DL2-1 \/ PD00A02DL2-3. KNX equivalent: PD00E01KNX \/ PD00E01KNX-3. Accessories: PD00E00ACC \/ PD00E00ACC-3 surface enclosure, PD00E01ACC box mounting frame, PD00E03ACC \/ PD00E03ACC-3 Swiss-box frame, PD00E08ACC cable clamp, PD00E06ACC-10 10 m input cable.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_PD00A0xDL2FI00010203_datasheet_A3_2025_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559471026432,"sku":"PD00A01DL2-1","price":117.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Sensor_Basic_flat-12.jpg?v=1791480913","url":"https:\/\/www.knxsupply.com\/products\/eelectron-pd00a01dl2-1-dali-2-presence-detector-with-light-control-white","provider":"KNX Supply","version":"1.0","type":"link"}