{"product_id":"eelectron-lr00a01dal-dali-bus-repeater","title":"Eelectron LR00A01DAL DALI Bus Repeater","description":"\u003cp\u003eThe Eelectron LR00A01DAL is a DALI line repeater: it regenerates the DALI signal and supplies a fresh 15 V line so the physical bus can be extended from the standard 300 m to 600 m, or so a line can be split into two electrically separate segments. It solves the two problems large DALI installations run into: cable runs beyond the specification limit and voltage drop on long, heavily loaded lines.\u003c\/p\u003e\n\u003cp\u003eThe output side delivers 230 mA guaranteed (250 mA max) to the extended segment while drawing under 2 mA from the incoming line, and four LEDs report power, input, output and fault status. Only one repeater may be used per line (no cascading). It mounts in 3 DIN modules and is powered from 100–240 V AC; it works with any DALI or DALI-2 application controller, including the Eelectron IC01D01DAL, IC02D01DAL and IC01D03DAL gateways.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends a DALI line from 300 m (985 ft) to 600 m (1,970 ft) total, or isolates two segments\u003c\/li\u003e\n\u003cli\u003eOutput DALI supply 15 V, 230 mA guaranteed, 250 mA max\u003c\/li\u003e\n\u003cli\u003eInput load on the primary line \u0026lt; 2 mA\u003c\/li\u003e\n\u003cli\u003e4 status LEDs: power, DALI in, DALI out, fault\u003c\/li\u003e\n\u003cli\u003eNo cascading: one repeater per DALI line\u003c\/li\u003e\n\u003cli\u003eMains supply 100–240 V AC, about 5 W\u003c\/li\u003e\n\u003cli\u003eTransparent to DALI and DALI-2 controllers; no configuration required\u003c\/li\u003e\n\u003cli\u003e3-module DIN housing (54 mm), approx. 120 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, approx. 5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDALI input\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 mA consumption from the primary line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDALI output\u003c\/td\u003e\n\u003ctd\u003e15 V; 230 mA guaranteed, 250 mA max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine extension\u003c\/td\u003e\n\u003ctd\u003eUp to 600 m (1,970 ft) total; max one repeater per line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003e4 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail, 3 modules (3 TE, 54 mm \/ 2.13 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +70 °C (-4 °F to 158 °F) (recommended max. 55 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 61547:2009; EN 55015:2019; EN IEC 61000-3-2; EN 61347-1:2015+A1:2017; IEC 62386-101; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eNone (transparent DALI device)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.15 kg (0.33 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eLR00A01DAL \/ 8054144528175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eDALI gateways: IC01D01DAL, IC02D01DAL, IC01D03DAL, IC04B01DAL. DALI-2 pushbutton interfaces: PB40A01DL2 \/ PB44A01DL2.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_LR00A01DALFI00010100_datasheet-A4-3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559470993664,"sku":"LR00A01DAL","price":369.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/knxsupply-placeholder-v2.png?v=1791469099","url":"https:\/\/www.knxsupply.com\/products\/eelectron-lr00a01dal-dali-bus-repeater","provider":"KNX Supply","version":"1.0","type":"link"}