{"product_id":"eelectron-in00c01usb-knx-usb-interface-reg-usb-c","title":"Eelectron IN00C01USB KNX USB Interface REG, USB-C","description":"\u003cp\u003eThe Eelectron IN00C01USB is a KNX USB interface with a USB-C connector, used to connect a laptop running ETS to the KNX TP line for programming, diagnostics and bus monitoring. It supports long frames (APDU 233) as a System B device, so large ETS6 applications download at full speed, and it is powered from the USB port with only about 3 mA drawn from the KNX bus.\u003c\/p\u003e\n\u003cp\u003eThe interface is galvanically isolated between USB and bus and appears in ETS as a standard HID\/cEMI device, with no driver installation. Three LEDs show USB, KNX and traffic state. In the 1-module DIN housing it can stay permanently in the panel as a service port; the USB cable should not exceed 5 m.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKNX TP to USB-C interface for ETS programming and bus monitoring\u003c\/li\u003e\n\u003cli\u003eLong frame support, APDU 233 bytes, KNX System B\u003c\/li\u003e\n\u003cli\u003eHID \/ cEMI protocol, no driver installation (ETS 4 and later)\u003c\/li\u003e\n\u003cli\u003eGalvanic isolation between USB and KNX\u003c\/li\u003e\n\u003cli\u003ePowered from USB (\u0026lt; 15 mA); KNX bus load \u0026lt; 3 mA\u003c\/li\u003e\n\u003cli\u003e3 status LEDs: USB, KNX, traffic\u003c\/li\u003e\n\u003cli\u003eUSB cable length up to 5 m (16 ft)\u003c\/li\u003e\n\u003cli\u003e1-module (18 mm) PC DIN housing, approx. 40 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eFrom USB port, \u0026lt; 15 mA; KNX bus 21–32 V DC, \u0026lt; 3 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterfaces\u003c\/td\u003e\n\u003ctd\u003eKNX TP; USB-C (USB 2.0 full speed, HID \/ cEMI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax APDU\u003c\/td\u003e\n\u003ctd\u003e233 bytes (long frames); System B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax USB cable length\u003c\/td\u003e\n\u003ctd\u003e5 m (16 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eGalvanic isolation USB \/ KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\u003ctd\u003e3 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail, 1 module (18 mm \/ 0.71 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003ePC, IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eIN00C01USB USB interface (no parameters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.08 kg (0.18 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIN00C01USB \/ 8054144525365\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eNetwork-based programming interfaces: IN00S01IPI (IP interface, 8 tunnels) and IN00S01RIP (IP router). Line coupler: LC00S01KNX. Power supplies: PS00D03KNX, PS00D04KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_IN00C01USBKNXFI00010100_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50561693122816,"sku":"IN00C01USB","price":243.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IN00C01USB-3.jpg?v=1791484742","url":"https:\/\/www.knxsupply.com\/products\/eelectron-in00c01usb-knx-usb-interface-reg-usb-c","provider":"KNX Supply","version":"1.0","type":"link"}