{"title":"Switching\/Shutter Actuators","description":"","products":[{"product_id":"relay-module-8-x-20a-120-277vac","title":"Relay Module, 8 x 20A, 120\/277VAC","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003eThe application program “20 A8 Binary with status 900701” is used for carrying out the switch functions of the 8-fold load switch N 512.\u003c\/p\u003e\n\u003cp\u003eBy assigning parameters, it is possible to define whether all 8 channels are controlled independently or whether 3 channels or 2 times 3 channels are combined and controlled simultaneously by the application program.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel has a communication object available for switching, status interrogation and logic operations. It is also possible to assign the following parameters for each\u003cbr data-mce-fragment=\"1\"\u003echannel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eLogic operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eStarting value of switching object \/ logic operation on bus voltage recovery\u003c\/li\u003e\n\u003cli\u003eOn delay\u003c\/li\u003e\n\u003cli\u003eOff delay\u003c\/li\u003e\n\u003cli\u003eRelay mode: normally open\/normally closed contact\u003c\/li\u003e\n\u003cli\u003eOperating mode: normal mode\/time switch\u003c\/li\u003e\n\u003cli\u003eBehaviour on bus voltage failure (independent of the logic object)\u003c\/li\u003e\n\u003cli\u003eSend status object: read only \/ on change in object value\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll the above parameters are available for a group of 3 channels (channels A,B,C and\/or channels E,F,G) for carrying out applications that require simultaneous\u003cbr\u003eswitching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eMaximum number of group addresses: 52\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eMaximum number of associations: 52\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44135306723584,"sku":"5WG15121CB01","price":710.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/image-2.jpg?v=1734026578"},{"product_id":"dali-2-rm8","title":"DALI-2 RM8","description":"\u003cp\u003eDALI-2 Relay, 8A permanent, 80A Inrush, normally open, DALI supplied, built in\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe relay module is powered directly by the DALI line and must not be connected to the mains.\u003c\/li\u003e\n\u003cli\u003eIt typically consumes 2.7mA, requiring a DALI power supply (DALI PS) for operation.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI line is polarity-free, and the DALI input is protected  against overvoltage up to 250VAC.\u003c\/li\u003e\n\u003cli\u003eFor RM8\/16 and RM16-DE types, the DALI terminals are connected through internally as shown on the housing.\u003c\/li\u003e\n\u003cli\u003eThe RM8\/16 relay output supports loads up to 2000VA and switching currents up to 16A, depending on the type.\u003c\/li\u003e\n\u003cli\u003eTo prevent the load current from exceeding the relay’s maximum switching current, an appropriate automatic circuit breaker must be installed.\u003c\/li\u003e\n\u003cli\u003eSwitching occurs at the zero-crossing of AC voltage.\u003c\/li\u003e\n\u003cli\u003eThe RM16 DE (Art.Nr.: 86458629-DE) and RM16 HS (Art.Nr.: 86458629-HS) types feature an integrated current limiter, making them ideal for loads with high inrush current over 100A.\u003c\/li\u003e\n\u003cli\u003eThe DALI-2 versions (art.nr.: 86456944-_ and art.nr.: 86456203-_) are functionally identical to the original DALI variants but include DALI-2 certification and the \"Identify\" function for enhanced configuration and addressing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Standard","offer_id":49035055038720,"sku":"86456944","price":126.72,"currency_code":"USD","in_stock":true},{"title":"WE Changeover","offer_id":49035055071488,"sku":"86456944-WE","price":135.36,"currency_code":"USD","in_stock":true},{"title":"DIN Rail","offer_id":49035055104256,"sku":"86456944-HS","price":109.44,"currency_code":"USD","in_stock":true},{"title":"DIN Rail WE","offer_id":49035055137024,"sku":"86456944-HS-WE","price":142.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-4ch-rc-hs","title":"DALI 4Ch RC HS","description":"\u003cp\u003e4 DALI addresses to DC Digital output \/ pilot relay, DALI DT7, 12-48, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe DALI 4Ch RC offers 4 independent channels, of which each channel can be individually controlled via DALI. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHence loads can be switched on and off.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSince each channel provides an integrated free-wheeling circuit, the module is suitable for inductive loads like coils of relays and circuit breakers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel of the DALI 4Ch RC acts like a standard DALI ballast for non dimmable loads.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt is based on the DALI specification for control gear (IEC 62386-102) and the device type 7 extension (IEC 62386-208). \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTherefore the switching characteristic is determined by the comparison of the virtual direct arc power level (VDAP) with 4 thresholds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe virtual dim level (VDAP) is like the dim level of DALI-ballasts and is therefore limited by MINLEVEL and MAXLEVEL and influenced by fade-time and fade-rate.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor each dim direction 2 thresholds can be defined. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThey are compared with the virtual dim level and as a result the output is switched on or off.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073894144,"sku":"89453860-HS","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-89453860-DE-and-89453860-HS-DALI-2-4Ch-RC.jpg?v=1751922342"},{"product_id":"knx-io-510-1-2o","title":"KNX IO 510.1 (2O)","description":"\u003cp\u003eThe \u003cstrong\u003eKNX IO 510.1 secure (2O) \u003c\/strong\u003eis a\u003cstrong\u003e compact switching actuator with 2 bi-stable relay outputs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe actuator provides the function for universal outputs including scene control, timer, staircase lightning and to control heating valves (PWM for thermoelectric valve drives).\u003c\/p\u003e\n\u003cp\u003eTwo push buttons and three LEDs allow a local operation and a visualization of the device state.\u003c\/p\u003e\n\u003cp\u003eIn addition to the output channels the device includes 16 independent functions for logic or timer control.\u003c\/p\u003e\n\u003cp\u003eThe device supports \u003cstrong\u003eKNX Data Security,\u003c\/strong\u003e but may also used without it.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":44300328272128,"sku":"510.1","price":128.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-510-knx-io-5224-xl-kopie-min.png?v=1708995545"},{"product_id":"knx-io-511-1-1o2i","title":"KNX IO 511.1 (1O2I)","description":"\u003cp\u003eThe\u003cstrong\u003e KNX IO 511.1 \u003cem\u003esecure\u003c\/em\u003e (1O2I) \u003c\/strong\u003eis a\u003cstrong\u003e compact switching actuator with 1 bi-stable output and 2 binary inputs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).\u003c\/p\u003e\n\u003cp\u003eThe inputs can be connected to conventional switches with an external voltage of 12 to 230 V.\u003c\/p\u003e\n\u003cp\u003eIn ex-factory settings the inputs are connected internally to the actuator.\u003c\/p\u003e\n\u003cp\u003eThe actuator combined with input B1 serves as a latching relay.\u003c\/p\u003e\n\u003cp\u003eInput B2 is used for zero crossing detection.\u003c\/p\u003e\n\u003cp\u003eTwo push buttons and three LEDs allow a local operation and a visualization of the device state.\u003c\/p\u003e\n\u003cp\u003eIn addition to the output and input channels the device includes 16 independent functions for logic or timer control.\u003c\/p\u003e\n\u003cp\u003eThe device supports \u003cstrong\u003eKNX Data Security.\u003c\/strong\u003e\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":44300328304896,"sku":"511.1","price":125.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-511-knx-io-secure-5327-xl-kopie-min.png?v=1708995608"},{"product_id":"knx-io-520-1j2i","title":"KNX IO 520 (1J2I)","description":"\u003cp\u003eThe \u003cstrong\u003eKNX IO 520 (1J2I)\u003c\/strong\u003e is a \u003cstrong\u003ecompact blind actuator with two additional binary inputs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe actuator is used to control a blind, a shutter or a window drive.\u003c\/p\u003e\n\u003cp\u003eThe relay contacts are electrically interlocked.\u003c\/p\u003e\n\u003cp\u003eThe inputs can be connected to conventional switches with an external voltage of 12 to 230 V.\u003c\/p\u003e\n\u003cp\u003eIn the not configured state the binary inputs control the actuator channel.\u003c\/p\u003e\n\u003cp\u003eVia commissioning the device using ETS® software the binary inputs can be used independently.\u003c\/p\u003e\n\u003cp\u003eTwo push buttons and three LEDs allow a local operation and a visualization of the device state.\u003c\/p\u003e\n\u003cp\u003eIn addition to the output and input channels the device includes 16 independent functions for logic or timer control.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":44300328534272,"sku":"520","price":120.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-520-knx-io-5225-xl-kopie-min_png.webp?v=1706408817"},{"product_id":"knx-multi-io-580-ip","title":"KNX Multi IO 580 (IP)","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eKNX IP Multi IO 580 (48I\/O) \u003c\/strong\u003e\u003cspan\u003eis a\u003c\/span\u003e\u003cstrong\u003e universal binary interface \u003c\/strong\u003e\u003cspan\u003efor building control. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt provides \u003c\/span\u003e\u003cstrong\u003e48 I\/O lines\u003c\/strong\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach line can be used as binary input as well as binary output. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe peripherals can be fed by an external voltage of 24 V⎓. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChannels which are configured as inputs can be used to control lights or blinds via the KNX network. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThey also can be used to count impulses, e.g. as interface for energy meters. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChannels which are configured as outputs can directly drive signal LEDs, external coupling relays (e.g. \u003c\/span\u003e\u003ca href=\"https:\/\/weinzierl.de\/en\/products\/multi-io-extension-switch-590\/\"\u003eMulti IO Extension Switch 590\u003c\/a\u003e\u003cspan\u003e) or jalousie relays (\u003c\/span\u003e\u003ca href=\"https:\/\/weinzierl.de\/en\/products\/multi-io-extension-shutter-592\/\"\u003eMulti IO Extension Switch 592\u003c\/a\u003e\u003cspan\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe device works using the medium KNX IP. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt can be configured using the ETS with native parameters and standard group objects. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso the KNX addressing scheme, based on individual device address and group objects, is unchanged. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn easy to read OLED display on the front panel enables a manual operation to test the installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":44300329189632,"sku":"580","price":568.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-580-knx-ip-multi-io-5238-xl-kopie-min_png.webp?v=1706409986"},{"product_id":"multi-io-extension-switch-590","title":"Multi IO Extension Switch 590","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eThe Multi IO Extension Switch 590 serves as a power-saving alternative to commercial standard coupling relays\u003c\/strong\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe coupling relay is controlled as a mono-stable relay, but uses a bi-stable relay internally, thus reducing the holding current by up to 95%.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Multi IO Extension Switch 590 has an integrated fuse to protect high-quality equipment.\u003c\/p\u003e\n\u003ch3 class=\"box4\"\u003eSpare relays\u003c\/h3\u003e\n\u003ch4\u003eStandard relays for Multi IO Extension Switch 590\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArt.-Nr. 5347\u003cbr\u003eEAN: 42 6026277 347 0\u003c\/li\u003e\n\u003cli\u003eContact material: AgSnO2\u003c\/li\u003e\n\u003cli\u003eInput 24 V\u003c\/li\u003e\n\u003cli\u003eOutput 230 V \/ 16 A, bi-stable\u003c\/li\u003e\n\u003cli\u003eDelivery unit: 10 pcs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecial relays for Multi IO Extension Switch 590\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArt.-Nr. 5348\u003cbr\u003eEAN: 42 6026277 348 7\u003c\/li\u003e\n\u003cli\u003eContact material: \u003cstrong\u003eTungsten\u003c\/strong\u003e \/ AgSnO2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFor high inrush currents, e.g. for LED lamps\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eInput 24 V\u003c\/li\u003e\n\u003cli\u003eOutput 230 V \/ 16 A, bi-stable\u003c\/li\u003e\n\u003cli\u003eDelivery unit: 10 pcs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eArt.-Nr. 5349\u003cbr\u003eEAN: 42 6026277 349 4\u003c\/li\u003e\n\u003cli\u003eContact material: AgSnO2\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFor manual operation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eInput 24 V\u003c\/li\u003e\n\u003cli\u003eOutput 230 V \/ 16 A, bi-stable\u003c\/li\u003e\n\u003cli\u003eDelivery unit: 10 pcs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":44300331647232,"sku":"590","price":44.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-590-multi-io-extension-5321-xl-kopie-min_png.webp?v=1706410515"},{"product_id":"jb512c23-switching-actuator-relay-1-x-20-amp-ac120-277v-pl","title":"JB 512C23 - Switching actuator 1 x AC 120...277 V, 20 A or 1 x AC 347 V, 15 AX, C load","description":"\u003cp\u003eSwitching actuator 1 x AC 120...277 V, 20 A or 1 x AC 347 V, 15 AX, C load\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe actuator output may be configured independently to provide switching, manual override, forced control, logical gate and status reporting.\u003c\/li\u003e\n\u003cli\u003eFurthermore, if required, timelimited switching instead of permanent switching on can be enabled via an optional \"Night mode\" object (e.g. for lighting while cleaning), if need be with a warning before switching off by multiple switching the output on and off (flashing).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmongst others, the application program includes an optional count of switching cycles and operating hours with threshold monitoring for each output and an integrated 8-bit scene control, in which the output can be incorporated into\u003cbr\u003eup to 8 scenes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach output of the actuator may be set to one of the following operating modes:\u003cbr\u003e- Normal operation\u003cbr\u003e- Timer operation\u003cbr\u003e\u003cstrong\u003eBuilding site function\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe building site function provided ex-factory enables switching the building site lighting on and off via bus wall switches and actuators, even if these devices have not yet been commissioned with ETS.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44302764638464,"sku":"5WG15124CB23","price":156.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/P_I201_XX_08154i.jpg?v=1706496254"},{"product_id":"jb526c23-switch-dimmer-2-x-20a-120-347v-0-to-10vdc-pl","title":"JB 526C23 - Switch\/dim actuator, 2 x AC 277 V, 20 A, 1...10 V","description":"\u003cp\u003eSwitch\/dim actuator, 2 x AC 277 V, 20 A, 1...10 V\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device is a KNX device for controlling up to two groups (channels) of lamps via the DC 0\/1-10 V control terminal of dimmable led drivers (ECGs).\u003c\/li\u003e\n\u003cli\u003eIn addition, there is per channel a switching contact for direct switching on\/off of the connected lamps.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe device is installed into or attached to a 4 x 4 inch junction box. The bus is connected via a bus terminal block.\u003c\/li\u003e\n\u003cli\u003eThe actuator electronics are supplied via the bus voltage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEach channel can control several dimmable electronic ballasts.\u003c\/li\u003e\n\u003cli\u003eTheir number is limited by the switching capacity and by the control power.\u003c\/li\u003e\n\u003cli\u003eIf the on\/off function is not used via the switching contact, the number of controllable ECGs is only dependent on the load of the DC 0\/1-10 V control voltage.\u003c\/li\u003e\n\u003cli\u003eThis might allow controlling a larger number of drivers (see Technical Specifications below).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVarious functions can be configured per channel such as for switching on\/off lamps, dimming up \/ down or setting a particular dimming level.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmongst others, the application program includes an optional counter for switching cycles and operating hours with threshold monitoring for each output and an integrated 8-bit scene  control for incorporating the output into\u003cbr\u003eup to 8 scenes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44302764835072,"sku":"5WG15264CB23","price":426.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/A6V11169029_7d026845-e258-4ad1-adef-21b6e80550e0.jpg?v=1747213146"},{"product_id":"jb527c23-switch-dimmer-1-x-20a-120-347v-0-to-10vdc-pl","title":"JB 527C23 - Switch\/dim actuator, 1 x AC 277 V, 20 A, 1...10 V","description":"\u003cp\u003eSwitch\/dim actuator, 1 x AC 277 V, 20 A, 1...10 V\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device is a KNX device for controlling one group (channels) of lamps via the DC 0\/1 -10 V control terminal of dimmable LED drivers (ECGs).\u003c\/li\u003e\n\u003cli\u003eIn addition, there is a switching contact for direct switching on\/off of the connected lamps.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe device is installed into or attached to a 4 x 4 inch junction box. The bus is connected via a bus terminal block.\u003c\/li\u003e\n\u003cli\u003eThe actuator electronics are supplied via the bus voltage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe device can control several dimmable electronic ballasts.\u003c\/li\u003e\n\u003cli\u003eTheir number is limited by the switching capacity and by the control power.\u003c\/li\u003e\n\u003cli\u003e If the on\/off function is not used via the switching contact, the number of controllable ECGs is only dependent on the load of the DC 0\/1-10 V control voltage.\u003c\/li\u003e\n\u003cli\u003eThis might allow controlling a larger number of ECGs (see Technical Specifications below).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVarious functions can be configured such as for switching\u003cbr\u003eon\/off lamps, dimming up \/ down or setting a particular\u003cbr\u003edimming level.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmongst others, the application program includes an optional counter for switching cycles and operating hours with threshold monitoring for each output and an integrated 8-bit scene control for incorporating the output into\u003cbr\u003eup to 8 scenes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44302764867840,"sku":"5WG15274CB23","price":251.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/P_I201_XX_08411i.jpg?v=1706496111"},{"product_id":"n513-11-relay-load-check-3x20a-120-277v-16a-347v-main","title":"N 513\/11 - Switch actuator, main module, 3 x AC 230\/400 V, 20 AX, C load, Load-check","description":"\u003cul\u003e\n\u003cli\u003eThe switching actuator main module N 513\/11 is a DINrail mounted device in N-system dimensions.\u003c\/li\u003e\n\u003cli\u003eIt can switch three groups of electrical consumers, independent of each other, via its three relay contact outputs, each with load current measurement and monitoring (loadcheck).\u003c\/li\u003e\n\u003cli\u003eThe bus is connected via a bus terminal block. The actuator electronics are supplied via the bus voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnection of switching actuator sub-modules\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA switching actuator sub-module N 513\/21, N 512\/21 or N 562\/21 (see device B in figure 1) can be connected to the switching actuator main module N 513\/11 (see device A in figure 1) via the 6-pin interface with a special jumper.\u003c\/li\u003e\n\u003cli\u003eA further switching actuator sub-module can be connected likewise to a previous switching actuator submodule.\u003c\/li\u003e\n\u003cli\u003eIn total up to 4 switching actuator sub-modules N 513\/21, N 512\/21 or N 562\/21 can be connected in series to a switching actuator main module N 513\/11, so that a main module, if need be, can be extended simply from a 3-fold to a 6-, 9-, 12- or 15-fold switching actuator and thus be matched flexibly to the size and number of loads to be switched.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44302764900608,"sku":"5WG1513-1AB11","price":432.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Capturadepantalla2024-01-28alas21.56.34.png?v=1706497004"},{"product_id":"n513-21-relay-load-check-3x20a-120-277v-16a-347v-sub","title":"N 513\/21 - Switch actuator submodule, 3 x AC 230\/400 V, 20 AX, C load, load-check","description":"\u003cul\u003e\n\u003cli\u003eThe switching actuator sub-module N 513\/21 is a DIN-rail mounted device in N-system dimensions.\u003c\/li\u003e\n\u003cli\u003eIt can switch three groups of electrical consumers, independent of each other, via its three relay contact outputs, each with load current measurement and monitoring (load-check). \u003c\/li\u003e\n\u003cli\u003eThe sub-module cannot be operated stand-alone or be directly connected to the bus.\u003c\/li\u003e\n\u003cli\u003eBut it can be connected via a special 6-pole bridging connector either with a switching actuator main module N 513\/11, N 512\/11 or N 562\/11 or with another sub-module N 513\/21, N 512\/21 or N 562\/21, which is already connected to a main module (see figure 1). \u003c\/li\u003e\n\u003cli\u003eThe sub-module electronics are supplied by bus voltage via the 6-pole bridging con-nector.\u003c\/li\u003e\n\u003cli\u003eIn total up to 4 switching actuator submodules can be connected in series to a switching actuator main module, so that a main module, if need be, can be extended simply from a 3-fold to a 6-, 9-, 12- or 15-fold switching actuator and thus be matched flexibly to the number of loads to be switched.\u003c\/li\u003e\n\u003cli\u003eIt is indicated by flashing of the corresponding green LED A to E on the top of the main module if more submodules are set than are actually connected or if the set submodule type does not correspond with the submodule type actually connected or if a submodule is detected as faulty.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIEMENS","offers":[{"title":"Default Title","offer_id":44302765424896,"sku":"5WG1513-1AB21","price":215.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Captura_de_pantalla_2025-05-14_112833.png?v=1747214927"},{"product_id":"rs485-motor-controller-wm","title":"RS485 Motor Controller WM","description":"\u003cp\u003e\u003cstrong\u003eFlexible installation\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003esuspended ceiling\/raised floor,\u003cbr\u003eunder-window or wall-mounted wiring channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick installation and connection of the motor controller through\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug and play relief\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable tension relief points to tighten cables to the housing of the product\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaisy chaining of several RS485 motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith the Somfy SDN configuration software the motor settings can be done before configuring via ETS software.\u003c\/p\u003e\n\u003cp\u003ePerfect alignment of the blind thanks to the increment encoder technology of the RS485 motors.\u003cbr\u003eThe exact position of the blind during move and when reaching the upper and lower end limits can be monitored.\u003cbr\u003eUsing a one Byte telegram over the KNX, the blind can be moved to numerous intermediate positions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Captura_de_pantalla_2025-09-11_a_la_s_12.38.01_p.m..png?v=1757613267\" alt=\"\"\u003e\u003cstrong\u003eWorks with\u003c\/strong\u003e: \u003cbr\u003eSonesse®️ 30 RS485 \u003cbr\u003eSonesse®️ 40 RS485 \u003cbr\u003eLT 50 RS485 \u003cbr\u003eSonesse 50 RS485\u003cbr\u003eSonesse ULTRA 50 RS485 AC\u003cbr\u003eSonesse ULTRA 50 RS485 DC \u003cbr\u003eGlydea Ultra RS485\u003c\/p\u003e","brand":"SOMFY","offers":[{"title":"Default Title","offer_id":47006325211392,"sku":"1860286","price":343.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/WhatsAppImage2025-09-11at12.29.47.jpg?v=1757614447"},{"product_id":"knx-io-532-1d1o-copy","title":"KNX IO 532.1 secure","description":"\u003cp\u003eThe KNX IO 532.1 secure is a compact combined dimming\/switching actuator with 1 PWM dimming output for LEDs and 1 bistable relay output.\u003c\/p\u003e\n\u003cp\u003eThe dimming actuator can be used e.g. for LED panels or stripes.\u003c\/p\u003e\n\u003cp\u003eBesides controlling the dimmer by switching, rel. dimming and dimming value, several optional functions are integrated, including scenes, automatic, slumber function or staircase light.\u003c\/p\u003e\n\u003cp\u003eThe switching actuator provides the function for universal outputs including scene control, timer, staircase lighting and heating valves (PWM for thermoelectric valve drives).\u003c\/p\u003e\n\u003cp\u003eTwo push buttons and three LEDs allow a local operation and a visualization of the device state.\u003c\/p\u003e\n\u003cp\u003eIn addition to the output channels the device includes 16 independent functions for logic or timer control.\u003c\/p\u003e\n\u003cp\u003eThe device supports KNX Data Security.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":47255663313152,"sku":"532.1","price":167.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/5555.webp?v=1762906394"},{"product_id":"knx-multi-io-570-tp-copy","title":"KNX TP Multi IO 570.1 secure","description":"\u003cp\u003e\u003cstrong\u003eThe KNX TP Multi IO 570.1 secure\u003c\/strong\u003e is a universal binary interface for building control.\u003c\/p\u003e\n\u003cp\u003eIt provides \u003cstrong\u003e48 input \/ output chanels\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach line can be used as binary input as well as binary output.\u003c\/p\u003e\n\u003cp\u003eThe peripherals can be fed by an external voltage of 24 V⎓. Channels which are configured as inputs can be used to control lights or blinds via the KNX network.\u003c\/p\u003e\n\u003cp\u003eThey also can be used to count impulses, e.g. as interface for energy meters.\u003c\/p\u003e\n\u003cp\u003eChannels which are configured as outputs can directly drive signal LEDs, external coupling relays (Multi IO Extension Switch 590) or jalousie relays (Multi IO Extension Shutter 592).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe integrated USB interface\u003c\/strong\u003e allows establishing a bidirectional connection between a PC and the KNX bus.\u003c\/p\u003e\n\u003cp\u003eThe USB connector has a galvanic separation from the KNX bus.\u003c\/p\u003e\n\u003cp\u003eBoth ETS (Version 5.7 or later) and visualization tools support this interface.\u003c\/p\u003e\n\u003cp\u003eThe configuration of the device is done with ETS, a local download is possible.\u003cbr\u003eAn easy to read\u003cstrong\u003e OLED display\u003c\/strong\u003e on the front panel enables a manual operation to test the installation.\u003c\/p\u003e\n\u003cp\u003eThe device supports \u003cstrong\u003eKNX Data Security\u003c\/strong\u003e. \u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":47267518382336,"sku":"570.1","price":489.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/570.1......png?v=1763059847"},{"product_id":"knx-io-512-secure-12o","title":"KNX IO 512 secure (12O)","description":"\u003cp\u003eThe KNX IO 512 \u003cem\u003esecure\u003c\/em\u003e is a compact KNX switching actuator with central power supply and 12 bistable relay outputs (230 V~, 16 A), optimised primarily for the requirements of LED lights. Functions for universal output, staircase lighting, heating actuator and more. Mains failure detection with communication object, switching in zero crossing, and time-delayed switching with central commands. Integrated logic and time functions. Manual operation without bus voltage and via ETS. Support of KNX Security. Connections: KNX, screw terminals for IO. For DIN rail, width 4 units (72 mm). Art. no. 5491.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":49031179796736,"sku":"512","price":419.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-512-knx-io-secure-5491-m-1.png?v=1784502980"},{"product_id":"knx-io-522-secure-6j","title":"KNX IO 522 secure (6J)","description":"\u003cp\u003eThe KNX IO 522 \u003cem\u003esecure\u003c\/em\u003e is a compact KNX blind actuator with central power supply and 6 channels for electric drives (230 V~, 16 A). For blinds, roller shutters or window openers, with position movement via time calculation. Drive directions are electro-mechanically interlocked against each other to prevent motor damage. Integrated logic and time functions, mains powerdown function. Manual operation without bus voltage and via ETS. Support of KNX Security. Connections: KNX, screw terminals for IO. For DIN rail, width 6 units (108 mm). Art. no. 5496.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":49031179927808,"sku":"522","price":419.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-522-knx-io-secure-5496-m.png?v=1784502980"},{"product_id":"knx-io-520-1-secure-1j2i","title":"KNX IO 520.1 secure (1J2I)","description":"\u003cp\u003eThe KNX IO 520.1 \u003cem\u003esecure\u003c\/em\u003e is a compact blind\/shutter actuator with one shutter output (230 V~, 8 A) and two additional binary inputs (12..230 V, galvanically isolated). For blinds, shutters or window drives, with approach position via time calculation. Drive directions are electro-mechanically locked against each other. Integrated logic and timer functions. Direct operation with the ETS without download. Support of KNX Security. Connections: KNX, pluggable screw terminals for IO. For DIN rail, width 1 unit (18 mm). Art. no. 5515.\u003c\/p\u003e","brand":"WEINZIERL","offers":[{"title":"Default Title","offer_id":49031179960576,"sku":"520.1","price":120.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/weinzierl-520-1-knx-io-5515-m.png?v=1784502763"},{"product_id":"wdali-2-bt5-rm8-wireless-relay-module-8a","title":"wDALI-2 BT5 RM8 – Wireless Relay Module 8A","description":"\u003cp\u003eThe Lunatone wDALI-2 BT5 RM8 puts a DALI-switched relay where no bus wire can reach. The mains-powered receiver module holds an \u003cstrong\u003e8A relay (1000VA)\u003c\/strong\u003e for non-dimmable loads and receives its DALI on\/off commands over Bluetooth 5 from a wDALI-2 BT5 Bridge connected to the DALI line. Wireless range 8–12m indoors (up to 150m open field) — detached luminaires, signage, fountains or any switched load across a gap where cabling isn't an option.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8A relay, 1000VA nominal, 60A inrush — normally open, resistive switching \u0026gt;10⁵ operations\u003c\/li\u003e\n\u003cli\u003eWireless DALI over Bluetooth 5, paired with the wDALI-2 BT5 Bridge (transmitter side)\u003c\/li\u003e\n\u003cli\u003eMains supplied 210–250V AC — no bus wiring at the load\u003c\/li\u003e\n\u003cli\u003eCompact 59 × 33 × 15 mm for back-box installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003e210–250V AC, 50–60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay\u003c\/td\u003e\n\u003ctd\u003e8A continuous, 1000VA, 60A inrush, max. 1Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless\u003c\/td\u003e\n\u003ctd\u003eBluetooth 5, 8–12m indoors \/ 150m open field\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e59 × 33 × 15 mm · IP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eRequires a wDALI-2 BT5 Bridge on the DALI line as transmitter — sold separately.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":49034098147584,"sku":"87452993","price":141.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-89453348-and-87452993-wDALI-2-BT5-RM8-1024x606.jpg?v=1784577213"},{"product_id":"dali-2-rm16-relay-module-16a","title":"DALI-2 RM16 – Relay Module 16A","description":"\u003cp\u003eThe Lunatone DALI-2 RM16 provides a \u003cstrong\u003e16A relay contact controlled via the DALI bus\u003c\/strong\u003e — the straightforward way to switch non-dimmable loads, socket circuits or ventilation from DALI commands. The current DALI-2 generation of the proven RM16, in back-box, DIN-rail (HS), ceiling (DE) and changeover-contact (WE) formats; contact configuration per version, see datasheet.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16A relay switched via DALI, one address; DALI-2 certified\u003c\/li\u003e\n\u003cli\u003ePower-up and system-failure behaviour configurable via DALI Cockpit\u003c\/li\u003e\n\u003cli\u003eFormats: standard, I \/ IS DIN rail, DIN rail with changeover contact (WE), DE ceiling housing with strain relief\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay\u003c\/td\u003e\n\u003ctd\u003e16A, mains loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI, 1 address, bus powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eFour channels in one DIN module: DALI-2 4xRM16. High inrush loads: DALI-2 RM25.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Standard","offer_id":49035055169792,"sku":"86456753","price":141.12,"currency_code":"USD","in_stock":true},{"title":"I DIN Rail","offer_id":49035055202560,"sku":"86456203-I-HS","price":136.8,"currency_code":"USD","in_stock":true},{"title":"IS DIN Rail","offer_id":49035055235328,"sku":"86456203-IS-HS","price":144.0,"currency_code":"USD","in_stock":true},{"title":"DIN Rail WE","offer_id":49035055268096,"sku":"86456203-HS-WE","price":149.76,"currency_code":"USD","in_stock":true},{"title":"DE Ceiling","offer_id":49035055300864,"sku":"86456203-DE","price":139.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-2-4xrm16-4-channel-relay-module-din-rail","title":"DALI-2 4xRM16 – 4-Channel Relay Module DIN Rail","description":"\u003cp\u003eThe Lunatone DALI-2 4xRM16 packs \u003cstrong\u003efour independent 16A relay contacts into one DIN-rail module\u003c\/strong\u003e, each channel with its own DALI address — switch four circuits from the bus in a single distribution-board slot. The efficient choice when a panel serves several non-dimmable loads.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 × 16A relays, one DALI address per channel\u003c\/li\u003e\n\u003cli\u003ePower-up and system-failure behaviour configurable via DALI Cockpit\u003c\/li\u003e\n\u003cli\u003eDIN-rail format for distribution boards; DALI-2 certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelays\u003c\/td\u003e\n\u003ctd\u003e4 × 16A, mains loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI, 4 addresses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eSingle-channel versions: DALI-2 RM16 and RM8.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":49035055333632,"sku":"86456881-HS","price":295.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-2-rm25-relay-module-25a-high-inrush","title":"DALI-2 RM25 – Relay Module 25A High Inrush","description":"\u003cp\u003eThe Lunatone DALI-2 RM25 is built for the hard loads: a DALI-controlled relay rated for \u003cstrong\u003einrush currents up to 1000A\u003c\/strong\u003e and permanent loads up to 4000VA — LED driver banks, transformer loads and capacitive circuits that would weld a standard relay. Switching happens purposefully at the voltage zero crossing, extending contact life.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e25A relay, up to 4000VA permanent load, 1000A inrush capability\u003c\/li\u003e\n\u003cli\u003eZero-crossing switching for maximum contact lifetime\u003c\/li\u003e\n\u003cli\u003ePower-up and system-failure behaviour configurable via DALI Cockpit; DALI-2 certified\u003c\/li\u003e\n\u003cli\u003eDIN-rail (HS) or remote-ceiling (DE, with strain relief) formats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay\u003c\/td\u003e\n\u003ctd\u003e25A · 4000VA · 1000A inrush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI, 1 address\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching\u003c\/td\u003e\n\u003ctd\u003eAt voltage zero crossing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LUNATONE","offers":[{"title":"DIN Rail","offer_id":49035055366400,"sku":"86457294-HS","price":194.4,"currency_code":"USD","in_stock":true},{"title":"DE Ceiling","offer_id":49035055399168,"sku":"86457294-DE","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-4ch-rc-4-channel-relay-controller","title":"DALI 4Ch RC – 4-Channel Relay Controller","description":"\u003cp\u003eThe Lunatone DALI 4Ch RC is a \u003cstrong\u003e4-channel relay controller\u003c\/strong\u003e for DALI systems: four independently addressable relay contacts to switch non-dimmable loads from the bus. Available as DIN-rail module for distribution boards or DE ceiling housing with strain relief.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 relay channels, one DALI address each\u003c\/li\u003e\n\u003cli\u003ePower-up and system-failure behaviour configurable via DALI Cockpit\u003c\/li\u003e\n\u003cli\u003eDIN-rail (HS) or DE ceiling formats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4 × relay, mains loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI, 4 addresses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LUNATONE","offers":[{"title":"DE Ceiling","offer_id":49035055497472,"sku":"89453860-DE","price":106.56,"currency_code":"USD","in_stock":true},{"title":"DIN Rail","offer_id":49035055530240,"sku":"89453860-HS","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-2-4ch-e-rm-4-channel-electronic-relay-din-rail","title":"DALI-2 4Ch E-RM – 4-Channel Electronic Relay DIN Rail","description":"\u003cp\u003eThe Lunatone DALI-2 4Ch E-RM packs \u003cstrong\u003efour DALI-controlled electronic relay channels\u003c\/strong\u003e into one DIN-rail module — silent, wear-free solid-state switching for four circuits, each channel on its own DALI address. The electronic alternative to mechanical relays where switching cycles are high or clicks are unwelcome.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 electronic switching channels, one DALI address each\u003c\/li\u003e\n\u003cli\u003eSilent, wear-free solid-state operation\u003c\/li\u003e\n\u003cli\u003eConfigurable via DALI Cockpit; DALI-2 certified\u003c\/li\u003e\n\u003cli\u003eDIN-rail format\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4 × electronic switch, 230V loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI, 4 addresses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":49035055595776,"sku":"86450563-HS","price":226.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-2-rm5-relay-module-5a","title":"DALI-2 RM5 – Relay Module 5A","description":"\u003cp\u003eThe Lunatone DALI-2 RM5 is the compact entry relay of the DALI-2 family: a 5A contact switched via the bus, one DALI address, back-box format — for small non-dimmable loads where a 16A module is oversized.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5A relay switched via DALI, one address\u003c\/li\u003e\n\u003cli\u003eDALI-2 certified; configurable power-up and failure behaviour\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":49035293556992,"sku":"86456114","price":113.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-2-jalousie-blind-shutter-actuator","title":"DALI-2 Jalousie – Blind \u0026 Shutter Actuator","description":"\u003cp\u003eThe Lunatone DALI-2 Jalousie brings \u003cstrong\u003eblinds, shutters and shades into the DALI system\u003c\/strong\u003e: a dedicated actuator for 230V drive motors with DALI control of up\/down travel and slat position — daylight management and lighting on one bus, one commissioning tool. Available as DIN-rail or DE ceiling module.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlind\/shutter motor actuator controlled via DALI, position and slat control\u003c\/li\u003e\n\u003cli\u003eCombine with Lunatone sensors and controls for automated daylight strategies\u003c\/li\u003e\n\u003cli\u003eDALI-2 certified; configurable via DALI Cockpit\u003c\/li\u003e\n\u003cli\u003eDIN-rail (HS) or ceiling (DE) formats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad\u003c\/td\u003e\n\u003ctd\u003e230V blind\/shutter motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eDALI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"LUNATONE","offers":[{"title":"DIN Rail","offer_id":49035293589760,"sku":"86458676-HS","price":226.08,"currency_code":"USD","in_stock":true},{"title":"DE Ceiling","offer_id":49035293622528,"sku":"86458676-DE","price":226.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-rm16-changeover-wieland-versions","title":"DALI RM16 – Changeover \u0026 Wieland Versions","description":"\u003cp\u003eCurrent specialty versions of the classic Lunatone DALI RM16 relay: the DE housing with \u003cstrong\u003echangeover contact (WE)\u003c\/strong\u003e for switching between two circuits, and the \u003cstrong\u003eWieland-connector\u003c\/strong\u003e version for fast pluggable installation in prefabricated wiring systems.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e16A relay switched via DALI, one address\u003c\/li\u003e\n\u003cli\u003eWE: changeover contact · CEL: Wieland GST18 connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCurrent DALI-2 generation in standard formats: DALI-2 RM16.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"DE Changeover (WE)","offer_id":49035295326464,"sku":"86458629-DE-WE","price":152.64,"currency_code":"USD","in_stock":true},{"title":"Wieland Connector","offer_id":49035295359232,"sku":"86458629-CEL","price":169.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/collections\/SWITCHING___SHUTTER.jpg?v=1781289634","url":"https:\/\/www.knxsupply.com\/collections\/switching-shutter-actuators.oembed","provider":"KNX Supply","version":"1.0","type":"link"}