{"title":"LUNATONE","description":"","products":[{"product_id":"dali-ps","title":"DALI 2 PS","description":"\u003cp\u003eDALI Power Supply 220mA, compact housing, DALI test button, info via Cockpit SW\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI-2 PS is intended for DIN rail mounting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnsure protection against electric shock b an appropriate enclosure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in a voltage-free state of the system and by qualified specialists.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNational regulations for setting up electrical systems must be followed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect power supply terminals L and N to mains voltage according to the labelling.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe polarity of the output voltage is marked on the housing (DA+, DA-)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"PS 250mA DIN Rail","offer_id":49035290837248,"sku":"24033444","price":146.88,"currency_code":"USD","in_stock":true},{"title":"PS128 (128mA)","offer_id":49035290870016,"sku":"24033444-128","price":108.0,"currency_code":"USD","in_stock":true},{"title":"PS12 100mA (9-16V in)","offer_id":49035290902784,"sku":"24033444-12VDO","price":80.64,"currency_code":"USD","in_stock":true},{"title":"PS24 100mA (24-48V in)","offer_id":49035290935552,"sku":"24033444-24VDO","price":80.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24033444-DALI-2-PS-Logo.jpg?v=1751922369"},{"product_id":"dali-ps2","title":"DALI PS2","description":"\u003cp\u003eDALI Power Supply 200mA, remote housing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI PS2 is intended for remote installation in the ceiling or in an enclosure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnsure proper working cable relief for installation in protection class II equipment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003c\/li\u003e\n\u003cli\u003eConnect power supply terminals L and N to mains voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe polarity of the output voltage is marked on the housing (DA+, DA-)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line may be installed within the same cable or as single conductors within the same tube as mains supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"PS2 200mA","offer_id":49035290968320,"sku":"24033444-2","price":126.72,"currency_code":"USD","in_stock":true},{"title":"PS2 30mA","offer_id":49035291001088,"sku":"24033444-30","price":67.68,"currency_code":"USD","in_stock":true},{"title":"PS2 80mA","offer_id":49035291033856,"sku":"24033444-80","price":73.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-PS2-24033444-UL-DALI-2.jpg?v=1751922369"},{"product_id":"dali-expander-3","title":"DALI Expander 3","description":"\u003cp\u003eDALI input 3 addresses to 3 x DALI Broadcast out, DALI PS 50mA each, 3x Sw\u0026amp;Dim input\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Expander-3 is intended for remote installation in the ceiling or in an\u003cbr\u003eenclosure, ensure proper cable relief for installation in protection class II devices\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect power supply terminals L and N to mains voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe polarity of the output voltage is marked on the housing (DA+, DA- (A,B,C))\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line may be installed within the same cable or as single conductors within the same tube as mains supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line must not be connected to the mains or other extra low voltage systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300070617344,"sku":"89453847-3","price":334.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/89453847-3-DALI-Expander-3-UL-1_7660d037-4696-470a-9d25-b8574cf00633.jpg?v=1751922364"},{"product_id":"dali-repeater-din-rail","title":"DALI Repeater DIN Rail","description":"\u003cp\u003eTransceiver for DALI line extension, no DALI PS, DIN rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Repeater is intended for remote installation in the ceiling or in an enclosure, ensure proper cable relief for installation in protection class II devices.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI Repeater HS-type is suited for DIN rail mounting.\u003c\/li\u003e\n\u003cli\u003eEnsure protection against electric shock by an appropriate enclosure.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified personal and when no voltage is applied.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeater PS: connect power supply terminals L and N to mains voltage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Repeater PS please pay attention to the polarity of the output voltage marked on the housing (DA+, DA-).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line may be installed within the same cable or as single conductors within the same tube as mains supply.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line must not be connected to the mains or other SELV systems.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300070813952,"sku":"86458401","price":269.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Capturadepantalla2024-01-27alas18.39.03.png?v=1751922363"},{"product_id":"dali-repeater-mit-ps-200ma-din-rail","title":"DALI Repeater mit PS 200mA  DIN Rail","description":"\u003cp\u003eTransceiver for DALI line extension, 1 x DALI PS output 200mA, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Repeater is intended for remote installation in the ceiling or in an enclosure, ensure proper cable relief for installation in protection class II devices.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI Repeater HS-type is suited for DIN rail mounting.\u003c\/li\u003e\n\u003cli\u003eEnsure protection against electric shock by an appropriate enclosure.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified personal and when no voltage is applied.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeater PS: connect power supply terminals L and N to mains voltage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor Repeater PS please pay attention to the polarity of the output voltage marked on the housing (DA+, DA-).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line may be installed within the same cable or as single conductors within the same tube as mains supply.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-line must not be connected to the mains or other SELV systems.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"DIN Rail","offer_id":49035304534272,"sku":"86458401-PS-HS","price":385.92,"currency_code":"USD","in_stock":true},{"title":"DE Ceiling","offer_id":49035304567040,"sku":"86458401-PS","price":385.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86458401-PS-HS-DALI-Repeater-PS-HS-1-1024x605.jpg?v=1751922362"},{"product_id":"dali-4net","title":"DALI 4Net","description":"\u003cp\u003eDALI interface and controller for 4 DALI lines with Ethernet for Cockpit SW and Modbus access, Real Time Clock_x000B_Central Scheduling Crossline functions, Circadian daylight schedule, Emergency function\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply voltage 24VDC (typ. current consumption 90mA)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 DALI-outputs (DA0 … DA3) for connecting 4 DALI circuits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor the supply of the DALI-lines proper DALI power supplies (e.g. DALI PS) are required\u003cbr\u003e\u003cstrong\u003eNetwork Settings, Date \u0026amp; Time\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAfter Starting the Cockpit, the interface can be selected via the bus server menu (Menu: “DALI-Bus” -\u0026gt; “Bus Interface…”).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSelect Ethernet -\u0026gt; Lunatone TCP and enter IP of the device.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlternatively, the network can be scanned for devices (search-function).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI4Net is delivered with the following default network settings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"DALI 4Net","offer_id":49035291066624,"sku":"22176666","price":1843.2,"currency_code":"USD","in_stock":true},{"title":"DALI 4Net Basic","offer_id":49035291099392,"sku":"22176666-B","price":994.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-4NET-22176666-and-4NET-Basic-1.jpg?v=1751922362"},{"product_id":"dali-usb","title":"DALI USB","description":"\u003cp\u003e\u003cspan\u003eThe DALI USB is used as interface between the DALI Cockpit PC Software and the devices on the DALI bus. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt enables the addressing and configuration of DALI installations. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DALI USB is available in 6 different versions: with strain relief, for DIN Rail (with or without flash memory), for flush-type installation boxes (with or without integrated 30mA bus supply), or as a wireless wDALI module.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSpecification\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe DALI USB module is supplied by the DALIline (current consumption ~6mA) as well as by USB (current consumption 10mA\/40mA max).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DALI-line and the USB are galvanically isolated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connection to the DALI-line is polarity free and protected against overvoltage of up to 270Vac.\u003c\/span\u003e\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300071174400,"sku":"24138923","price":334.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24138923-DALI-USB-1024x606.jpg?v=1751922361"},{"product_id":"dali-usb-mini","title":"DALI USB MINI","description":"\u003cp\u003eDALI USB MINI interface for DALI Cockpit SW Tool, compact housing\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the DALI-2 USB without included buspower supply an external DALI bu power supply is required.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in a voltage-free state of the system and by qualified specialists.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNational regulations for setting up electrical systems must be followed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-2 USB 30mA: the polarity of the output voltage is marked on the housing (DA+, DA-).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-2 USB: the connection to the DALI terminals can be made regardless of the polarity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300071403776,"sku":"24138923-DO","price":370.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24138923-30-DALI-USB-30mA-1-1024x606_11843d07-e9f6-469f-82b9-89737276c3b0.jpg?v=1751922360"},{"product_id":"dali-usb-30ma","title":"DALI USB 30mA","description":"\u003cp\u003eDALI USB interface for DALI Cockpit SW Tool with optional PS 30mA from USB\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe DALI USB module is supplied by the DALIline (current consumption ~6mA) as well as by USB (current consumption 10mA\/40mA max).\u003c\/p\u003e\n\u003cp\u003eThe DALI-line and the USB are galvanically isolated.\u003c\/p\u003e\n\u003cp\u003e The connection to the DALI-line is polarity free and protected against overvoltage of up to 270Vac\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300071436544,"sku":"24138923-30","price":414.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24138923-30-DALI-USB-30mA-1-1024x606.jpg?v=1751922359"},{"product_id":"dali-usb-din-rail","title":"DALI USB DIN Rail","description":"\u003cp\u003eDALI USB interface for DALI Cockpit SW Tool, DIN rail version\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor the DALI-2 USB without included buspower supply an external DALI bus power supply is required.\u003c\/li\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in a voltage-free state of the system and by qualified specialists.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNational regulations for setting up electrical systems must be followed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-2 USB 30mA: the polarity of the output voltage is marked on the housing (DA+, DA-).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-2 USB: the connection to the DALI terminals can be made regardless of the polarity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300071469312,"sku":"24138923-HS","price":370.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24138923-HS-DALI-USB-HS-1024x605.jpg?v=1751922359"},{"product_id":"dali-2-sci-rs232-din-rail","title":"DALI-2 SCI RS232 DIN Rail","description":"\u003cp\u003eRS232 to DALI-2 Interface, screw terminal and RJ45, DIN rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI-2 SCI RS232 is connected to the DALI-line. A typical value for the current consumption is 10mA.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarityfree.\u003c\/li\u003e\n\u003cli\u003eFor easy installation, each DALI-terminalis executed as double clamp (linked contacts are marked on the housing).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWith the test button on the device (Art.Nr.: 24166096-LU-HS) the wiring of the DALI system can be checked.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressing the test button all luminaires connected to the DALI system will be controlled:\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShort press: the LED on the device is flashing and a test sequence (on, off, dimming) is started\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLong press: ON – 100%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecond press: OFF and the test mode is ended \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300071665920,"sku":"22176438-HS","price":264.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-SCI-RS232-HS-22176438-HS.jpg?v=1751922358"},{"product_id":"dali-switch-cross-white","title":"DALI Switch Cross white","description":"\u003cp\u003eConfigurable 4 button switch plate white, various functions \/ macros, RAL9010\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Switch is intended for mounting on a conduit box or on a cavity wall, hence protection against contacting the terminals and electric shock is provided\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003c\/li\u003e\n\u003cli\u003eThe DALI Switch is powered by the DALIline – no separate power supply needed\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free\u003c\/li\u003e\n\u003cli\u003e DALI-line wiring with standard low voltage installation material\u003c\/li\u003e\n\u003cli\u003eThe DALI-interface can handle mains voltage, protecting the device in case of wrong wiring\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring topology of the DALI-line: Line, Tree, Star\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect only one wire on each terminal, if twin ferrules are used take care to the maximum wire size\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"White RAL9010","offer_id":49035304435968,"sku":"86459793-W","price":161.28,"currency_code":"USD","in_stock":true},{"title":"White RAL9016","offer_id":49035304468736,"sku":"86459793-W16","price":161.28,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49035304501504,"sku":"86459793-B","price":161.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86459793-_-NFC-_-DALI-2-Switch-Cross-NFC-all-colours-1536x991.jpg?v=1751922357"},{"product_id":"dali-touchpanel-02","title":"DALI Touchpanel 02","description":"\u003cp\u003eConfigurable Touchpanel, up to 12 buttons, various functions, changeable layouts\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Touch is connected directly to th DALI-line.\u003c\/li\u003e\n\u003cli\u003eThe current consumption is about 4mA.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI Touch can be mounted on a installation box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAddressing and Configuration\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWith the help of a DALI-USB interface the DALI Touch can be configured with the DALICockpit software tool.\u003c\/li\u003e\n\u003cli\u003eThe interface is only required for installation and can be removed afterwards.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDuring the installation process a user action is required for device identification.\u003c\/li\u003e\n\u003cli\u003ePlease double-click the touchscreen on request.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072059136,"sku":"24035465","price":381.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-DALI-Touchpanel-Front-2016-1024x605.jpg?v=1751922356"},{"product_id":"dali-touchpanel-02-bluetooth-4-0","title":"DALI Touchpanel 02 Bluetooth 4.0","description":"\u003cp\u003eDALI Touchpanel 02 + additional Bluetooth interface for smartphone app, various functions, changeable layouts\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI Touchpanel BT is supplied directly via the DALI signal line by the DALI line power supply (current consumption \u0026lt;4 mA).\u003c\/li\u003e\n\u003cli\u003eThe connection is polarity-free and protected against overvoltage (mains).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI Touch BT can be easily mounted on an installation box \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAddressing and Configuration\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWith the help of a DALI USB interface and the DALI-Cockpit software tool the module can be configured easily.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDuring addressing the module is detected and listed in the component tree.\u003c\/li\u003e\n\u003cli\u003eThe free DALI Cockpit software tool can be downloaded from the Lunatone website and can be used for commissioning for DALI ballasts as well as for the DALI Touch BT control device.\u003c\/li\u003e\n\u003cli\u003eDALICockpit and DALI-USB interface are not required for standard operation and can be removed after installation is finished.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072091904,"sku":"24035465-BT","price":444.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Touchpanel_Sender-Reciever-600x387.jpg?v=1751922355"},{"product_id":"rtc-din-rail","title":"RTC DIN Rail","description":"\u003cp\u003eTimer module, 14 commands, weekday, summer- \/ winter time, astro function, DIN rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI RTC Timer is intended for back box installation or integration in protection class II devices, the HS-type is suited for DIN rail mounting, ensure\u003cbr\u003eprotection against electric shock by an appropriate enclosure\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI RTC Timer is powered by the DALI line (typical current consumption 5 mA), no separate power supply needed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-line wiring with standard low voltage installation material\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-interface can handle mains voltage, protecting the device in case of wrong wiring\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring topology of the DALI-line: Line, Tree, Star\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect only one wire on each terminal, if twin ferrules are used take care to the maximum wire size\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072124672,"sku":"86459531-HS","price":243.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86459531-HS-RTC-Timer-HS-1024x605.jpg?v=1751922354"},{"product_id":"dali-cdc","title":"DALI CDC","description":"\u003cp\u003eAutomatic colour temperature day curve for DT8 luminaires (circadian), scene behaviour configurable\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI CDC is intended for back bo installation or integration in protectio class II devices, the HS-type is suited for DIN rail mounting, ensure protection against electric shock by an appropriate enclosure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI CDC is powered by the DALI line (typical current consumption 5 mA), no separate power supply needed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-line wiring withstandard low voltage installation material\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-interface can handle mains voltage, protecting the device in case of wrong wiring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072157440,"sku":"89453853","price":279.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-89453853-HS-DALI-CDC-HS-1.jpg?v=1751922353"},{"product_id":"dali-cdc-din-rail","title":"DALI CDC DIN Rail","description":"\u003cp\u003eAutomatic colour temperature day curve for DT8 luminaires (circadian), scene behaviour configurable, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI CDC is intended for back bo installation or integration in protection class II devices, the HS-type is suited for DIN rail mounting, ensure protection against electric shock by an appropriate enclosure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring as fixed installation in a dry and clean environment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstallation only by qualified person when no voltage is applied\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAttend regulations regarding electrical installations of national authorities\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI CDC is powered by the DALI line (typical current consumption 5 mA), no separate power supply needed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDALI-line wiring withstandard low voltage installation material\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI-interface can handle mains voltage, protecting the device in case of wrong wiring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072386816,"sku":"89453853-HS","price":279.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-89453853-HS-DALI-CDC-HS-1_c5a5bb05-ba0c-4c8b-9d0f-7a36ecc46b7f.jpg?v=1751922352"},{"product_id":"dali-mc4l","title":"DALI MC4L","description":"\u003cp\u003ePush Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI MC4L is designed for back box installation or integration in protection class II devices, with proper cable relief required for installation. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI MC4L-HS is suitable for DIN rail mounting, ensuring protection against electric shock with an appropriate enclosure.\u003c\/li\u003e\n\u003cli\u003eWiring must be a fixed installation in a dry, clean environment, performed only by qualified personnel when no voltage is applied.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNational electrical installation regulations must be followed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI MC4L\/MC4L-HS is powered by the DALI line, eliminating the need for a separate power supply, and the connection to the DALI line is polarity-free.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI line should be wired using standard low voltage installation materials and can handle mains voltage, protecting the device from incorrect wiring.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe DALI line's wiring topology can be configured as a line, tree, or star. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSwitching inputs are designed for use with line voltage and are galvanically separated from the DALI line.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine voltage must be appropriately fused based on the wire size, with only one wire per terminal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072714496,"sku":"86458507-4L","price":131.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86458507-4L-HS-2-DALI-2-MC4L-HS_LT2_Logo.jpg?v=1751922350"},{"product_id":"dali-mc4l-din-rail","title":"DALI MC4L DIN Rail","description":"\u003cp\u003ePush Button Coupler, input 4 x 230V (10m), flexible configurable, sequencer, macros, DT8, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI MC4L is designed for back box installation or integration in protection class II devices, with proper cable relief required for installation. \u003c\/li\u003e\n\u003cli\u003eThe DALI MC4L-HS is suitable for DIN rail mounting, ensuring protection against electric shock with an appropriate enclosure.\u003c\/li\u003e\n\u003cli\u003eWiring must be a fixed installation in a dry, clean environment, performed only by qualified personnel when no voltage is applied.\u003c\/li\u003e\n\u003cli\u003eNational electrical installation regulations must be followed.\u003c\/li\u003e\n\u003cli\u003eThe DALI MC4L\/MC4L-HS is powered by the DALI line, eliminating the need for a separate power supply, and the connection to the DALI line is polarity-free.\u003c\/li\u003e\n\u003cli\u003eThe DALI line should be wired using standard low voltage installation materials and can handle mains voltage, protecting the device from incorrect wiring.\u003c\/li\u003e\n\u003cli\u003eThe DALI line's wiring topology can be configured as a line, tree, or star. \u003c\/li\u003e\n\u003cli\u003eSwitching inputs are designed for use with line voltage and are galvanically separated from the DALI line.\u003c\/li\u003e\n\u003cli\u003eLine voltage must be appropriately fused based on the wire size, with only one wire per terminal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072747264,"sku":"86458507-4LHS","price":126.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86458507-4L-DALI-MC4L-UL-1024x606.jpg?v=1751922349"},{"product_id":"dali-mc-0-10v","title":"DALI MC+","description":"\u003cp\u003eDALI control module with four GP-inputs for pushbutton switches and potentiometers\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact DALI control unit with 4 general purpose inputs\u003c\/li\u003e\n\u003cli\u003eEach input can be configured for digital or analog input signals\u003c\/li\u003e\n\u003cli\u003eMomentary switches or 100kΩ potentiometers are connected directly to the DALI MC+ destination address, switching mode and DALI-commands can be assigned\u003cbr\u003eto each input\u003c\/li\u003e\n\u003cli\u003eDALI DT8 support for adjustable white luminaires with the help of special\u003cbr\u003emacros\u003c\/li\u003e\n\u003cli\u003eFor potentiometer use the input signal is converted directly into a DALI arc power level. The conversion can be triggered periodically or by a\u003cbr\u003epredefined event.\u003c\/li\u003e\n\u003cli\u003eA switching action or a change in the input voltage signal (\u0026gt;2%) can be\u003cbr\u003eselected as trigger event for the conversion.\u003c\/li\u003e\n\u003cli\u003eAdjustable „power-up“-function the function of the switching input can be configured with the help of the DALI Cockpit and a DALI USB interface\u003c\/li\u003e\n\u003cli\u003eMulti-master capability, several modules can be installed on the same\u003cbr\u003eDALI-line\u003c\/li\u003e\n\u003cli\u003eDuitable for installation in protection class II devices or back box installation\u003c\/li\u003e\n\u003cli\u003eThe DALI MC+ is supplied directly via the DALI signal line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: This product is delivered with no individual packaging for less than 10 units ordered.\u003c\/em\u003e\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300072812800,"sku":"86459532","price":84.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-MC.jpg?v=1751922348"},{"product_id":"0-10v-dali-din-rail-30ma-dali-ps","title":"0-10V DALI Din Rail, 30mA DALI PS","description":"\u003cp\u003eConverter 0-10V (active\/passive)to DALI (30mA), configurable 0.1%-100%\/1%-100%\/10%-100%\/\u0026lt;1V, 12-24V supply, DIN rail, with DALI PS 30mA\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe input voltage range of 1V-10V is converted to the light level range of the connected DALI ballast.\u003c\/li\u003e\n\u003cli\u003eThe input voltage is converted to either 1%-100% or 10% -100% light level\u003c\/li\u003e\n\u003cli\u003eFor a better visualisation only the \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003echaracteristics of the 10% types are \u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eshown on the left.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eON\/OFF\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAs behaviour below 1V the device can either switch OFF (red) or send the minimum level (blue).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073042176,"sku":"86468352-HS","price":86.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/0-10V-DALI-30mA-86468352-HS-UL.jpg?v=1751922347"},{"product_id":"1x0-10v-dali-hs-1ch-dt6","title":"0-10V to DALI Converter DIN Rail – Multi-Channel DT6","description":"\u003cp\u003eConverter 1x 0-10V to DALI, configurable 0.1%-100%, 1%-100%, 10%-100%, configurable \u0026lt;1V, 12-24V supply\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply: 12V-24V DC (e.g.. 24V\/300mA Art.Nr.: 24166012-24HS)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGalvanic isolation between DALI and 0-10V input \/ supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe 0-10V input voltage has same potential as the supply voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line is polarity free, the DALI-line is powered by an external DALI power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eConversion Characteristic\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eThe input voltage in the range of 1V-10V i converted into DALI dimming levels.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe figure above shows the characteristics for the different dimming levels (0.1% - 100%, 1% -100%, 3% -100%, 10% -100%).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe light values in % are to be seen in connection with a DALI control gear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"1 Channel","offer_id":49035295129856,"sku":"86468353-1-HS","price":126.72,"currency_code":"USD","in_stock":true},{"title":"2 Channels","offer_id":49035295162624,"sku":"86468353-2-HS","price":152.64,"currency_code":"USD","in_stock":true},{"title":"3 Channels","offer_id":49035295195392,"sku":"86468353-3-HS","price":175.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-0-10V-Dali-86468353-x-HS-1-1536x908.jpg?v=1751922346"},{"product_id":"dali-0-10v-analog-galv-getrennt","title":"DALI 0-10V Converter","description":"\u003cp\u003eConverter DALI to 1-10V 1mA, elec. Isolated, DALI supplied, built in\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 0-10V module is based on the standard for DALI control gear (IEC 62386-102) and device type 5 extension (IEC 62386-206).\u003c\/li\u003e\n\u003cli\u003eWith few exceptions the entire instruction set defined by the DALI standard is supported.\u003c\/li\u003e\n\u003cli\u003eFor changing dimming curve DALI commands for device type 5 are implemented.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCommands and functions referring to the SYSTEM FAILURE LEVEL are not supported.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis parameter is used as the dim level that should be applied on the output in case of a DALI line outage.\u003c\/li\u003e\n\u003cli\u003eSince the DALI 0-10V is a bus powered device there is no possibility to apply a specific predefined signal on the output without being under power. \u003c\/li\u003e\n\u003cli\u003eIn the case of a DALI-line outage 100% are applied on the output.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eAuto Calibration Mode\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOn power up the DALI 0-10V converter is evaluating if the calibration values for the output values are still correct or if a recalibration is required. \u003c\/li\u003e\n\u003cli\u003eA calibration will last up to 2 minutes.\u003c\/li\u003e\n\u003cli\u003eThe auto calibration routine can be deactivated and manually triggered via DALI-Cockpit software tool.\u003c\/li\u003e\n\u003cli\u003eDuring the calibration the device does not react to any dimming commands. \u003c\/li\u003e\n\u003cli\u003eThe DALI Cockpit provides information if the device is in normal operation or if the auto calibration is running.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Analog Isolated","offer_id":49035295228160,"sku":"86458508-AN","price":59.04,"currency_code":"USD","in_stock":true},{"title":"Analog LE","offer_id":49035295260928,"sku":"86458508-LE","price":50.4,"currency_code":"USD","in_stock":true},{"title":"PWM 100mA","offer_id":49035295293696,"sku":"86458508-100","price":82.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-0-10V-AN-86458508-AN-1024x550.jpg?v=1751922344"},{"product_id":"dali-0-10v-pwm-1ma-galv-getrennt","title":"DALI 0-10V PWM 1mA galv. getrennt","description":"\u003cp\u003eConverter DALI to 0-10V PWM 1mA, lin\/log, elec. Isolated, built in\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe interface is supplied directly via the DALI signal line.\u003c\/li\u003e\n\u003cli\u003eIt must not be connected to the mains.\u003c\/li\u003e\n\u003cli\u003eA typical value of the current consumption is approximately 3.1 mA.\u003c\/li\u003e\n\u003cli\u003eFor supplying components on a DALI line the installation of a DALI power supply (DALI PS) is necessary.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI line is polarity free.\u003c\/li\u003e\n\u003cli\u003eInternally the DALI-terminals are connected through as visualized on the housing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe PWM output supports sinking currents up to 1mA.\u003c\/li\u003e\n\u003cli\u003eThe terminals allow cross sections of the connection wire from 0.5 to 1.5 mm2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFunction\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 0-10V PWM interface converts the desired DALI dim level in a corresponding PWM-pattern.\u003c\/li\u003e\n\u003cli\u003eUp from firmware 2.0 DALI device type 5 is supported.\u003c\/li\u003e\n\u003cli\u003eThis allows the selection of the control characteristic with respect to output range (0-10V\/1-10V) and dimming curve (linear\/logarithmic). \u003c\/li\u003e\n\u003cli\u003eThe relationship is clearly presented by the control characteristic diagram.\u003c\/li\u003e\n\u003cli\u003eThe maximum output current is 1mA (current sink).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073599232,"sku":"86458508-PWM","price":54.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-0-10V-PWM-86458508-PWM.jpg?v=1751922344"},{"product_id":"dali-2-rm8","title":"DALI-2 RM8","description":"\u003cp\u003eDALI-2 Relay, 8A permanent, 80A Inrush, normally open, DALI supplied, built in\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe relay module is powered directly by the DALI line and must not be connected to the mains.\u003c\/li\u003e\n\u003cli\u003eIt typically consumes 2.7mA, requiring a DALI power supply (DALI PS) for operation.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI line is polarity-free, and the DALI input is protected  against overvoltage up to 250VAC.\u003c\/li\u003e\n\u003cli\u003eFor RM8\/16 and RM16-DE types, the DALI terminals are connected through internally as shown on the housing.\u003c\/li\u003e\n\u003cli\u003eThe RM8\/16 relay output supports loads up to 2000VA and switching currents up to 16A, depending on the type.\u003c\/li\u003e\n\u003cli\u003eTo prevent the load current from exceeding the relay’s maximum switching current, an appropriate automatic circuit breaker must be installed.\u003c\/li\u003e\n\u003cli\u003eSwitching occurs at the zero-crossing of AC voltage.\u003c\/li\u003e\n\u003cli\u003eThe RM16 DE (Art.Nr.: 86458629-DE) and RM16 HS (Art.Nr.: 86458629-HS) types feature an integrated current limiter, making them ideal for loads with high inrush current over 100A.\u003c\/li\u003e\n\u003cli\u003eThe DALI-2 versions (art.nr.: 86456944-_ and art.nr.: 86456203-_) are functionally identical to the original DALI variants but include DALI-2 certification and the \"Identify\" function for enhanced configuration and addressing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Standard","offer_id":49035055038720,"sku":"86456944","price":126.72,"currency_code":"USD","in_stock":true},{"title":"WE Changeover","offer_id":49035055071488,"sku":"86456944-WE","price":135.36,"currency_code":"USD","in_stock":true},{"title":"DIN Rail","offer_id":49035055104256,"sku":"86456944-HS","price":109.44,"currency_code":"USD","in_stock":true},{"title":"DIN Rail WE","offer_id":49035055137024,"sku":"86456944-HS-WE","price":142.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/86456944-DALI-2-RM8-Logo.jpg?v=1751922343"},{"product_id":"dali-4ch-rc-hs","title":"DALI 4Ch RC HS","description":"\u003cp\u003e4 DALI addresses to DC Digital output \/ pilot relay, DALI DT7, 12-48, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe DALI 4Ch RC offers 4 independent channels, of which each channel can be individually controlled via DALI. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHence loads can be switched on and off.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSince each channel provides an integrated free-wheeling circuit, the module is suitable for inductive loads like coils of relays and circuit breakers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEach channel of the DALI 4Ch RC acts like a standard DALI ballast for non dimmable loads.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt is based on the DALI specification for control gear (IEC 62386-102) and the device type 7 extension (IEC 62386-208). \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTherefore the switching characteristic is determined by the comparison of the virtual direct arc power level (VDAP) with 4 thresholds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe virtual dim level (VDAP) is like the dim level of DALI-ballasts and is therefore limited by MINLEVEL and MAXLEVEL and influenced by fade-time and fade-rate.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor each dim direction 2 thresholds can be defined. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThey are compared with the virtual dim level and as a result the output is switched on or off.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073894144,"sku":"89453860-HS","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-89453860-DE-and-89453860-HS-DALI-2-4Ch-RC.jpg?v=1751922342"},{"product_id":"dali-pd-10-300w-ab-anschnitt-r-l-c","title":"DALI PD 10-300W ab\/anschnitt R,L,C","description":"\u003cp\u003eDALI phase dimmer 10-300W (resistive load), leading\/trailing edge R,L,C DIN rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe DALI PD300 is suitable for integration in protection class II devices, ensuring proper cable relief during installation.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt serves as an independent control gear, ideal for remote ceiling installations and integration into luminaires.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen built into protection class II devices, cable relief must be properly maintained.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe DALI PD300 (HS-type) is also designed for DIN rail mounting, requiring protective enclosures to prevent shock hazards.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWiring should be done as a permanent installation in a dry, clean environment.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnly qualified specialists should handle the installation, and the system must be voltage-free during installation or when replacing luminaires.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e All national regulations for setting up electrical systems must be followed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnect the power supply terminals L and N to mains voltage as labeled, and attach terminals L' and N, or the terminal with the light bulb symbol, to the load.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnsure that the wiring length to the load does not exceed 50 meters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOnly connect luminaires that fall within the rated power range of the dimmer and are compatible with the load type.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePay special attention to the power factor of luminaires, especially for lamps with a rated power below 25W.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073926912,"sku":"86458619-300U-HS","price":201.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-DALI-2-PD-300W-02-1024x606.jpg?v=1751922341"},{"product_id":"dali-pd-10-300w-anschnitt-r-l","title":"DALI PD 10-300W anschnitt R,L","description":"\u003cp\u003eDALI phase dimmer 10-300W (resistive load), leading edge R,L, DALI Supplied\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI PD300 is suitable for integration in protection class II devices, ensuring proper cable relief during installation.\u003c\/li\u003e\n\u003cli\u003eIt serves as an independent control gear, ideal for remote ceiling installations and integration into luminaires.\u003c\/li\u003e\n\u003cli\u003eWhen built into protection class II devices, cable relief must be properly maintained.\u003c\/li\u003e\n\u003cli\u003eThe DALI PD300 (HS-type) is also designed for DIN rail mounting, requiring protective enclosures to prevent shock hazards.\u003c\/li\u003e\n\u003cli\u003eWiring should be done as a permanent installation in a dry, clean environment.\u003c\/li\u003e\n\u003cli\u003eOnly qualified specialists should handle the installation, and the system must be voltage-free during installation or when replacing luminaires.\u003c\/li\u003e\n\u003cli\u003eAll national regulations for setting up electrical systems must be followed.\u003c\/li\u003e\n\u003cli\u003eConnect the power supply terminals L and N to mains voltage as labeled, and attach terminals L' and N, or the terminal with the light bulb symbol, to the load.\u003c\/li\u003e\n\u003cli\u003eEnsure that the wiring length to the load does not exceed 50 meters.\u003c\/li\u003e\n\u003cli\u003eOnly connect luminaires that fall within the rated power range of the dimmer and are compatible with the load type.\u003c\/li\u003e\n\u003cli\u003ePay special attention to the power factor of luminaires, especially for lamps with a rated power below 25W.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300073959680,"sku":"86458618-300","price":197.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-DALI-2-PD-300W-02.jpg?v=1751922341"},{"product_id":"dali-pd-3-25w-ab-anschnitt-r-l-c","title":"DALI PD 3-25W ab\/anschnitt R,L,C","description":"\u003cp\u003eDALI phase dimmer 3-25W (resistive load) leading\/trailing edge R,L,C DALI Supplied\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI PD300 is suitable for integration in protection class II devices, ensuring proper cable relief during installation.\u003c\/li\u003e\n\u003cli\u003eIt serves as an independent control gear, ideal for remote ceiling installations and integration into luminaires.\u003c\/li\u003e\n\u003cli\u003eWhen built into protection class II devices, cable relief must be properly maintained.\u003c\/li\u003e\n\u003cli\u003eThe DALI PD300 (HS-type) is also designed for DIN rail mounting, requiring protective enclosures to prevent shock hazards.\u003c\/li\u003e\n\u003cli\u003eWiring should be done as a permanent installation in a dry, clean environment.\u003c\/li\u003e\n\u003cli\u003eOnly qualified specialists should handle the installation, and the system must be voltage-free during installation or when replacing luminaires.\u003c\/li\u003e\n\u003cli\u003e All national regulations for setting up electrical systems must be followed.\u003c\/li\u003e\n\u003cli\u003eConnect the power supply terminals L and N to mains voltage as labeled, and attach terminals L' and N, or the terminal with the light bulb symbol, to the load.\u003c\/li\u003e\n\u003cli\u003eEnsure that the wiring length to the load does not exceed 50 meters.\u003c\/li\u003e\n\u003cli\u003eOnly connect luminaires that fall within the rated power range of the dimmer and are compatible with the load type.\u003c\/li\u003e\n\u003cli\u003e Pay special attention to the power factor of luminaires, especially for lamps with a rated power below 25W.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074189056,"sku":"86458619-25U","price":125.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-DALI-2-PD-3-25W-ab_anschnitt-R_L_C-logo-02.jpg?v=1751922340"},{"product_id":"dali-1ch-led-dimmer-16a","title":"DALI 1Ch LED Dimmer 16A","description":"\u003cp\u003eDALI 1Ch LED constant voltage PWM 16A, Uin 12-48V, Sw\u0026amp;Dim\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThe device's output is controlled via its DALI address (Device Type 6).\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAlternatively, it can be managed through one or two switch inputs:\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eSw\u0026amp;Dim: Controls light level. A short press toggles On\/Off, while a long press adjusts dimming.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eSwitchDim2: Offers scene selection with a short press (see Table 1, page 9).\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003ePressing the SwD1 input for 2 minutes activates the \"corridor function,\" which remains active until the device is power cycled (defaulting to standard SwitchDim mode on power up).\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eHolding SwD1 for over 30 seconds allows synchronization of multiple devices in Sw\u0026amp;Dim mode.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eCorridor Function (from FW 4.0):\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThis mode provides a staircase function, allowing control via motion sensors.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eWhen activated, the LED output switches to maximum level.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAfter a defined hold-time, it transitions to a second light level for a set period before returning to the base level. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074254592,"sku":"89453829","price":125.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-1Ch-CV-DT6_2022-1024x606.jpg?v=1751922339"},{"product_id":"dali-1ch-led-dimmer-16a-dinrail","title":"DALI 1Ch LED Dimmer 16A DinRail","description":"\u003cp\u003eDALI 1Ch LED constant voltage PWM 16A, Uin 12-48V, Sw\u0026amp;Dim, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device's output is controlled via its DALI address (Device Type 6).\u003c\/li\u003e\n\u003cli\u003eAlternatively, it can be managed through one or two switch inputs:\u003c\/li\u003e\n\u003cli\u003eSw\u0026amp;Dim: Controls light level. A short press toggles On\/Off, while a long press adjusts dimming.\u003c\/li\u003e\n\u003cli\u003eSwitchDim2: Offers scene selection with a short press (see Table 1, page 9).\u003c\/li\u003e\n\u003cli\u003ePressing the SwD1 input for 2 minutes activates the \"corridor function,\" which remains active until the device is power cycled (defaulting to standard SwitchDim mode on power up).\u003c\/li\u003e\n\u003cli\u003eHolding SwD1 for over 30 seconds allows synchronization of multiple devices in Sw\u0026amp;Dim mode.\u003c\/li\u003e\n\u003cli\u003eCorridor Function (from FW 4.0):\u003c\/li\u003e\n\u003cli\u003eThis mode provides a staircase function, allowing control via motion sensors.\u003c\/li\u003e\n\u003cli\u003eWhen activated, the LED output switches to maximum level.\u003c\/li\u003e\n\u003cli\u003eAfter a defined hold-time, it transitions to a second light level for a set period before returning to the base level. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074352896,"sku":"89453829-HS","price":125.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-1Ch-CV-DT6_2022-1024x606_4b50744f-be03-4b7c-bda1-a584bdebeee7.jpg?v=1751922339"},{"product_id":"dali-2ch-led-dimmer-16a","title":"DALI 2Ch LED Dimmer 16A","description":"\u003cp\u003eDALI 2Ch LED constant voltage PWM 16A, Uin 12-48V, SwitchDim2, dim2warm, balance\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device offers two operating modes: DT6 and Colour\u0026amp;Dim.\u003c\/li\u003e\n\u003cli\u003eDT6 (Factory Default): Each channel is controlled via its own DALI address (Device Type 6).\u003c\/li\u003e\n\u003cli\u003e Alternatively, it can be managed with two switch inputs for mains voltage (SwitchDim2):\u003c\/li\u003e\n\u003cli\u003eSwD1: Controls light level (short press for On\/Off, long press for dimming).\u003c\/li\u003e\n\u003cli\u003eSwD2: Scene selector (short press to select pre-set scenes).\u003c\/li\u003e\n\u003cli\u003eFrom firmware version 4.6, the dimmer supports DALI 2 commands and is compatible with DALI 2 standards.\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim: Designed for RGB luminaires, using two DALI addresses—one for light level and one for color distribution.\u003c\/li\u003e\n\u003cli\u003eThis mode allows independent adjustment of color and light level.\u003c\/li\u003e\n\u003cli\u003eIt supports standard DALI commands like dim up\/down and DAP, making it compatible with common controls and gateways (e.g., KNX).\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim mode serves as an alternative to the DT8-RGBWAF device.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074549504,"sku":"89453830","price":129.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-2Ch-CV-DT6_2022.jpg?v=1751922338"},{"product_id":"dali-2ch-led-dimmer-16a-din-rail","title":"DALI 2Ch LED Dimmer 16A DIN Rail","description":"\u003cul\u003e\n\u003cli\u003eDALI 2Ch LED constant voltage PWM 16A, Uin 12-48V, SwitchDim2, dim2warm, balance\u0026amp;DIM, DIN Rail\u003c\/li\u003e\n\u003cli\u003eThe device offers two operating modes: DT6 and Colour\u0026amp;Dim.\u003c\/li\u003e\n\u003cli\u003eDT6 (Factory Default): Each channel is controlled via its own DALI address (Device Type 6).\u003c\/li\u003e\n\u003cli\u003eAlternatively, it can be managed with two switch inputs for mains voltage (SwitchDim2):\u003c\/li\u003e\n\u003cli\u003eSwD1: Controls light level (short press for On\/Off, long press for dimming).\u003c\/li\u003e\n\u003cli\u003eSwD2: Scene selector (short press to select pre-set scenes.\u003c\/li\u003e\n\u003cli\u003eFrom firmware version 4.6, the dimmer supports DALI 2 commands and is compatible with DALI 2 standards.\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim: Designed for RGB luminaires, using two DALI addresses—one for light level and one for color distribution.\u003c\/li\u003e\n\u003cli\u003eThis mode allows independent adjustment of color and light level.\u003c\/li\u003e\n\u003cli\u003eIt supports standard DALI commands like dim up\/down and DAP, making it compatible with common controls and gateways (e.g., KNX).\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim mode serves as an alternative to the DT8-RGBWAF device.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074811648,"sku":"89453830-HS","price":129.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-2Ch-CV-DT6_2022_b2c910b0-fb2a-4b46-8674-6e7fc00c8955.jpg?v=1751922337"},{"product_id":"dali-3ch-led-dimmer-16a","title":"DALI 3Ch LED Dimmer 16A","description":"\u003cp\u003eDALI 3Ch LED constant voltage PWM 16A,Uin 12-48V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device offers two operating modes: DT6 and Colour\u0026amp;Dim.\u003c\/li\u003e\n\u003cli\u003eDT6 (Factory Default): Each channel is controlled via its own DALI address (Device Type 6).\u003c\/li\u003e\n\u003cli\u003eAlternatively, it can be managed with two switch inputs for mains voltage (SwitchDim2):\u003c\/li\u003e\n\u003cli\u003eSwD1: Controls light level (short press for On\/Off, long press for dimming).\u003c\/li\u003e\n\u003cli\u003eSwD2: Scene selector (short press to select pre-set scenes).\u003c\/li\u003e\n\u003cli\u003eFrom firmware version 4.6, the dimmer supports DALI 2 commands and is compatible with DALI 2 standards.\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim: Designed for RGB luminaires, using two DALI addresses—one for light level and one for color distribution.\u003c\/li\u003e\n\u003cli\u003eThis mode allows independent adjustment of color and light level.\u003c\/li\u003e\n\u003cli\u003eIt supports standard DALI commands like dim up\/down and DAP, making it compatible with common controls and gateways (e.g., KNX). Colour\u0026amp;Dim mode serves as an alternative to the DT8-RGBWAF device.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300074877184,"sku":"89453831","price":138.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-3Ch-CV-DT6_2020.jpg?v=1751922337"},{"product_id":"dali-3ch-led-dimmer-16a-din-rail","title":"DALI 3Ch LED Dimmer 16A DIN rail","description":"\u003cp\u003eDALI 3Ch LED constant voltage PWM 16A,Uin 12-48V, SwitchDim2, colour\u0026amp;DIM, DIN Rail\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe device offers two operating modes: DT6 and Colour\u0026amp;Dim.\u003c\/li\u003e\n\u003cli\u003eDT6 (Factory Default): Each channel is controlled via its own DALI address (Device Type 6).\u003c\/li\u003e\n\u003cli\u003eAlternatively, it can be managed with two switch inputs for mains voltage (SwitchDim2):\u003c\/li\u003e\n\u003cli\u003eSwD1: Controls light level (short press for On\/Off, long press for dimming).\u003c\/li\u003e\n\u003cli\u003eSwD2: Scene selector (short press to select pre-set scenes.\u003c\/li\u003e\n\u003cli\u003eFrom firmware version 4.6, the dimmer supports DALI 2 commands and is compatible with DALI 2 standards.\u003c\/li\u003e\n\u003cli\u003eColour\u0026amp;Dim: Designed for RGB luminaires, using two DALI addresses—one for light level and one for color distribution.\u003c\/li\u003e\n\u003cli\u003eThis mode allows independent adjustment of color and light level.\u003c\/li\u003e\n\u003cli\u003eIt supports standard DALI commands like dim up\/down and DAP, making it compatible with common controls and gateways (e.g., KNX). Colour\u0026amp;Dim mode serves as an alternative to the DT8-RGBWAF device.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300075139328,"sku":"89453831-HS","price":138.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-3Ch-CV-DT6_2020_acc942c4-4f31-4dbd-8452-9dd2f72e0bc9.jpg?v=1751922336"},{"product_id":"dali-4ch-cc-250ma-gem","title":"DALI 4Ch CC 250mA gem+","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 250mA com +, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 4Ch LED Dimmer is an independent control device, ideal for remote ceiling and luminaire integration.\u003c\/li\u003e\n\u003cli\u003eIt must be installed with proper cable relief for Class II equipment.\u003c\/li\u003e\n\u003cli\u003eInstall the dimmer in a dry, clean environment and ensure the system is powered off during installation, which should be done by qualified professionals.\u003c\/li\u003e\n\u003cli\u003eAdhere to all national electrical regulations.\u003c\/li\u003e\n\u003cli\u003eConnect the V+ and V- terminals to a DC power supply of SELV (Safety Extra Low Voltage) as labeled.\u003c\/li\u003e\n\u003cli\u003eThe DALI-line connections (DA, DA) are polarity-free, allowing for flexible wiring.\u003c\/li\u003e\n\u003cli\u003eThis dimmer is designed for ease of use and safety, making it suitable for various lighting setups where reliable and effective control is needed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300075172096,"sku":"89453855-250","price":161.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606.jpg?v=1751922336"},{"product_id":"dali-4ch-cc-350ma-gem","title":"DALI 4Ch CC 350mA gem+","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 350mA com +, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 4Ch LED Dimmer is an independent control device, ideal for remote ceiling and luminaire integration.\u003c\/li\u003e\n\u003cli\u003eIt must be installed with proper cable relief for Class II equipment.\u003c\/li\u003e\n\u003cli\u003eInstall the dimmer in a dry, clean environment and ensure the system is powered off during installation, which should be done by qualified professionals.\u003c\/li\u003e\n\u003cli\u003eAdhere to all national electrical regulations.\u003c\/li\u003e\n\u003cli\u003eConnect the V+ and V- terminals to a DC power supply of SELV (Safety Extra Low Voltage) as labeled.\u003c\/li\u003e\n\u003cli\u003eThe DALI-line connections (DA, DA) are polarity-free, allowing for flexible wiring.\u003c\/li\u003e\n\u003cli\u003eThis dimmer is designed for ease of use and safety, making it suitable for various lighting setups where reliable and effective control is needed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300075204864,"sku":"89453855-350","price":161.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_aa47ff8f-950e-4416-8aff-2e0453acd545.jpg?v=1751922335"},{"product_id":"dali-4ch-cc-500ma-gem","title":"DALI 4Ch CC 500mA gem+","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 5000mA com +, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 4Ch LED Dimmer is an independent control device, ideal for remote ceiling and luminaire integration.\u003c\/li\u003e\n\u003cli\u003eIt must be installed with proper cable relief for Class II equipment.\u003c\/li\u003e\n\u003cli\u003eInstall the dimmer in a dry, clean environment and ensure the system is powered off during installation, which should be done by qualified professionals.\u003c\/li\u003e\n\u003cli\u003eAdhere to all national electrical regulations.\u003c\/li\u003e\n\u003cli\u003eConnect the V+ and V- terminals to a DC power supply of SELV (Safety Extra Low Voltage) as labeled.\u003c\/li\u003e\n\u003cli\u003eThe DALI-line connections (DA, DA) are polarity-free, allowing for flexible wiring.\u003c\/li\u003e\n\u003cli\u003eThis dimmer is designed for ease of use and safety, making it suitable for various lighting setups where reliable and effective control is needed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300075401472,"sku":"89453855-500","price":161.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_a40d22ed-a068-476d-b62e-2f8fe7b49051.jpg?v=1751922334"},{"product_id":"dali-4ch-cc-700ma-gem","title":"DALI 4Ch CC 700mA gem+","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 700mA com +, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cp\u003eThe DALI 4Ch LED Dimmer is a standalone control device designed for use in ceiling and luminaire installations.\u003c\/p\u003e\n\u003cp\u003eIt is essential that the installation occurs in a dry, clean environment by qualified professionals and with the system powered off to ensure safety.\u003c\/p\u003e\n\u003cp\u003eAdhere to all relevant local electrical regulations during installation.\u003c\/p\u003e\n\u003cp\u003eFor proper operation, connect the V+ and V- terminals to a DC power supply of the Safety Extra Low Voltage (SELV) category, following the provided labels.\u003c\/p\u003e\n\u003cp\u003eThe DALI-line connections (DA, DA) are polarity-free, allowing for flexible wiring.\u003c\/p\u003e\n\u003cp\u003eWhen operating in Sw\u0026amp;Dim2 mode, both inputs must be connected to the same electrical phase to function correctly.\u003c\/p\u003e\n\u003cp\u003eThe DALI interface is engineered to handle mains voltage, offering built-in protection against potential wiring errors.\u003c\/p\u003e\n\u003cp\u003eThis feature ensures the device remains safe and functional even if incorrect connections are made.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the DALI wiring can be set up using various topologies, including line, tree, or star configurations, providing versatility in how the dimmer integrates into different lighting setups.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300077728000,"sku":"89453855-700","price":194.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_1322beeb-af60-436f-b8a8-20b7a8dd31fa.jpg?v=1751922334"},{"product_id":"dali-4ch-cc-350ma-gem-1","title":"DALI 4Ch CC 350mA gem-","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 350mA com -, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 4Ch LED Dimmer is an independent control gear suitable for ceiling integration and use in luminaires.\u003c\/li\u003e\n\u003cli\u003eEnsure proper cable relief for installation in Class II equipment.\u003c\/li\u003e\n\u003cli\u003eWiring should be done in a dry, clean environment as a permanent installation.\u003c\/li\u003e\n\u003cli\u003eInstallation must be carried out in a voltage-free state and by qualified specialists.\u003c\/li\u003e\n\u003cli\u003eFollow national regulations for electrical systems setup.\u003c\/li\u003e\n\u003cli\u003eConnect V+ and V- terminals to a DC supply of SELV category.\u003c\/li\u003e\n\u003cli\u003eConnection to the DALI line (DA, DA) is polarity-free.\u003c\/li\u003e\n\u003cli\u003eIn Sw\u0026amp;Dim2 mode, use the same phase for both inputs.\u003c\/li\u003e\n\u003cli\u003eThe DALI interface can handle mains voltage, offering protection against wrong wiring.\u003c\/li\u003e\n\u003cli\u003eDALI wiring topology can be line, tree, or star.\u003c\/li\u003e\n\u003cli\u003eConnect only one wire per terminal; with twin ferrules, ensure the maximum wire size is respected.\u003c\/li\u003e\n\u003cli\u003eDALI wiring can use standard low-voltage installation materials and may be routed with mains voltage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300078645504,"sku":"89453855-350GM","price":169.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_79753b3b-0d75-44f1-9ef8-636689744ef6.jpg?v=1751922333"},{"product_id":"dali-4ch-cc-500ma-gem-1","title":"DALI 4Ch CC 500mA gem-","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 500mA com -, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI 4Ch LED Dimmer is an independent control gear, it is suitable for remote ceiling and integration in luminaires.\u003c\/li\u003e\n\u003cli\u003eEnsure proper working cable relief for installation in protection class II equipment\u003c\/li\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in voltage-free state of the system and by qualified specialists.\u003c\/li\u003e\n\u003cli\u003eNational regulations for setting up electrical systems must be followed.\u003c\/li\u003e\n\u003cli\u003eConnect the terminals V+ and V- to a DC supply voltage of category SELV (Safety Extra Low Voltage) according to their label.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI-line (DA,DA) is polarity free.\u003c\/li\u003e\n\u003cli\u003eIf used in Sw\u0026amp;Dim2 mode for both inputs the same phase has to be used\u003c\/li\u003e\n\u003cli\u003eThe DALI-interface can handle mains voltage, protecting the device in case wrong wiring\u003c\/li\u003e\n\u003cli\u003eWiring topology of the DALI-line: line, tree, star\u003c\/li\u003e\n\u003cli\u003eConnect only one wire on each terminal, if twin ferrules are used take care to the maximum wire size\u003c\/li\u003e\n\u003cli\u003eThe DALI wiring can be realised with standard low-voltage installation material. \u003c\/li\u003e\n\u003cli\u003eNo special cables are required.\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300078678272,"sku":"89453855-500GM","price":169.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_dfe221d8-1bd9-4d3a-92dd-8af66aba7d76.jpg?v=1751922332"},{"product_id":"dali-4ch-cc-700ma-gem-1","title":"DALI 4Ch CC 700mA gem-","description":"\u003cp\u003eDALI 4Ch LED constant current PWM 700mA com -, Uin 12-48V, Uled 3-45V, SwitchDim2, colour\u0026amp;DIM\u003c\/p\u003e\n\u003cp\u003eThe DALI 4Ch LED Dimmer is an independent control gear, it is suitable for remote ceiling and integration iluminaires. \u003c\/p\u003e\n\u003cp\u003eEnsure proper working cable relief for installation in protection class II equipment.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in a voltage-free state of the system and by qualified specialists.\u003c\/li\u003e\n\u003cli\u003eNational regulations for setting up electrical systems must be followed.\u003c\/li\u003e\n\u003cli\u003eConnect the terminals V+ and V- to a DC supply voltage of category SELV (Safety Extra Low Voltage) according to their label.\u003c\/li\u003e\n\u003cli\u003eConnect only one wire on each terminal, if twin ferrules are used take care to the maximum wire size.\u003c\/li\u003e\n\u003cli\u003eThe DALI wiring can be realised with standard low-voltage installation material. \u003c\/li\u003e\n\u003cli\u003eNo special cables are required.\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300078743808,"sku":"89453855-700GM","price":205.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-4Ch-CC-DT6-1-1024x606_a91d8c48-68d3-4d09-a39e-a5903e08e1bd.jpg?v=1751922332"},{"product_id":"dali-dt8-cw-ww-pwm-16a-din-rail","title":"DALI DT8 CW-WW PWM 16A, Din Rail","description":"\u003cp\u003eDALI DT8 CW-WW LED constant voltage PWM 16A, Uin 12-48V, SwitchDim2, dim2warm, balance\u0026amp;DIM, Din Rail\u003c\/p\u003e\n\u003cp\u003eThe device offers three operating modes: DT8, Balance\u0026amp;Dim and Dim2Warm.\u003cbr\u003eDT8 (factory default) In this operating mode one DALI-address for the independent control of light level and colour temperature is used (Device Type 8 Mode Tc).\u003cbr\u003eAlternatively, the device can be controlled using 2 switch-inputs for mains voltage (SwitchDim2):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwD1: light level\u003c\/li\u003e\n\u003cli\u003eShort press: On\/Off\u003c\/li\u003e\n\u003cli\u003eLong press: dimming\u003c\/li\u003e\n\u003cli\u003eSwD2: colour temperature\u003c\/li\u003e\n\u003cli\u003eLong press: change colour temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300078776576,"sku":"89453841-HS","price":148.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-CW-WW-CV-DT8-2021.jpg?v=1751922331"},{"product_id":"dali-dt8-2-xcw-ww-pwm-16a-din-rail","title":"DALI DT8 2 xCW-WW PWM 16A Din Rail","description":"\u003cp\u003eDALI DT8 CW-WW LED constant voltage PWM 16A, Uin 12-48V, DIN rail\u003c\/p\u003e\n\u003cp\u003eThe device provides 2 Tunable White LEDdimmers.\u003c\/p\u003e\n\u003cp\u003eEach of them is controlled by a separate DALI-address.\u003c\/p\u003e\n\u003cp\u003e DT8-commands (colour-type Tc) are supported, which allows independent control of light level and colour temperature.\u003c\/p\u003e\n\u003cp\u003eThe dimmers can be selected in the component tree.\u003c\/p\u003e\n\u003cp\u003eThe parameter of each dimmer can be set afterwards.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Default Settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSummary of the factory default settings (delivery state for each of the CW-WW dimmers)\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300079005952,"sku":"89453858-HS","price":197.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/DALI-CV-DT8-2xCW-WW-16A-89453858-HS.jpg?v=1751922331"},{"product_id":"dali-dt8-rgb-led-dimmer-16a-din-rail","title":"DALI DT8 RGB LED Dimmer 16A, Din Rail","description":"\u003cp\u003eDALI DT8 RGB LED constant voltage PWM 16A, Uin 12-48V, SwitchDim2, colour\u0026amp;DIM, Din Rail\u003c\/p\u003e\n\u003ch3\u003eOperating Modes\u003c\/h3\u003e\n\u003cp\u003eThe device offers two operating modes: DT8 and Colour\u0026amp;Dim.\u003c\/p\u003e\n\u003cp\u003eDT8 (factory default) In this operating mode one DALI-address for the independent control of light level and colour is used (Device Type 8 RGBWAF).\u003c\/p\u003e\n\u003cp\u003eAlternatively, the device can be controlled using 2 switch-inputs for mains voltage (SwitchDim2):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwD1: light level\n\u003cul\u003e\n\u003cli\u003eshort press: On\/Off\u003c\/li\u003e\n\u003cli\u003eLong press: dimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSwD2: colour\n\u003cul\u003e\n\u003cli\u003eLong press: change colour Colour\u0026amp;Dim\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis operating mode is suitable for operating RGB—luminaires.\u003c\/p\u003e\n\u003cp\u003eTwo DALI-addresses are used, the first address to control the light level and the second address for changing the distribution on the output channels (e.g. for colour adjustments).\u003c\/p\u003e\n\u003cp\u003eThe Colour\u0026amp;Dim mode allows colour adjustments without affecting the level and vice versa.\u003c\/p\u003e\n\u003cp\u003eFor each channel, DALI-standard commands like dim up\/down and DAP are used.\u003c\/p\u003e\n\u003cp\u003eThus, the device can be used with all common controls and gateways (e.g. KNX).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eColour\u0026amp;Dim mode provides an alternative to the DT8-RGBWAF mode.\u003cbr\u003eCan be operated via DALI or SwitchDim2:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDALI-address 1, SwD1: light level\u003c\/li\u003e\n\u003cli\u003eDALI-address 2, SwD2: colour\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelection of operating mode With the help of the PC-software tool DALICockpit the operating mode can be easily set on the general settings page.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":44300079235328,"sku":"89453842-HS","price":174.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-RGB-CV-DT8-2022.jpg?v=1751922330"},{"product_id":"dali-dt8-rgbw-cc-4-100ma-gem","title":"DALI DT8 RGBW CC","description":"\u003ch3\u003eI\u003cstrong\u003enstallation\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe DALI RGBW LED Dimmer is an independent device and is intended for remote ceiling installation or in an enclosure.\u003c\/li\u003e\n\u003cli\u003e Ensure proper cable relief for installation in protection class II devices\u003c\/li\u003e\n\u003cli\u003eThe wiring should be carried out as a permanent installation in a dry and clean environment.\u003c\/li\u003e\n\u003cli\u003eInstallation may only be carried out in a voltage-free state of the system and by qualified specialists.\u003c\/li\u003e\n\u003cli\u003e National regulations for setting up electrical systems must be followed.\u003c\/li\u003e\n\u003cli\u003e Connect terminals V + and V- to a DC voltage supply of the SELV category (Safety Extra Low Voltage) according to their label.\u003c\/li\u003e\n\u003cli\u003eThe connection to the DALI line (terminals DA, DA) can be made regardless of polarity.\u003c\/li\u003e\n\u003cli\u003eFor alternative use as Sw\u0026amp;Dim inputs, the same phase must be used for both inputs.\u003c\/li\u003e\n\u003cli\u003eThe DALI bus input is protected against overvoltage (mains voltage) this protects the component from being destroyed in the event of incorrect wiring.\u003c\/li\u003e\n\u003cli\u003eWiring topology of the DALI-line: line, tree, star.\u003c\/li\u003e\n\u003cli\u003eConnect only one wire on each terminal, if twin ferrules are used take care to the maximum wire size.\u003c\/li\u003e\n\u003cli\u003eThe DALI wiring can be realised with standard low-voltage installation material. No special cables are required.\u003c\/li\u003e\n\u003cli\u003eThe DALI line may be routed together with the mains voltage (in one cable or as single wires in a tube)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAttention:\u003c\/span\u003e The DALI-signal is not classified as SELV circuit (Safety Extra\u003cbr\u003eLow Voltage).\u003c\/p\u003e\n\u003cp\u003eTherefore, the installation regulations for low voltage apply. The voltage drop on the DALI line must not exceed 2V at maximum length (300m) and maximum bus load (250mA).\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Common Plus Connector 100mA","offer_id":45885351756032,"sku":"86458912-100","price":165.6,"currency_code":"USD","in_stock":true},{"title":"Common Plus Connector 250mA","offer_id":45885351788800,"sku":"86458912-250","price":165.6,"currency_code":"USD","in_stock":true},{"title":"Common Plus Connector 350mA","offer_id":45885351821568,"sku":"86458912-350","price":165.6,"currency_code":"USD","in_stock":true},{"title":"Common Plus Connector 500mA","offer_id":45885351854336,"sku":"86458912-500","price":188.64,"currency_code":"USD","in_stock":true},{"title":"Common Plus Connector 700mA","offer_id":45885351887104,"sku":"86458912-700","price":201.6,"currency_code":"USD","in_stock":true},{"title":"Common Minus Connector 350mA","offer_id":45885351952640,"sku":"86458912-350GM","price":214.93,"currency_code":"USD","in_stock":true},{"title":"Common Minus Connector 500mA","offer_id":45885351985408,"sku":"86458912-500GM","price":243.36,"currency_code":"USD","in_stock":true},{"title":"Common Minus Connector 700mA","offer_id":45885352018176,"sku":"86458912-700GM","price":259.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-RGBW-CC-DT8-350mA700mA-1.jpg?v=1751922329"},{"product_id":"dali-2-usb-30ma","title":"DALI-2 USB 30mA","description":"\u003cp\u003eThe DALI USB module is supplied by the DALI-line (current consumption ~6mA) as well as by USB (current consumption 10mA\/40mA max).\u003c\/p\u003e\n\u003cp\u003eThe DALI-line and the USB are galvanically isolated.\u003c\/p\u003e\n\u003cp\u003eThe connection to the DALI-line is\u003cbr\u003epolarity free and protected against overvoltage of up to 270Vac.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFor the DALI-2 USB without included bus power supply an external DALI bus power supply is required.\u003c\/li\u003e\n\u003cli\u003eDALI-2 USB 30mA: the polarity of the output voltage is marked on the housing\u003cbr\u003e(DA+, DA-)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDALI USB 30mA and DALI-2 USB 30mA\u003c\/h3\u003e\n\u003cp\u003eOffers an integrated DALI bus power supply of 30mA, the power is supplied via USB. This power supply is switched off by default and can be activated in the DALI Cockpit\u003cbr\u003econfiguration software. (A version with the bus power supply on by default is available on request.)\u003c\/p\u003e\n\u003cp\u003ePlease note that the maximum bus supply must not exceed 250mA. If the external bus supply already delivers 250mA, the 30mA of the DALI USB should not be activated.\u003c\/p\u003e\n\u003c!----\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":45736644968704,"sku":"24138215-30","price":456.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/24138215-30-DALI-2-USB-30mA-Logo-1024x606.jpg?v=1751922324"},{"product_id":"dali-dt8-cw-ww-pwm-4a-led-dimmer-cv","title":"DALI DT8 CW-WW PWM 4A LED Dimmer CV","description":"\u003cp class=\"p3\"\u003e\u003cb\u003eOverview\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eDALI LED-Dimmer\u003c\/b\u003e\u003c\/span\u003e for controlling tunable white luminaires.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eSuitable for constant-voltage LED modules with operating voltages from \u003cspan class=\"s2\"\u003e\u003cb\u003e12V to 48V\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e\u003cb\u003eOperating Modes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eDT8\u003c\/b\u003e\u003c\/span\u003e:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOne DALI address for independent control of light level and color temperature \u003ci\u003e(DALI DT8, Colour Type Tc)\u003c\/i\u003e.\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e\u003cspan class=\"s3\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003eBalance \u0026amp; Dim\u003c\/b\u003e\u003cspan class=\"s3\"\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTwo DALI addresses:\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eOne for adjusting the light level.\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eOne for adjusting the channel balance (e.g., color temperature).\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e\u003cspan class=\"s3\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003eDim2Warm\u003c\/b\u003e\u003cspan class=\"s3\"\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOne DALI address for simultaneous adjustment of light level and color temperature.\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e\u003cspan class=\"s3\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cb\u003eSwitchDim2\u003c\/b\u003e\u003cspan class=\"s3\"\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eTwo switch inputs allow control of level and color without DALI.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e\u003cb\u003eTechnical specifications:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eDimming range from \u003cspan class=\"s2\"\u003e\u003cb\u003e0.1% to 100%\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eAdjustable PWM frequencies:\u003c\/p\u003e\n\u003cp class=\"p9\"\u003e\u003cspan class=\"s3\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eVersions before FW 4.6: \u003c\/span\u003e\u003cb\u003e122Hz \/ 244Hz \/ 488Hz \/ 976Hz\u003c\/b\u003e\u003cspan class=\"s3\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eFrom FW 4.6 onward: \u003cspan class=\"s2\"\u003e\u003cb\u003e250Hz \/ 500Hz \/ 1kHz\u003c\/b\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eCompact design suitable for:\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eIntegration into luminaires.\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eRemote ceiling installation.\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eDIN rail mounting.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eSupply voltage (depending on type):\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eFrom \u003cspan class=\"s2\"\u003e\u003cb\u003e12V to 28V DC\u003c\/b\u003e\u003c\/span\u003e or \u003cspan class=\"s2\"\u003e\u003cb\u003e12V to 48V DC\u003c\/b\u003e\u003c\/span\u003e, according to LED module operating voltage.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eMaximum input current per type:\u003c\/p\u003e\n\u003cp class=\"p8\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003e4A, 8A, 10A, or 16A\u003c\/b\u003e\u003c\/span\u003e (type-dependent).\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eThe maximum input current can be freely distributed between channels.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eLow standby power consumption.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eHigh efficiency.\u003c\/p\u003e\n\u003cp class=\"p7\"\u003e\u003cspan class=\"s3\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eConfiguration via \u003c\/span\u003e\u003cb\u003eDALI-Cockpit PC software\u003c\/b\u003e\u003cspan class=\"s3\"\u003e and \u003c\/span\u003e\u003cb\u003eDALI USB interface\u003c\/b\u003e\u003cspan class=\"s3\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eUser-friendly factory default settings.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p6\"\u003e\u003cb\u003eAdditional features (From Firmware version 4.6 onward):\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eDALI-2 compatible.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eLED calibration for precise light adjustment.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eConfigurable RESET behavior.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"Default Title","offer_id":46501229363456,"sku":"89453836","price":112.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-CW-WW-CV-DT8_2024_03-1-1024x606.jpg?v=1751922322"},{"product_id":"dali-2-rs232-ps240ma-din-rail-luba-protocol","title":"DALI-2 RS232 PS240mA, LUBA Protocol","description":"\u003cp\u003eThe Lunatone DALI-2 RS232 PS240mA LUBA combines two functions that normally occupy two positions on the rail: a bidirectional RS232-to-DALI interface using Lunatone's documented LUBA protocol, and an integrated 240mA DALI bus power supply strong enough for a fully loaded 64-device line. Connect a PLC or automation controller on one side, and the module runs and powers the entire DALI line on the other.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBidirectional RS232 communication with the DALI bus: control commands, addressing, configuration, status queries and monitoring\u003c\/li\u003e\n\u003cli\u003eLUBA protocol (Lunatone Universal Building and Automation Protocol) — documented, structured access supported by DALI Cockpit 1.38.60+\u003c\/li\u003e\n\u003cli\u003eIntegrated 240mA DALI bus power supply — no separate DALI PS needed\u003c\/li\u003e\n\u003cli\u003eSerial parameters: 38400 baud, 8 data bits, no parity, 1 stop bit\u003c\/li\u003e\n\u003cli\u003eSuccessor to the DALI RS232 PS240mA (24166096-PS)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eChoose your housing\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN Rail\u003c\/strong\u003e (24166096-LU-PS-HS): screw terminals, for the distribution board\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCeiling\u003c\/strong\u003e (24166096-LU-PS-DE): strain-relief housing for suspended ceilings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003e110–240V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDALI output\u003c\/td\u003e\n\u003ctd\u003eDALI + integrated bus power supply 240mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003eRS232 (38400, 8, n, 1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to +50°C · IP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eThe one-box answer for machine builders and BMS integrators bringing DALI lighting under serial control.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"DIN Rail","offer_id":46811625128192,"sku":"24166096-LU-PS-HS","price":347.04,"currency_code":"USD","in_stock":true},{"title":"Suspended Ceiling","offer_id":46811625160960,"sku":"24166096-LU-PS-DE","price":347.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Collage-DALI-RS232-PS-24166096-PS-HS-DE-01-1-1024x606.jpg?v=1752181548"},{"product_id":"dali-2-iot4-gateway","title":"DALI-2 IoT4 Gateway","description":"\u003cp\u003eThe Lunatone DALI-2 IoT4 Gateway is the central control device for connecting up to four DALI lines — as many as 256 DALI drivers and ballasts — to your local network. Built for commercial lighting projects where a single DALI line is not enough, it brings multi-line addressing, monitoring and control into one compact DIN-rail unit.\u003c\/p\u003e\u003ch3\u003eWhy integrators choose the IoT4\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 electrically isolated DALI lines, up to 64 control gear each\u003c\/li\u003e\n\u003cli\u003eRESTful API and WebSocket with JSON syntax (encrypted or plain) for custom integrations\u003c\/li\u003e\n\u003cli\u003eEnergy monitoring, remote support and scheduling through the documented open API\u003c\/li\u003e\n\u003cli\u003eNode-RED version (22176625-NR) ships with Node-RED support preinstalled for drag-and-drop automation flows\u003c\/li\u003e\n\u003cli\u003eModbus TCP support for BMS integration\u003c\/li\u003e\n\u003cli\u003eDALI-2 certified by the DiiA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply\u003c\/td\u003e\n\u003ctd\u003e24V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e1 × 10\/100Base-T, RJ45, isolated 1500V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDALI outputs\u003c\/td\u003e\n\u003ctd\u003e4 × DALI control output, electrically isolated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail, 2DU (98 × 36 × 56 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eIP40 housing \/ IP20 terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003eNote: this version requires one external DALI bus power supply per line. If you prefer integrated bus power, see the DALI-2 IoT4 Gateway PS. Typical applications include office floors, retail spaces, parking structures and any project that needs smartphone or BMS control of DALI lighting across multiple lines.\u003c\/p\u003e","brand":"LUNATONE","offers":[{"title":"IoT4","offer_id":49035291132160,"sku":"22176625","price":1264.32,"currency_code":"USD","in_stock":true},{"title":"IoT4 Node-RED","offer_id":49035291164928,"sku":"22176625-NR","price":1444.32,"currency_code":"USD","in_stock":true},{"title":"IoT4 PS","offer_id":49035291197696,"sku":"22176625-PS","price":1474.56,"currency_code":"USD","in_stock":true},{"title":"IoT4 PS Node-RED","offer_id":49035291230464,"sku":"22176625-PS-NR","price":1656.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/22176625-NR-DALI-2-IOT-4-Node-RED-DALI-2-Logo-1024x605.jpg?v=1784568348"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/collections\/LUNATONE.png?v=1781291906","url":"https:\/\/www.knxsupply.com\/collections\/lunatone.oembed?page=5","provider":"KNX Supply","version":"1.0","type":"link"}