{"title":"Elsner","description":"","products":[{"product_id":"weather-station-gps-receiver-5-shadings-suntracer-knx-gps-light-20-30-v-dc","title":"Weather Station, GPS Receiver, 5 shadings. Suntracer KNX-GPS light 20...30 V DC","description":"\u003cp\u003eThe KNX weather stations measure temperature, wind speed and brightness.They recognise precipitation and receive the GPS signal for time and location. In addition, using location coordinates and time,they calculate the exact position of the sun (azimuth and elevation).\u003c\/p\u003e\n\u003cp\u003eAll values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. The compact housing accommodates the sensors, evaluation circuits and buscoupling electronics.\u003c\/p\u003e\n\u003cp\u003eATTENTION: The calculation of the position of the sun is optimised for UTC -1...+3. The device therefore may only be applied within Europe. For other time zones, please use Suntracer KNX-GPS Weather Station.\u003c\/p\u003e\n\u003ch3\u003eFunctions\u003c\/h3\u003e\n\u003cul class=\"lg:columns-2\"\u003e\n\u003cli\u003eBrightness and position of the sun: The current light intensity is measured by a sensor. In addition the Suntracer KNX-GPS calculates the position of the sun (azimuth and elevation) using time and location\u003c\/li\u003e\n\u003cli\u003eShade control for 5 facades\u003c\/li\u003e\n\u003cli\u003eWind measurement: The wind strength measurement takes place electronically and thus noiselessly and reliably, even during hail, snow and sub-zero temperatures. Even turbulent air and anabatic winds in the vicinity of the weather station are recorded\u003c\/li\u003e\n\u003cli\u003eWind sensor monitoring: If the wind measurement value changes by less than ± 0.5 m\/s within 48 hours, a fault can be output. The wind measured value is output with the maximum measured value of 35 m\/s and all wind threshold values below this value become active\u003c\/li\u003e\n\u003cli\u003ePrecipitation recognition: The sensor surface is heated, so that only drops and flakes are recognised as precipitation, but not mist or dew. When the rain or snow stops, the sensor is soon dry again and the precipitation warning ends\u003c\/li\u003e\n\u003cli\u003eTemperature measurement\u003c\/li\u003e\n\u003cli\u003eWeekly and calendar time switch: The weather station receives the time and date from the integrated GPS receiver. The weekly time switch switches up to 4 different periods per day. With the calendar time switch up to 3 additional time periods can be defined, in which up to 2 On\/Off switches take place. The switching outputs can be used as communications objects. The switch times are set via parameters\u003c\/li\u003e\n\u003cli\u003eThreshold values for all measured and calculated values can be set via parameters or communications objects\u003c\/li\u003e\n\u003cli\u003e8 AND and 8 OR logic gates with 4 for each input. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be optionally configured as 1-bit or 2 x 8-bit\u003c\/li\u003e\n\u003cli\u003eConfiguration is made using the KNX software ETS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELSNER","offers":[{"title":"Default Title","offer_id":46178046509312,"sku":"3094","price":920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/3094.jpg?v=1734402216"},{"product_id":"weather-station-suntracer-knx-pro","title":"Weather station Suntracer KNX Pro","description":"\u003ch3 class=\"p1\"\u003eWIND MEASUREMENT WITH ULTRASOUND\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003eMeasurement methods and advantages\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThe extraordinary shape of the Suntracer KNX pro ensures a turbulence-free air flow. The wind measurement is carried out on two horizontal sections offset by\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e90°. On each section, two signals are sent in the opposite direction shortly after each other. The speed and direction of flow are determined from the differences\u003c\/p\u003e\n\u003cp class=\"p2\"\u003ein the running time of the two axes.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eAn advantage of the process is the short reaction time, even with gusts and peak values. Changes of direction or strength are directly visible in the change of the\u003c\/p\u003e\n\u003cp class=\"p2\"\u003emeasured value on the data bus. Only in this way can blinds, awning cloth and other wind-sensitive components be moved quickly and reliably into a safe position.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eIf the wind direction is known in the KNX system, the façades exposed to the wind can be specifically protected and costly wind damage avoided. Meanwhile,\u003c\/p\u003e\n\u003cp class=\"p2\"\u003ethe automatic shading and ventilation continues on the sides of the building facing away from the wind. Similar to the sun protection control, a compass direction\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eprofile is designed for the wind alarm and individual façade sections are controlled in a targeted manner. Both sensors and control functions are available in\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eSuntracer KNX pro. The often conflicting goals of protecting building elements and technology, offering the user comfort and opportunities for co-determination\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eand optimising the building‘s energy efficiency are thus reconciled in the best possible way.\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003eSMART AUTOMATIC SUN PROTECTION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p3\"\u003eShading control for up to 12 façades\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eBrightness and sun position dependent control with slat and shadow edge tracking\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eAlarm and protection functions (rain, wind, frost). Priorities over automatic commands can be individually defined\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eEnergy-optimised automation by blocking the shading up to the desired room temperature. Data from an indoor sensor can be received via\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eKNX and evaluated\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eVisual protection control according to time and twilight\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eDrive positions for sun protection or windows\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eFaçade status can be output as text\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eSimulation mode for setting the façade automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"p1\"\u003eMEASURED VALUE PROCESSING\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p3\"\u003eSwitching outputs for all measured and calculated values\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eMixed value calculation for temperature and humidity\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eThreshold values can be set by parameter or via communication objects.\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eSeparate threshold values for night\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eDew point calculation with control function for the cooling medium of air conditioning systems\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eBus message whether the temperature and humidity values are within the comfort field (DIN 1946)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"p1\"\u003eINTELLIGENT KNX MODULES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p3\"\u003eWeek and calendar time switch: All time switching outputs can be used as communication objects\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eThe week time switch has 24 time periods. Each period can be parameterized either as output or input. If the period is an output, the switching time is defined by parameter or by communication object\u003c\/li\u003e\n\u003cli class=\"p3\"\u003eThe calendar time switch has 4 time periods. Two on\/off operations can be defined for each period, which are executed daily \u003c\/li\u003e\n\u003cli class=\"p3\"\u003e8 AND and 8 OR logic gates with 4 inputs each. All switching events and 16 logic inputs (communication objects) can be used as inputs for the logic gates. The output of each gate can be configured either as 1 bit or 2x 8 bits\u003c\/li\u003e\n\u003cli class=\"p3\"\u003e8 multifunction modules (calculators) for changing input data by calculations, by querying a condition or by converting the data point type \u003c\/li\u003e\n\u003cli class=\"p3\"\u003eSummer compensation for energy-conscious cooling. The setpoint temperature in the room is adapted to the outside temperature via a characteristic curve and the minimum and maximum value of the setpoint temperature is determined\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"p1\"\u003eMOUNTING\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Elsner_Themen_Professionelle-Wetterdaten_Image-big_SuntracerKNXpro_DT-2.jpg?v=1769734547\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe filigree, ring-shaped structure of Suntracer KNX pro is very resistant, as it is reinforced on the inside by stainless steel elements.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIn order to capture the weather unadulterated, Suntracer KNX pro is mounted on a mast on the roof of the building. The supplied mast extension ensures a distance between sensors and surrounding components.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIt can be clamped to a vertical mast or a horizontal pipe or screwed to a beam or the wall.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFor correct measurement results the ring must be aligned horizontally. A small spirit level, which is included with the instrument, helps here.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe programming button of Suntracer KNX pro is a magnetic contact located inside the housing - a weather-resistant solution. A magnetic telescopic rod for triggering is supplied.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","brand":"ELSNER","offers":[{"title":"Default Title","offer_id":47640084250880,"sku":"70900","price":2990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/70900_02.jpg?v=1769735369"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/collections\/elsner_c6fb95f0-0f63-4a1a-857f-1fd106aeaf78.png?v=1781293106","url":"https:\/\/www.knxsupply.com\/collections\/elsner-1.oembed","provider":"KNX Supply","version":"1.0","type":"link"}