{"title":"EELECTRON","description":"\u003cp\u003eKNX room controllers, keypads, actuators and system devices from Eelectron S.p.A., Milan, Italy.\u003c\/p\u003e","products":[{"product_id":"eelectron-bi04f01knx-knx-potential-free-binary-input-4-fold","title":"Eelectron BI04F01KNX KNX potential-free binary input 4-fold","description":"\u003cp\u003eThe Eelectron BI04F01KNX is a 4-channel DIN-rail binary input for KNX that brings conventional pushbuttons, switches, door and window contacts and motion detectors onto the bus from the distribution board. Inputs can be set for short runs (up to 30 m (98 ft)) or long runs (up to 100 m (328 ft)) with end-of-line resistor supervision, which lets the module watch magnetic contacts and detectors with a tamper-aware level of safety that plain inputs do not offer.\u003c\/p\u003e\n\u003cp\u003eIt does more than switching: all 4 inputs can be reconfigured as analog NTC probe inputs to publish temperatures or run a complete 2-stage PI thermostat, two inputs can host plug-in SM03E01ACC (CO₂ + temperature) or SM03E02ACC (VOC\/eCO₂ + temperature) smart sensors, and 10 logic blocks plus a pulse counter are available for metering and interlock tasks. Typical uses are hotel rooms, offices and retrofits where existing low-voltage wiring already terminates in the panel.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 dry-contact inputs for pushbuttons, switches, sensors; functions for on\/off, dimming, shutters, scenes and sequences\u003c\/li\u003e\n\u003cli\u003eLong-distance mode up to 100 m (328 ft) with 1.8 kΩ (1\/8 W) EOL resistor line supervision; short-distance mode up to 30 m (98 ft)\u003c\/li\u003e\n\u003cli\u003ePulse counter on inputs configured as short-distance digital\u003c\/li\u003e\n\u003cli\u003eNTC analog mode on all 4 inputs: temperature to bus or a full 2-stage PI thermostat module for heating\/cooling, valves and 2\/4-pipe fan coils\u003c\/li\u003e\n\u003cli\u003eTwo inputs accept plug-in smart sensors SM03E01ACC (temperature + CO₂ 10–1000 ppm) or SM03E02ACC (temperature + VOC \/ eCO₂)\u003c\/li\u003e\n\u003cli\u003e10 logic blocks with logical, threshold, algebraic and conditional operators; predefined algorithms for proportional control and dew point\u003c\/li\u003e\n\u003cli\u003ePer-input status LED on the front panel\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 15 mA; 4-module PC-GF housing; 250 group addresses \/ 250 associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–32 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 15 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs (digital mode)\u003c\/td\u003e\n\u003ctd\u003e4 dry-contact inputs; scanning voltage 20 V DC; long cable test current 6 mA, short cable 1 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax cable length\u003c\/td\u003e\n\u003ctd\u003eLong distance 100 m (328 ft); short distance 30 m (98 ft) (twisted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEOL supervision\u003c\/td\u003e\n\u003ctd\u003e1.8 kΩ, 1\/8 W end-of-line resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs (analog mode)\u003c\/td\u003e\n\u003ctd\u003eNTC probes TS01A01ACC (-20 to +100 °C) or TS01B01ACC (-50 to +60 °C) on all 4 inputs; max cable 30 m (98 ft) twisted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmart sensor inputs\u003c\/td\u003e\n\u003ctd\u003e2, for SM03E01ACC \/ SM03E02ACC plug-in sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e250 \/ 250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail, 4 modules; LV distribution switchboard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003ePC-GF, IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eBI0xF01KNX binary input application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.14 kg (0.31 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBI04F01KNX \/ 8054144522272\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFamily: BI08F01KNX (8 inputs), BI16F01KNX (16 inputs, mains-assisted) and BI08H01KNX (8 x 100–250 V inputs). Accessories: NTC probes TS01A01ACC \/ TS01B01ACC; plug-in sensors SM03E01ACC \/ SM03E02ACC. Compact in-wall alternatives: IO22D02KNX, IO44D02KNX, IO62D02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_BI0xF01KNXFI00010100_datasheet_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559237062912,"sku":"BI04F01KNX","price":179.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BI04F01KNX.png?v=1791475261"},{"product_id":"eelectron-9025gs00a01-replacement-glass-white","title":"Eelectron 9025GS00A01 Replacement Glass white","description":"\u003cp\u003eThe Eelectron 9025GS00A01 is the white 2-module glass cover for the 9025-series TS01D01ACC wall temperature probe. The probe hardware is a blank, passive NTC module; this plain glass front gives it the same flush, frameless appearance as the 9025 capacitive thermostats, so a second-zone or bathroom temperature pick-up looks identical to the room controller next to it.\u003c\/p\u003e\n\u003cp\u003eSupplied as a replacement or completion part: one glass per probe, in white for the white probe finish. The black glass is 9025GS00A03. Handle with care during installation to avoid chipping the glass edge.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-module plain glass cover for the TS01D01ACC 9025 temperature probe\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003cli\u003eFits probe TS01D01ACC-1 \/ TS01D01ACC-3\u003c\/li\u003e\n\u003cli\u003eFrameless flush look matching the 9025 thermostat glass covers\u003c\/li\u003e\n\u003cli\u003ePassive part, no electronics\u003c\/li\u003e\n\u003cli\u003eReplacement \/ completion item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGlass cover, 2-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC 9025 temperature probe, 2-module (TS01D01ACC-1 \/ TS01D01ACC-3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e96 × 96 mm (3.8 × 3.8 in) front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003e9025GS00A01 \/ 8054144520407\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003e9025GS00A03 (black). Probe hardware: TS01D01ACC-1 \/ TS01D01ACC-3. 3-module glass: 9025GS300A01 \/ 9025GS300A03. Thermostat glass covers of the same series: 9025GT07… (2-module) and 9025GT307… (3-module).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The TS01D01ACC probe and the Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255478528,"sku":"9025GS00A01","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/9025GS300A01-3.jpg?v=1791475502"},{"product_id":"eelectron-9025gs00a03-replacement-glass-black","title":"Eelectron 9025GS00A03 Replacement Glass black","description":"\u003cp\u003eThe Eelectron 9025GS00A03 is the black 2-module glass cover for the 9025-series TS01D01ACC wall temperature probe. The probe hardware is a blank, passive NTC module; this plain glass front gives it the same flush, frameless appearance as the 9025 capacitive thermostats, so a second-zone or bathroom temperature pick-up looks identical to the room controller next to it.\u003c\/p\u003e\n\u003cp\u003eSupplied as a replacement or completion part: one glass per probe, in black for the black probe finish. The white glass is 9025GS00A01. Handle with care during installation to avoid chipping the glass edge.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-module plain glass cover for the TS01D01ACC 9025 temperature probe\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eFits probe TS01D01ACC-1 \/ TS01D01ACC-3\u003c\/li\u003e\n\u003cli\u003eFrameless flush look matching the 9025 thermostat glass covers\u003c\/li\u003e\n\u003cli\u003ePassive part, no electronics\u003c\/li\u003e\n\u003cli\u003eReplacement \/ completion item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGlass cover, 2-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC 9025 temperature probe, 2-module (TS01D01ACC-1 \/ TS01D01ACC-3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e96 × 96 mm (3.8 × 3.8 in) front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003e9025GS00A03 \/ 8054144520414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003e9025GS00A01 (white). Probe hardware: TS01D01ACC-1 \/ TS01D01ACC-3. 3-module glass: 9025GS300A01 \/ 9025GS300A03. Thermostat glass covers of the same series: 9025GT07… (2-module) and 9025GT307… (3-module).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The TS01D01ACC probe and the Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255511296,"sku":"9025GS00A03","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/9025GS300A03-3.jpg?v=1791475503"},{"product_id":"eelectron-9025gs300a01-replacement-glass-for-temperature-sensor-white","title":"Eelectron 9025GS300A01 Replacement Glass for Temperature Sensor white","description":"\u003cp\u003eThe Eelectron 9025GS300A01 is the white 3-module glass cover for the 9025-series TS01D01ACC wall temperature probe. The probe hardware is a blank, passive NTC module; this plain glass front gives it the same flush, frameless appearance as the 9025 capacitive thermostats, so a second-zone or bathroom temperature pick-up looks identical to the room controller next to it.\u003c\/p\u003e\n\u003cp\u003eSupplied as a replacement or completion part: one glass per probe, in white for the white probe finish. The black glass is 9025GS300A03. Handle with care during installation to avoid chipping the glass edge.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3-module plain glass cover for the TS01D01ACC 9025 temperature probe\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003cli\u003eFits probe TS01D01ACC-1-3M \/ TS01D01ACC-3-3M\u003c\/li\u003e\n\u003cli\u003eFrameless flush look matching the 9025 thermostat glass covers\u003c\/li\u003e\n\u003cli\u003ePassive part, no electronics\u003c\/li\u003e\n\u003cli\u003eReplacement \/ completion item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGlass cover, 3-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC 9025 temperature probe, 3-module (TS01D01ACC-1-3M \/ TS01D01ACC-3-3M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e126 × 96 mm (5.0 × 3.8 in) front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003e9025GS300A01 \/ 8054144520421\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003e9025GS300A03 (black). Probe hardware: TS01D01ACC-1-3M \/ TS01D01ACC-3-3M. 2-module glass: 9025GS00A01 \/ 9025GS00A03. Thermostat glass covers of the same series: 9025GT07… (2-module) and 9025GT307… (3-module).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The TS01D01ACC probe and the Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255544064,"sku":"9025GS300A01","price":38.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/9025GS300A01-3_01cbdaa4-d8ad-459d-80d7-7b257af29237.jpg?v=1791475504"},{"product_id":"eelectron-9025gs300a03-replacement-glass-for-temperature-sensor-black","title":"Eelectron 9025GS300A03 Replacement Glass for Temperature Sensor black","description":"\u003cp\u003eThe Eelectron 9025GS300A03 is the black 3-module glass cover for the 9025-series TS01D01ACC wall temperature probe. The probe hardware is a blank, passive NTC module; this plain glass front gives it the same flush, frameless appearance as the 9025 capacitive thermostats, so a second-zone or bathroom temperature pick-up looks identical to the room controller next to it.\u003c\/p\u003e\n\u003cp\u003eSupplied as a replacement or completion part: one glass per probe, in black for the black probe finish. The white glass is 9025GS300A01. Handle with care during installation to avoid chipping the glass edge.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3-module plain glass cover for the TS01D01ACC 9025 temperature probe\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003cli\u003eFits probe TS01D01ACC-1-3M \/ TS01D01ACC-3-3M\u003c\/li\u003e\n\u003cli\u003eFrameless flush look matching the 9025 thermostat glass covers\u003c\/li\u003e\n\u003cli\u003ePassive part, no electronics\u003c\/li\u003e\n\u003cli\u003eReplacement \/ completion item\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eGlass cover, 3-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC 9025 temperature probe, 3-module (TS01D01ACC-1-3M \/ TS01D01ACC-3-3M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e126 × 96 mm (5.0 × 3.8 in) front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003e9025GS300A03 \/ 8054144520438\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003e9025GS300A01 (white). Probe hardware: TS01D01ACC-1-3M \/ TS01D01ACC-3-3M. 2-module glass: 9025GS00A01 \/ 9025GS00A03. Thermostat glass covers of the same series: 9025GT07… (2-module) and 9025GT307… (3-module).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The TS01D01ACC probe and the Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255838976,"sku":"9025GS300A03","price":38.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/9025GS300A03-3_ce43c73b-d23a-4c65-9263-72081f35588c.jpg?v=1791475506"},{"product_id":"eelectron-cv00a01knx-knx-bus-cable-1x2x0-8-100-mt","title":"Eelectron CV00A01KNX KNX Bus Cable 1X2X0,8 - 100 Mt","description":"\u003cp\u003eThe Eelectron CV00A01KNX is a 100 m (328 ft) coil of 1×2×0.8 mm KNX bus cable — a single red\/black twisted pair for the KNX TP bus in the netbus-series construction for fixed indoor installation in conduit and under plaster. It is the lighter option where no auxiliary pair is needed: line runs between boards, risers, or the drop to each detector and keypad.\u003c\/p\u003e\n\u003cp\u003eSolid 0.8 mm (20 AWG) copper, PE insulation, foil shield with drain wire and an LSZH sheath in KNX green (RAL 6018) meet EN 50090; CPR Eca class, flame retardant, and permitted alongside 450\/750 V and 0.6\/1 kV power cables (Uo ≤ 400 V). For a spare auxiliary pair choose CV00A02KNX.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × 2 × 0.8 mm (20 AWG) solid copper, one red\/black bus pair\u003c\/li\u003e\n\u003cli\u003e100 m (328 ft) coil; approx. 3.5 kg\u003c\/li\u003e\n\u003cli\u003eLSZH outer sheath in KNX green RAL 6018; PE core insulation\u003c\/li\u003e\n\u003cli\u003eFoil shield with continuity (drain) conductor\u003c\/li\u003e\n\u003cli\u003enetbus-series fieldbus cable for EIB\/KNX, EN 50090 \/ EN 50090-2-2 reference\u003c\/li\u003e\n\u003cli\u003eCPR class Eca (EU 305\/2011); flame retardant per EN 60332-1\u003c\/li\u003e\n\u003cli\u003ePermitted to coexist with 450\/750 V and 0.6\/1 kV power cables (Uo up to 400 V)\u003c\/li\u003e\n\u003cli\u003eFor fixed installation in ducts, conduit and under plaster\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e1 × 2 × 0.8 mm, one twisted pair red + black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eSolid copper 0.80 mm (20 AWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation \/ sheath\u003c\/td\u003e\n\u003ctd\u003ePE cores; LSZH outer sheath, green RAL 6018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShield\u003c\/td\u003e\n\u003ctd\u003eFoil shield with continuity conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire performance\u003c\/td\u003e\n\u003ctd\u003eCPR Eca (EU 305\/2011); flame retardant EN 60332-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eFixed indoor installation in conduit \/ under plaster; may run with 450\/750 V and 0.6\/1 kV power cables (Uo ≤ 400 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 50090, EN 50090-2-2, EN 50575:2014+A1:2016, EN 60332-1-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength \/ packaging\u003c\/td\u003e\n\u003ctd\u003e100 m (328 ft) coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.5 kg (7.72 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eCV00A01KNX \/ 8054144521053\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eTwo-pair 2×2×0.8 version with auxiliary pair: CV00A02KNX (100 m). 500 m reels: CV05A01KNX, CV05A02KNX. KNX bus connectors WG00A01ACC (red\/black, 100 pcs).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE \/ CPR (Eca) compliant cable; not UL listed — verify NEC Class 2 wiring and local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_CVxAxKNXFI00020100_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255871744,"sku":"CV00A01KNX","price":171.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/CV00A-BUS-KNX-CABLE-2X2X08-12.jpg?v=1791475506"},{"product_id":"eelectron-cv00a02knx-knx-bus-cable-2x2x0-8-100-mt","title":"Eelectron CV00A02KNX KNX Bus Cable 2X2X0,8 - 100 Mt","description":"\u003cp\u003eThe Eelectron CV00A02KNX is a 100 m (328 ft) coil of 2×2×0.8 mm KNX bus cable — the classic four-core green KNX cable with one red\/black pair for the bus and a spare yellow\/white pair for auxiliary use (for example 30 V DC auxiliary power or a second line). It is the netbus-series fieldbus cable for fixed indoor installation in conduit and under plaster, built to EN 50090.\u003c\/p\u003e\n\u003cp\u003eSolid 0.8 mm (20 AWG) copper, PE insulation, AL\/PET foil shield with drain wire and a 6.0 mm LSZH sheath in KNX green (RAL 6018) give max. 100 pF\/m capacitance. CPR Eca class, flame retardant, and permitted alongside 450\/750 V and 0.6\/1 kV power cables (Uo ≤ 400 V). Single-pair version: CV00A01KNX.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 × 2 × 0.8 mm (20 AWG) solid copper, 4 cores: red\/black (bus) + yellow\/white (auxiliary)\u003c\/li\u003e\n\u003cli\u003e100 m (328 ft) coil; approx. 5.9 kg per 100 m\u003c\/li\u003e\n\u003cli\u003eLSZH outer sheath, 6.0 mm, KNX green RAL 6018; PE core insulation\u003c\/li\u003e\n\u003cli\u003eAL\/PET tape shield with CuSn 26 AWG continuity (drain) conductor\u003c\/li\u003e\n\u003cli\u003eCapacitance max. 100 pF\/m; impedance 70 Ω at 1 MHz; max. operating voltage 125 V\u003c\/li\u003e\n\u003cli\u003eCPR class Eca (EU 305\/2011); flame retardant per EN 60332-1; EN 50090 \/ EN 50090-2-2 reference\u003c\/li\u003e\n\u003cli\u003eOperating temperature −30…+80 °C; min. bending radius 10 × outer diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003e2 × 2 × 0.8 mm, 4 insulated cores in quad: red + black (pair 1), yellow + white (pair 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eSolid copper 1 × 0.80 mm (20 AWG)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation \/ sheath\u003c\/td\u003e\n\u003ctd\u003ePE cores; LSZH outer sheath 6.0 mm (0.24 in), green RAL 6018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShield\u003c\/td\u003e\n\u003ctd\u003eAL\/PET tape + CuSn 26 AWG continuity conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical (20 °C)\u003c\/td\u003e\n\u003ctd\u003eRc 37.5 Ω\/km; capacitance max. 100 pF\/m; impedance 70 Ω @ 1 MHz; insulation resistance ≥ 5 GΩ·km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eMax. operating 125 V; test 1.5 kV AC core\/core, 2.0 kV AC\/5 min on sheath (in water)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFire performance\u003c\/td\u003e\n\u003ctd\u003eCPR Eca (EU 305\/2011); flame retardant EN 60332-1-2; heat of combustion 983 MJ\/km\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−30…+80 °C (−22…+176 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. bending radius\u003c\/td\u003e\n\u003ctd\u003e10 × outer diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 50090, EN 50090-2-2, EN 50575:2014+A1:2016, EN 60332-1-2, EN 13501-6, CEI UNEL 36762 \/ 35016, CEI 64-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength \/ packaging\u003c\/td\u003e\n\u003ctd\u003e100 m (328 ft) coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5 kg (11.02 lb) (datasheet: approx. 59 kg\/km)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eCV00A02KNX \/ 8054144521060\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eSingle-pair 1×2×0.8 version: CV00A01KNX (100 m). 500 m reels: CV05A01KNX, CV05A02KNX. KNX bus connectors WG00A01ACC (red\/black, 100 pcs).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE \/ CPR (Eca) compliant cable; not UL listed — verify NEC Class 2 wiring and local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_CVxAxKNXFI00020100_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255904512,"sku":"CV00A02KNX","price":276.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/CV00A-BUS-KNX-CABLE-2X2X08-13.jpg?v=1791475508"},{"product_id":"eelectron-ld00a01acc-miniature-led-lamps-blue-3v-with-wired-lead-20-pz","title":"Eelectron LD00A01ACC Miniature Led Lamps Blue 3V With Wired Lead - 20 Pz","description":"\u003cp\u003eThe Eelectron LD00A01ACC is a pack of 20 miniature blue 3 V LED indicator lamps with 110 mm (4.3 in) red\/black wired leads. They are the signalling LEDs for Eelectron KNX devices whose inputs can be re-purposed as LED outputs — the IO04F01KNX universal actuator, the AD84C01KNX analog\/digital module with its 4 LED outputs and similar modules — so a conventional pushbutton plate, a bedside panel or a door-side status light can show bus feedback (light on, do-not-disturb, make-up-room, alarm) without a KNX keypad.\u003c\/p\u003e\n\u003cp\u003eEach lamp is a small-package LED pre-wired for easy insertion into a pushbutton or indicator housing; the lead length should be added to the mechanical dimensions when planning the installation. Twenty pieces per pack cover a typical hotel-room or apartment panel schedule. The white version is LD00A11ACC.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 20 miniature blue LED lamps, 3 V, with wired leads\u003c\/li\u003e\n\u003cli\u003eLead length 110 mm (4.3 in), red\/black\u003c\/li\u003e\n\u003cli\u003eFor the LED signalling outputs of Eelectron KNX devices (e.g. IO04F01KNX inputs in LED-output mode, AD84C01KNX LED outputs)\u003c\/li\u003e\n\u003cli\u003eStatus indication on conventional pushbutton plates, bedside and door panels\u003c\/li\u003e\n\u003cli\u003ePassive component — driven by the host device output\u003c\/li\u003e\n\u003cli\u003eColour: blue (white version: LD00A11ACC; blue version: LD00A01ACC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eMiniature LED lamp with wired lead, pack of 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e3 V (see datasheet for electrical\/optical characteristics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003e110 mm (4.3 in), red\/black wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with LED signalling outputs (IO04F01KNX, AD84C01KNX and others)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02 kg (0.04 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eLD00A01ACC \/ 8054144525501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eLD00A11ACC (white LED, pack of 20). Host devices: IO04F01KNX universal actuator, AD84C01KNX 8 IN \/ 4 LED OUT module. KNX bus connectors WG00A01ACC; bus cable CV00A01KNX \/ CV00A02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_110928104826_LD00AxxACCFI01010001_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255937280,"sku":"LD00A01ACC","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/LD00A0xACC-LD00A1xACC-12.jpg?v=1791475509"},{"product_id":"eelectron-ld00a11acc-miniature-led-lamps-white-3v-with-wired-lead-20-pz","title":"Eelectron LD00A11ACC Miniature Led Lamps White 3V With Wired Lead - 20 Pz","description":"\u003cp\u003eThe Eelectron LD00A11ACC is a pack of 20 miniature white 3 V LED indicator lamps with 110 mm (4.3 in) red\/black wired leads. They are the signalling LEDs for Eelectron KNX devices whose inputs can be re-purposed as LED outputs — the IO04F01KNX universal actuator, the AD84C01KNX analog\/digital module with its 4 LED outputs and similar modules — so a conventional pushbutton plate, a bedside panel or a door-side status light can show bus feedback (light on, do-not-disturb, make-up-room, alarm) without a KNX keypad.\u003c\/p\u003e\n\u003cp\u003eEach lamp is a small-package LED pre-wired for easy insertion into a pushbutton or indicator housing; the lead length should be added to the mechanical dimensions when planning the installation. Twenty pieces per pack cover a typical hotel-room or apartment panel schedule. The blue version is LD00A01ACC.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 20 miniature white LED lamps, 3 V, with wired leads\u003c\/li\u003e\n\u003cli\u003eLead length 110 mm (4.3 in), red\/black\u003c\/li\u003e\n\u003cli\u003eFor the LED signalling outputs of Eelectron KNX devices (e.g. IO04F01KNX inputs in LED-output mode, AD84C01KNX LED outputs)\u003c\/li\u003e\n\u003cli\u003eStatus indication on conventional pushbutton plates, bedside and door panels\u003c\/li\u003e\n\u003cli\u003ePassive component — driven by the host device output\u003c\/li\u003e\n\u003cli\u003eColour: white (white version: LD00A11ACC; blue version: LD00A01ACC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eMiniature LED lamp with wired lead, pack of 20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated voltage\u003c\/td\u003e\n\u003ctd\u003e3 V (see datasheet for electrical\/optical characteristics)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003e110 mm (4.3 in), red\/black wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with LED signalling outputs (IO04F01KNX, AD84C01KNX and others)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.02 kg (0.04 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eLD00A11ACC \/ 8054144525518\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eLD00A01ACC (blue LED, pack of 20). Host devices: IO04F01KNX universal actuator, AD84C01KNX 8 IN \/ 4 LED OUT module. KNX bus connectors WG00A01ACC; bus cable CV00A01KNX \/ CV00A02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_110928104826_LD00AxxACCFI01010001_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559255970048,"sku":"LD00A11ACC","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/LD00A0xACC-LD00A1xACC-14.jpg?v=1791475510"},{"product_id":"eelectron-ts01a04acc-temperature-probe-pack-of-4","title":"Eelectron TS01A04ACC Temperature Probe - Pack Of 4","description":"\u003cp\u003eThe Eelectron TS01A04ACC is a pack of 4 TS01A01ACC NTC temperature probes (−20…+100 °C (−4…+212 °F)) for the analog inputs of Eelectron KNX devices. One probe per input turns a presence detector, thermostat, actuator or input module into a temperature transmitter or a complete PI thermostat; the 4-pack suits a multi-zone AD84C01KNX, IO04F01KNX or TC28A01KNX panel.\u003c\/p\u003e\n\u003cp\u003eThe TS01A01ACC element suits general-purpose duct, pipe-surface and room sensing — floor-heating screed probes, supply-air and radiator-return measurement. Runs of up to 30 m (98 ft) twisted pair are supported; keep the lead at least 6 mm from live 230 V conductors. Single probe: TS01A01ACC; other types: TS01B01ACC (−50…+60 °C), TS01C01ACC (metal case, −40…+105 °C) and TS01D01ACC (9025 wall probe, −5…+45 °C).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 4 TS01A01ACC NTC temperature probes\u003c\/li\u003e\n\u003cli\u003eMeasuring range −20…+100 °C (−4…+212 °F)\u003c\/li\u003e\n\u003cli\u003eNTC resistance tolerance ±3 %\u003c\/li\u003e\n\u003cli\u003e2-wire lead, black cable, black ntc\u003c\/li\u003e\n\u003cli\u003eFor the analog NTC inputs of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 6 mm from live parts\u003c\/li\u003e\n\u003cli\u003ePassive sensor — no power supply, no bus load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNTC temperature probe, pack of 4 (TS01A01ACC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring range\u003c\/td\u003e\n\u003ctd\u003e−20…+100 °C (−4…+212 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003eNTC resistance ±3 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003e2-wire lead, black cable, black ntc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eAnalog NTC input of the host device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance from live parts\u003c\/td\u003e\n\u003ctd\u003e≥ 6 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with NTC probe input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01 kg (0.02 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01A04ACC \/ 8054144527994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eSingle probe: TS01A01ACC. Other probe types: TS01B04ACC (pack of 4, −50…+60 °C), TS01C01ACC (metal case), TS01D01ACC-1 \/ -3 (9025 wall probe). Host devices: PD00E01KNX \/ E02 \/ E03 \/ E11 \/ E13 \/ E20 \/ E21 \/ E31 \/ E39 presence detectors, RT07A01KNX \/ RH07A01KNX thermostats, TC28A01KNX fan-coil controller, AD84C01KNX analog\/digital module.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_AD84C01KNXFI000010101_datasheet_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559256035584,"sku":"TS01A04ACC","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01A01ACC-7.jpg?v=1791475511"},{"product_id":"eelectron-ts01b04acc-external-temperature-probe-pack-of-4","title":"Eelectron TS01B04ACC External Temperature Probe - Pack Of 4","description":"\u003cp\u003eThe Eelectron TS01B04ACC is a pack of 4 TS01B01ACC NTC temperature probes (−50…+60 °C (−58…+140 °F)) for the analog inputs of Eelectron KNX devices. One probe per input turns a presence detector, thermostat, actuator or input module into a temperature transmitter or a complete PI thermostat; the 4-pack suits a multi-zone AD84C01KNX, IO04F01KNX or TC28A01KNX panel.\u003c\/p\u003e\n\u003cp\u003eThe TS01B01ACC element suits external and cold-location sensing — outdoor temperature for weather compensation, cold rooms, loggias and unheated spaces. Runs of up to 30 m (98 ft) twisted pair are supported; keep the lead at least 3 mm from live 230 V conductors. Single probe: TS01B01ACC; other types: TS01A01ACC (−20…+100 °C), TS01C01ACC (metal case, −40…+105 °C) and TS01D01ACC (9025 wall probe, −5…+45 °C).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 4 TS01B01ACC NTC temperature probes\u003c\/li\u003e\n\u003cli\u003eMeasuring range −50…+60 °C (−58…+140 °F)\u003c\/li\u003e\n\u003cli\u003eNTC resistance tolerance ±2 %\u003c\/li\u003e\n\u003cli\u003e2-wire lead with double insulation, white cable, white ntc\u003c\/li\u003e\n\u003cli\u003eFor the analog NTC inputs of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 3 mm from live parts\u003c\/li\u003e\n\u003cli\u003ePassive sensor — no power supply, no bus load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eNTC temperature probe, pack of 4 (TS01B01ACC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring range\u003c\/td\u003e\n\u003ctd\u003e−50…+60 °C (−58…+140 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003eNTC resistance ±2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003e2-wire lead with double insulation, white cable, white ntc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eAnalog NTC input of the host device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance from live parts\u003c\/td\u003e\n\u003ctd\u003e≥ 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with NTC probe input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.01 kg (0.02 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01B04ACC \/ 8054144528007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eSingle probe: TS01B01ACC. Other probe types: TS01A04ACC (pack of 4, −20…+100 °C), TS01C01ACC (metal case), TS01D01ACC-1 \/ -3 (9025 wall probe). Host devices: PD00E01KNX \/ E02 \/ E03 \/ E11 \/ E13 \/ E20 \/ E21 \/ E31 \/ E39 presence detectors, RT07A01KNX \/ RH07A01KNX thermostats, TC28A01KNX fan-coil controller, AD84C01KNX analog\/digital module.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_AD84C01KNXFI000010101_datasheet_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559256101120,"sku":"TS01B04ACC","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01B01ACC-3.jpg?v=1791475512"},{"product_id":"eelectron-ts01c01acc-external-temperature-probe-metal-case-1-pcs","title":"Eelectron TS01C01ACC External Temperature Probe - Metal Case - 1 Pcs","description":"\u003cp\u003eThe Eelectron TS01C01ACC is an external NTC temperature probe in a metal case, sold singly, for the analog inputs of Eelectron KNX devices. With a −40…+105 °C (−40…+221 °F) range and ±1 % tolerance it is the probe for pipe and immersion-well measurement on heating and chilled-water circuits, fan-coil supply\/return sensing, and anywhere a plastic room probe would not survive.\u003c\/p\u003e\n\u003cp\u003eWired to the NTC input of a TC28A01KNX fan-coil controller, an RT07\/RH07 thermostat, a presence detector or an AD84C01KNX module, it lets the device publish the temperature or run its PI thermostat on water temperature. Up to 30 m (98 ft) twisted cable; keep ≥ 3 mm from live conductors.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExternal NTC temperature probe with metal sensing case, 1 piece\u003c\/li\u003e\n\u003cli\u003eMeasuring range −40…+105 °C (−40…+221 °F)\u003c\/li\u003e\n\u003cli\u003eNTC resistance tolerance ±1 % — the tightest of the Eelectron probe range\u003c\/li\u003e\n\u003cli\u003e2-wire lead with double insulation, black cable, metal NTC tip\u003c\/li\u003e\n\u003cli\u003eFor the analog NTC inputs of Eelectron KNX devices; max. 30 m (98 ft) twisted cable\u003c\/li\u003e\n\u003cli\u003ePassive sensor — no power supply, no bus load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eExternal NTC temperature probe, metal case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring range\u003c\/td\u003e\n\u003ctd\u003e−40…+105 °C (−40…+221 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003eNTC resistance ±1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003e2-wire, double insulation, black; metal NTC case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eAnalog NTC input of the host device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClearance from live parts\u003c\/td\u003e\n\u003ctd\u003e≥ 3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with NTC probe input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.11 kg (0.24 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01C01ACC \/ 8054144528014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eOther probes: TS01A04ACC (−20…+100 °C, pack of 4), TS01B04ACC (−50…+60 °C, pack of 4), TS01D01ACC-1 \/ -3 (9025 wall probe, −5…+45 °C). Typical hosts: TC28A01KNX fan-coil controller, RT07A01KNX \/ RH07A01KNX thermostats, PD00E01KNX \/ E02 \/ E03 \/ E31 \/ E39 presence detectors, AD84C01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_TC28A01KNXFI00010104_datasheet_A3__KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259443456,"sku":"TS01C01ACC","price":14.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/knxsupply-placeholder-v2.png?v=1791469099"},{"product_id":"eelectron-ts01d01acc-1-9025-temperature-probe-white","title":"Eelectron TS01D01ACC-1 9025 Temperature Probe - White","description":"\u003cp\u003eThe Eelectron TS01D01ACC-1 is the 9025-series wall temperature probe in white for a 2-module flush box. It is a passive NTC sensor in the same glass-fronted format as the 9025 capacitive thermostats, so a bedroom, bathroom or second zone gets a design-matched temperature pick-up wired to the analog NTC input of any Eelectron KNX device — no extra bus device needed.\u003c\/p\u003e\n\u003cp\u003eIt is used with the 2-module glass cover (9025GS00A01 for this finish; 9025GS00A03 for the other) over up to 30 m (98 ft) of twisted cable; the element measures −5…+45 °C (23…113 °F). The black version is TS01D01ACC-3.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9025-series wall temperature probe for a 2-module box, matching the 9025 capacitive thermostat look\u003c\/li\u003e\n\u003cli\u003eNTC element, measuring range −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/li\u003e\n\u003cli\u003eConnects to the analog NTC input of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 6 mm from live conductors\u003c\/li\u003e\n\u003cli\u003eUsed with glass cover 9025GS00A01 (ordered separately)\u003c\/li\u003e\n\u003cli\u003ePC-ABS body, IP20; indoor, dry places; approx. 100 g (190 g with glass)\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWall temperature probe, 9025 series, 2-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003eNTC, −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eRear input of the connected device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with analog NTC input (e.g. RT07A01KNX, RH07A01KNX, PD00E0x\/E1x\/E2x\/E3x, TC28A01KNX, AD84C01KNX, IO04F01KNX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass cover\u003c\/td\u003e\n\u003ctd\u003e9025GS00A01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure \/ protection\u003c\/td\u003e\n\u003ctd\u003ePC-ABS; IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−5…+45 °C; storage −20…+55 °C; max. 90 % RH non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e96 × 96 × 36 mm (3.8 × 3.8 × 1.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg (0.22 lb) (datasheet: approx. 100 g, 190 g with glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC-1 \/ 8054144522036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eTS01D01ACC-3 (black). Glass covers: 9025GS00A01 (white), 9025GS00A03 (black). 3-module version: TS01D01ACC-1-3M \/ TS01D01ACC-3-3M. Other probes: TS01A04ACC (−20…+100 °C, pack of 4), TS01B04ACC (−50…+60 °C, pack of 4), TS01C01ACC (metal case, −40…+105 °C). Thermostats of the same design: RT07A01KNX-1 \/ -3, RH07A01KNX-1 \/ -3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259508992,"sku":"TS01D01ACC-1","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01D01ACC-1-6.jpg?v=1791475737"},{"product_id":"eelectron-ts01d01acc-1-3m-temperature-sensor-9025-3-module-white","title":"Eelectron TS01D01ACC-1-3M Temperature Sensor 9025 3-module – white","description":"\u003cp\u003eThe Eelectron TS01D01ACC-1-3M is the 9025-series wall temperature probe in white for a 3-module flush box. It is a passive NTC sensor in the same glass-fronted format as the 9025 capacitive thermostats, so a bedroom, bathroom or second zone gets a design-matched temperature pick-up wired to the analog NTC input of any Eelectron KNX device — no extra bus device needed.\u003c\/p\u003e\n\u003cp\u003eIt is used with the 3-module glass cover (9025GS300A01 for this finish; 9025GS300A03 for the other) over up to 30 m (98 ft) of twisted cable; the element measures −5…+45 °C (23…113 °F). The black version is TS01D01ACC-3-3M.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9025-series wall temperature probe for a 3-module box, matching the 9025 capacitive thermostat look\u003c\/li\u003e\n\u003cli\u003eNTC element, measuring range −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/li\u003e\n\u003cli\u003eConnects to the analog NTC input of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 6 mm from live conductors\u003c\/li\u003e\n\u003cli\u003eUsed with glass cover 9025GS300A01 (ordered separately)\u003c\/li\u003e\n\u003cli\u003ePC-ABS body, IP20; indoor, dry places; approx. 100 g (190 g with glass)\u003c\/li\u003e\n\u003cli\u003eFinish: white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWall temperature probe, 9025 series, 3-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003eNTC, −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eRear input of the connected device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with analog NTC input (e.g. RT07A01KNX, RH07A01KNX, PD00E0x\/E1x\/E2x\/E3x, TC28A01KNX, AD84C01KNX, IO04F01KNX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass cover\u003c\/td\u003e\n\u003ctd\u003e9025GS300A01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure \/ protection\u003c\/td\u003e\n\u003ctd\u003ePC-ABS; IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−5…+45 °C; storage −20…+55 °C; max. 90 % RH non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e126 × 96 mm (5.0 × 3.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg (0.22 lb) (datasheet: approx. 100 g, 190 g with glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC-1-3M \/ 8054144522043\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eTS01D01ACC-3-3M (black). Glass covers: 9025GS300A01 (white), 9025GS300A03 (black). 2-module version: TS01D01ACC-1 \/ TS01D01ACC-3. Other probes: TS01A04ACC (−20…+100 °C, pack of 4), TS01B04ACC (−50…+60 °C, pack of 4), TS01C01ACC (metal case, −40…+105 °C). Thermostats of the same design: RT07A01KNX-1 \/ -3, RH07A01KNX-1 \/ -3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259541760,"sku":"TS01D01ACC-1-3M","price":32.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01D01ACC-1-7.jpg?v=1791475738"},{"product_id":"eelectron-ts01d01acc-3-9025-temperature-probe-black","title":"Eelectron TS01D01ACC-3 9025 Temperature Probe - Black","description":"\u003cp\u003eThe Eelectron TS01D01ACC-3 is the 9025-series wall temperature probe in black for a 2-module flush box. It is a passive NTC sensor in the same glass-fronted format as the 9025 capacitive thermostats, so a bedroom, bathroom or second zone gets a design-matched temperature pick-up wired to the analog NTC input of any Eelectron KNX device — no extra bus device needed.\u003c\/p\u003e\n\u003cp\u003eIt is used with the 2-module glass cover (9025GS00A03 for this finish; 9025GS00A01 for the other) over up to 30 m (98 ft) of twisted cable; the element measures −5…+45 °C (23…113 °F). The white version is TS01D01ACC-1.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9025-series wall temperature probe for a 2-module box, matching the 9025 capacitive thermostat look\u003c\/li\u003e\n\u003cli\u003eNTC element, measuring range −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/li\u003e\n\u003cli\u003eConnects to the analog NTC input of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 6 mm from live conductors\u003c\/li\u003e\n\u003cli\u003eUsed with glass cover 9025GS00A03 (ordered separately)\u003c\/li\u003e\n\u003cli\u003ePC-ABS body, IP20; indoor, dry places; approx. 100 g (190 g with glass)\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWall temperature probe, 9025 series, 2-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003eNTC, −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eRear input of the connected device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with analog NTC input (e.g. RT07A01KNX, RH07A01KNX, PD00E0x\/E1x\/E2x\/E3x, TC28A01KNX, AD84C01KNX, IO04F01KNX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass cover\u003c\/td\u003e\n\u003ctd\u003e9025GS00A03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure \/ protection\u003c\/td\u003e\n\u003ctd\u003ePC-ABS; IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−5…+45 °C; storage −20…+55 °C; max. 90 % RH non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e96 × 96 × 36 mm (3.8 × 3.8 × 1.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg (0.22 lb) (datasheet: approx. 100 g, 190 g with glass)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC-3 \/ 8054144522050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eTS01D01ACC-1 (white). Glass covers: 9025GS00A01 (white), 9025GS00A03 (black). 3-module version: TS01D01ACC-1-3M \/ TS01D01ACC-3-3M. Other probes: TS01A04ACC (−20…+100 °C, pack of 4), TS01B04ACC (−50…+60 °C, pack of 4), TS01C01ACC (metal case, −40…+105 °C). Thermostats of the same design: RT07A01KNX-1 \/ -3, RH07A01KNX-1 \/ -3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259705600,"sku":"TS01D01ACC-3","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01D01ACC-3-6.jpg?v=1791475738"},{"product_id":"eelectron-ts01d01acc-3-3m-temperature-sensor-9025-3-module-black","title":"Eelectron TS01D01ACC-3-3M Temperature Sensor 9025 3-module – black","description":"\u003cp\u003eThe Eelectron TS01D01ACC-3-3M is the 9025-series wall temperature probe in black for a 3-module flush box. It is a passive NTC sensor in the same glass-fronted format as the 9025 capacitive thermostats, so a bedroom, bathroom or second zone gets a design-matched temperature pick-up wired to the analog NTC input of any Eelectron KNX device — no extra bus device needed.\u003c\/p\u003e\n\u003cp\u003eIt is used with the 3-module glass cover (9025GS300A03 for this finish; 9025GS300A01 for the other) over up to 30 m (98 ft) of twisted cable; the element measures −5…+45 °C (23…113 °F). The white version is TS01D01ACC-1-3M.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9025-series wall temperature probe for a 3-module box, matching the 9025 capacitive thermostat look\u003c\/li\u003e\n\u003cli\u003eNTC element, measuring range −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/li\u003e\n\u003cli\u003eConnects to the analog NTC input of Eelectron KNX devices; max. 30 m (98 ft) twisted cable; keep ≥ 6 mm from live conductors\u003c\/li\u003e\n\u003cli\u003eUsed with glass cover 9025GS300A03 (ordered separately)\u003c\/li\u003e\n\u003cli\u003ePC-ABS body, IP20; indoor, dry places; approx. 100 g (190 g with glass)\u003c\/li\u003e\n\u003cli\u003eFinish: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eWall temperature probe, 9025 series, 3-module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor\u003c\/td\u003e\n\u003ctd\u003eNTC, −5…+45 °C (23…113 °F), tolerance ±2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eRear input of the connected device; max. 30 m (98 ft) twisted cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eEelectron KNX devices with analog NTC input (e.g. RT07A01KNX, RH07A01KNX, PD00E0x\/E1x\/E2x\/E3x, TC28A01KNX, AD84C01KNX, IO04F01KNX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGlass cover\u003c\/td\u003e\n\u003ctd\u003e9025GS300A03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure \/ protection\u003c\/td\u003e\n\u003ctd\u003ePC-ABS; IP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e−5…+45 °C; storage −20…+55 °C; max. 90 % RH non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e126 × 96 mm (5.0 × 3.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.1 kg (0.22 lb); 190 g (0.42 lb) with glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eTS01D01ACC-3-3M \/ 8054144522067\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eTS01D01ACC-1-3M (white). Glass covers: 9025GS300A01 (white), 9025GS300A03 (black). 2-module version: TS01D01ACC-1 \/ TS01D01ACC-3. Other probes: TS01A04ACC (−20…+100 °C, pack of 4), TS01B04ACC (−50…+60 °C, pack of 4), TS01C01ACC (metal case, −40…+105 °C). Thermostats of the same design: RT07A01KNX-1 \/ -3, RH07A01KNX-1 \/ -3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The Eelectron KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_9025_TS01D01ACC_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259738368,"sku":"TS01D01ACC-3-3M","price":32.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/TS01D01ACC-3-7.jpg?v=1791475740"},{"product_id":"eelectron-wg00a01acc-knx-connector-red-black-100-pz","title":"Eelectron WG00A01ACC KNX Connector Red\/Black 100 Pz.","description":"\u003cp\u003eThe Eelectron WG00A01ACC is a bag of 100 red\/black KNX bus connectors — the standard push-in (WAGO-type) terminal used to connect the KNX TP bus to every device and to branch the line in junction boxes. Each connector takes up to 4 pairs of 0.6–0.8 mm solid conductors by direct plug-in, so a device can be looped in and out and a spur added without screw terminals or splices, and a device can be unplugged for replacement without interrupting the line.\u003c\/p\u003e\n\u003cp\u003eThe red\/black colour coding matches the KNX cable pair and the polarity marking on Eelectron devices; 100 pieces per pack cover a typical floor or small project. Use with Eelectron CV00A01KNX \/ CV00A02KNX bus cable.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRed\/black KNX bus connector, 100 pieces per pack\u003c\/li\u003e\n\u003cli\u003eDirect plug-in (push-in) connection, no tools\u003c\/li\u003e\n\u003cli\u003eUp to 4 conductor pairs per connector — device connection plus branch terminal in one\u003c\/li\u003e\n\u003cli\u003ePolarity colour-coded to the KNX red\/black pair\u003c\/li\u003e\n\u003cli\u003eAllows device removal without breaking the bus line\u003c\/li\u003e\n\u003cli\u003eFor KNX TP bus cable 0.8 mm (20 AWG) such as CV00A01KNX \/ CV00A02KNX\u003c\/li\u003e\n\u003cli\u003ePassive part — no electrical rating beyond the KNX SELV bus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKNX bus connector, red\/black, push-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e100 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductors\u003c\/td\u003e\n\u003ctd\u003eUp to 4 pairs per connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eRed \/ black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eAll KNX TP devices with standard bus terminal; KNX bus cable 0.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.09 kg (0.20 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eWG00A01ACC \/ 8054144528038\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eKNX bus cable CV00A01KNX (1×2×0.8, 100 m) and CV00A02KNX (2×2×0.8, 100 m). Signalling LEDs LD00A01ACC \/ LD00A11ACC.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The KNX device it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259771136,"sku":"WG00A01ACC","price":104.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/knxsupply-placeholder-v2.png?v=1791469099"},{"product_id":"eelectron-ad84c01knx-analog-digital-module-8-way-4-led-outputs","title":"Eelectron AD84C01KNX Analog-Digital Module 8-way, 4 LED outputs","description":"\u003cp\u003eThe Eelectron AD84C01KNX is an in-wall KNX multifunction module with 4 digital inputs, 4 digital\/analog inputs and 4 LED outputs in a 43 x 36 x 24 mm housing that disappears behind a switch plate. It connects conventional pushbuttons, window contacts and NTC probes to the bus and drives low-current indicator LEDs, which makes it the standard way to KNX-enable a hotel bathroom, a corridor or a retrofit room with existing switches.\u003c\/p\u003e\n\u003cp\u003eThe four analog-capable inputs take TS01A01ACC or TS01B01ACC probes on runs up to 20 m, and up to 4 complete thermostat modules run inside the device for towel rails, radiators or fan coils; 5 logic blocks are available for local automation. Connections are 18 cm AWG24 flying leads, and the module draws no more than 10 mA from the bus.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 digital inputs + 4 digital\/analog inputs for pushbuttons, contacts and NTC probes\u003c\/li\u003e\n\u003cli\u003e4 LED outputs (0.3 mA) for LD00A01ACC \/ LD00A11ACC indicator LEDs\u003c\/li\u003e\n\u003cli\u003eNTC probes TS01A01ACC \/ TS01B01ACC on analog inputs, cable up to 20 m (66 ft)\u003c\/li\u003e\n\u003cli\u003eUp to 4 thermostat modules with PI control\u003c\/li\u003e\n\u003cli\u003e5 logic blocks\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 10 mA; 18 cm AWG24 leads\u003c\/li\u003e\n\u003cli\u003e43 x 36 x 24 mm, approx. 40 g; 250 group addresses \/ 250 associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–32 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 digital + 4 digital\/analog (NTC TS01A01ACC \/ TS01B01ACC, max 20 m (66 ft))\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutputs\u003c\/td\u003e\n\u003ctd\u003e4 LED outputs, 0.3 mA (LD00A01ACC \/ LD00A11ACC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermostat modules \/ logic blocks\u003c\/td\u003e\n\u003ctd\u003e4 \/ 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003eFlying leads 18 cm (7 in), AWG24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e250 \/ 250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount box behind switch plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e43 x 36 x 24 mm (1.69 x 1.42 x 0.94 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eAD84C01KNX in-wall module application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.05 kg (0.11 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eAD84C01KNX \/ 8054144520841\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eAccessories: TS01A01ACC \/ TS01B01ACC probes; LD00A01ACC \/ LD00A11ACC LEDs. Input-only in-wall interfaces: IO22D02KNX, IO44D02KNX, IO62D02KNX. With relay outputs: IO42E01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_AD84C01KNXFI000010101_datasheet_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259836672,"sku":"AD84C01KNX","price":98.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/AD84C01KNX.png?v=1791475741"},{"product_id":"eelectron-io22d02knx-knx-push-button-interface-2-way-2-led-outputs","title":"Eelectron IO22D02KNX KNX push-button interface 2-way, 2 LED outputs","description":"\u003cp\u003eThe Eelectron IO22D02KNX is a flush-mount KNX pushbutton interface with 2 dry-contact inputs and 2 LED outputs in a 34 x 34 x 11 mm housing that fits in any wall box behind a conventional switch or pushbutton. It connects standard switches, pushbuttons, magnetic contacts and bedside controls to the bus and drives low-current status LEDs, which is the usual way to bring existing wiring devices into a KNX hotel room or renovated apartment.\u003c\/p\u003e\n\u003cp\u003eEach input can send switching, dimming, shutter, scene or sequence commands with short\/long press detection, the LEDs can follow bus objects or local state, and 16 logic blocks with the Virtual Holder presence function run inside the module. Connection is through a 12-way AWG24 wired connector, and bus consumption stays below 5 mA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 dry-contact inputs for pushbuttons, switches and contacts; cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003e2 LED outputs, 0.5 mA at 3.3 V, for indicator LEDs\u003c\/li\u003e\n\u003cli\u003eInput functions: switching, dimming, shutters, scenes, sequences, short\/long press\u003c\/li\u003e\n\u003cli\u003e16 logic blocks; Virtual Holder logic for hotel-room presence detection\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 5 mA at 21–31 V DC\u003c\/li\u003e\n\u003cli\u003e12-way AWG24 wired connector\u003c\/li\u003e\n\u003cli\u003e34 x 34 x 11 mm, approx. 38 g; 240 group addresses \/ 280 associations\u003c\/li\u003e\n\u003cli\u003eOptional DIN-rail mounting with IOxxD01ACC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–31 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e2 dry-contact; scanning 3.3 V DC; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003e2; 0.5 mA at 3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePlain KNX (secure version: IO44D02KNX-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e12-way wired connector, AWG24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e240 \/ 280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount box; DIN rail with IOxxD01ACC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34 x 34 x 11 mm (1.34 x 1.34 x 0.43 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eIO22D02KNX pushbutton interface application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIO22D02KNX \/ 8054144523132\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eOther versions: IO44D02KNX, IO44D02KNX-S, IO62D02KNX (2 in \/ 2 LED; 4 \/ 4; 4 \/ 4 secure; 6 in \/ 2 LED). DIN-rail adapter: IOxxD01ACC. With NTC probe inputs: AD84C01KNX; with relays and BLE beacon: IO42E01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_IOxxD02KNXFI00010101_Datasheet_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259869440,"sku":"IO22D02KNX","price":56.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IO22D02KNX-1-3.jpg?v=1791475741"},{"product_id":"eelectron-io44d02knx-knx-push-button-interface-4-way-4-led-outputs","title":"Eelectron IO44D02KNX KNX push-button interface 4-way, 4 LED outputs","description":"\u003cp\u003eThe Eelectron IO44D02KNX is a flush-mount KNX pushbutton interface with 4 dry-contact inputs and 4 LED outputs in a 34 x 34 x 11 mm housing that fits in any wall box behind a conventional switch or pushbutton. It connects standard switches, pushbuttons, magnetic contacts and bedside controls to the bus and drives low-current status LEDs, which is the usual way to bring existing wiring devices into a KNX hotel room or renovated apartment.\u003c\/p\u003e\n\u003cp\u003eEach input can send switching, dimming, shutter, scene or sequence commands with short\/long press detection, the LEDs can follow bus objects or local state, and 16 logic blocks with the Virtual Holder presence function run inside the module. Connection is through a 12-way AWG24 wired connector, and bus consumption stays below 5 mA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 dry-contact inputs for pushbuttons, switches and contacts; cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003e4 LED outputs, 0.5 mA at 3.3 V, for indicator LEDs\u003c\/li\u003e\n\u003cli\u003eInput functions: switching, dimming, shutters, scenes, sequences, short\/long press\u003c\/li\u003e\n\u003cli\u003e16 logic blocks; Virtual Holder logic for hotel-room presence detection\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 5 mA at 21–31 V DC\u003c\/li\u003e\n\u003cli\u003e12-way AWG24 wired connector\u003c\/li\u003e\n\u003cli\u003e34 x 34 x 11 mm, approx. 38 g; 240 group addresses \/ 280 associations\u003c\/li\u003e\n\u003cli\u003eOptional DIN-rail mounting with IOxxD01ACC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–31 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 dry-contact; scanning 3.3 V DC; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003e4; 0.5 mA at 3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePlain KNX (secure version: IO44D02KNX-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e12-way wired connector, AWG24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e240 \/ 280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount box; DIN rail with IOxxD01ACC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34 x 34 x 11 mm (1.34 x 1.34 x 0.43 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eIO44D02KNX pushbutton interface application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIO44D02KNX \/ 8054144523149\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eOther versions: IO22D02KNX, IO44D02KNX-S, IO62D02KNX (2 in \/ 2 LED; 4 \/ 4; 4 \/ 4 secure; 6 in \/ 2 LED). DIN-rail adapter: IOxxD01ACC. With NTC probe inputs: AD84C01KNX; with relays and BLE beacon: IO42E01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_IOxxD02KNXFI00010101_Datasheet_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259902208,"sku":"IO44D02KNX","price":60.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IO44D02KNX-3.jpg?v=1791475743"},{"product_id":"eelectron-io44d02knx-s-knx-push-button-interface-4-way-4-led-outputs-secure","title":"Eelectron IO44D02KNX-S KNX push-button interface 4-way, 4 LED outputs, secure","description":"\u003cp\u003eThe Eelectron IO44D02KNX-S is a flush-mount KNX pushbutton interface with 4 dry-contact inputs and 4 LED outputs in a 34 x 34 x 11 mm housing that fits in any wall box behind a conventional switch or pushbutton. It is the KNX Data Secure version of the IO44D02KNX, for projects that require encrypted group communication from the room level up.\u003c\/p\u003e\n\u003cp\u003eEach input can send switching, dimming, shutter, scene or sequence commands with short\/long press detection, the LEDs can follow bus objects or local state, and 16 logic blocks with the Virtual Holder presence function run inside the module. Connection is through a 12-way AWG24 wired connector, and bus consumption stays below 5 mA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 dry-contact inputs for pushbuttons, switches and contacts; cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003e4 LED outputs, 0.5 mA at 3.3 V, for indicator LEDs\u003c\/li\u003e\n\u003cli\u003eInput functions: switching, dimming, shutters, scenes, sequences, short\/long press\u003c\/li\u003e\n\u003cli\u003e16 logic blocks; Virtual Holder logic for hotel-room presence detection\u003c\/li\u003e\n\u003cli\u003eKNX Data Secure\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 5 mA at 21–31 V DC\u003c\/li\u003e\n\u003cli\u003e12-way AWG24 wired connector\u003c\/li\u003e\n\u003cli\u003e34 x 34 x 11 mm, approx. 38 g; 240 group addresses \/ 280 associations\u003c\/li\u003e\n\u003cli\u003eOptional DIN-rail mounting with IOxxD01ACC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–31 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 dry-contact; scanning 3.3 V DC; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003e4; 0.5 mA at 3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003eKNX Data Secure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e12-way wired connector, AWG24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e240 \/ 280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount box; DIN rail with IOxxD01ACC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34 x 34 x 11 mm (1.34 x 1.34 x 0.43 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eIO44D02KNX-S pushbutton interface application with Data Secure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIO44D02KNX-S \/ 8054144523156\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eOther versions: IO22D02KNX, IO44D02KNX, IO62D02KNX (2 in \/ 2 LED; 4 \/ 4; 4 \/ 4 secure; 6 in \/ 2 LED). DIN-rail adapter: IOxxD01ACC. With NTC probe inputs: AD84C01KNX; with relays and BLE beacon: IO42E01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_IOxxD02KNXFI00010101_Datasheet_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559259934976,"sku":"IO44D02KNX-S","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IO44D02KNX-S-1-3.jpg?v=1791475743"},{"product_id":"eelectron-io62d02knx-knx-push-button-interface-6-way-2-led-outputs","title":"Eelectron IO62D02KNX KNX push-button interface 6-way, 2 LED outputs","description":"\u003cp\u003eThe Eelectron IO62D02KNX is a flush-mount KNX pushbutton interface with 6 dry-contact inputs and 2 LED outputs in a 34 x 34 x 11 mm housing that fits in any wall box behind a conventional switch or pushbutton. It connects standard switches, pushbuttons, magnetic contacts and bedside controls to the bus and drives low-current status LEDs, which is the usual way to bring existing wiring devices into a KNX hotel room or renovated apartment.\u003c\/p\u003e\n\u003cp\u003eEach input can send switching, dimming, shutter, scene or sequence commands with short\/long press detection, the LEDs can follow bus objects or local state, and 16 logic blocks with the Virtual Holder presence function run inside the module. Connection is through a 12-way AWG24 wired connector, and bus consumption stays below 5 mA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 dry-contact inputs for pushbuttons, switches and contacts; cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003e2 LED outputs, 0.5 mA at 3.3 V, for indicator LEDs\u003c\/li\u003e\n\u003cli\u003eInput functions: switching, dimming, shutters, scenes, sequences, short\/long press\u003c\/li\u003e\n\u003cli\u003e16 logic blocks; Virtual Holder logic for hotel-room presence detection\u003c\/li\u003e\n\u003cli\u003eBus-powered, ≤ 5 mA at 21–31 V DC\u003c\/li\u003e\n\u003cli\u003e12-way AWG24 wired connector\u003c\/li\u003e\n\u003cli\u003e34 x 34 x 11 mm, approx. 38 g; 240 group addresses \/ 280 associations\u003c\/li\u003e\n\u003cli\u003eOptional DIN-rail mounting with IOxxD01ACC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eVia KNX bus, 21–31 V DC (SELV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e6 dry-contact; scanning 3.3 V DC; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003e2; 0.5 mA at 3.3 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\u003ctd\u003ePlain KNX (secure version: IO44D02KNX-S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic blocks\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e12-way wired connector, AWG24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGroup addresses \/ associations\u003c\/td\u003e\n\u003ctd\u003e240 \/ 280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount box; DIN rail with IOxxD01ACC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34 x 34 x 11 mm (1.34 x 1.34 x 0.43 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eIP20 (EN 60529)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-5 °C to +45 °C (23 °F to 113 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +55 °C (-4 °F to 131 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative humidity\u003c\/td\u003e\n\u003ctd\u003emax 90 % non-condensing, indoor use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eEN 63044-3; EN 63044-5-1 \/ EN 63044-5-2; EN 50491-2; LVD 2014\/35\/EU; EMC 2014\/30\/EU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eKNX certified; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eIO62D02KNX pushbutton interface application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIO62D02KNX \/ 8054144523163\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eOther versions: IO22D02KNX, IO44D02KNX, IO44D02KNX-S (2 in \/ 2 LED; 4 \/ 4; 4 \/ 4 secure; 6 in \/ 2 LED). DIN-rail adapter: IOxxD01ACC. With NTC probe inputs: AD84C01KNX; with relays and BLE beacon: IO42E01KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_IOxxD02KNXFI00010101_Datasheet_A4_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263506688,"sku":"IO62D02KNX","price":92.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IO62D02KNX-1-3.jpg?v=1791475954"},{"product_id":"eelectron-ioxxd01acc-accessories-din-rail-mounting-4-pieces","title":"Eelectron IOxxD01ACC Accessories - DIN Rail Mounting 4 pieces","description":"\u003cp\u003eThe Eelectron IOxxD01ACC is a DIN-rail mounting accessory for the IO22D02KNX, IO44D02KNX, IO44D02KNX-S and IO62D02KNX flush-mount pushbutton interfaces. It lets the small in-wall modules be fixed on a 35 mm rail inside a distribution board or a hotel-room sub-panel instead of a wall box, which is convenient when the inputs are wired centrally.\u003c\/p\u003e\n\u003cp\u003eThe accessory is a white plastic clip supplied in packs of 4 pieces; no electrical connection is involved.\u003c\/p\u003e\n\u003cp\u003eThe clip snaps onto the rail and holds one interface module; four clips per pack allow a typical sub-panel of several interfaces to be fitted neatly, with the 12-way connectors accessible for wiring.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDIN-rail (35 mm) holder for IOxxD02KNX pushbutton interfaces\u003c\/li\u003e\n\u003cli\u003ePack of 4 pieces, white\u003c\/li\u003e\n\u003cli\u003eCompatible with IO22D02KNX, IO44D02KNX, IO44D02KNX-S, IO62D02KNX\u003c\/li\u003e\n\u003cli\u003ePassive mechanical accessory\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDIN-rail mounting clip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eIO22D02KNX, IO44D02KNX, IO44D02KNX-S, IO62D02KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack\u003c\/td\u003e\n\u003ctd\u003e4 pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eIOxxD01ACC \/ 8054144525471\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eInterfaces: IO22D02KNX, IO44D02KNX, IO44D02KNX-S, IO62D02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAvailable to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263539456,"sku":"IOxxD01ACC","price":40.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/IOxxD01ACC-3.jpg?v=1791475955"},{"product_id":"eelectron-pb40a01dl2-dali-push-button-interface-4-fold","title":"Eelectron PB40A01DL2 DALI push-button interface 4-fold","description":"\u003cp\u003eThe Eelectron PB40A01DL2 is a DALI-2 pushbutton interface with 4 dry-contact inputs, powered from the DALI line, for connecting conventional pushbuttons to a DALI-2 application controller such as the Eelectron IC01D03DAL. It is certified to IEC 62386-301 (push buttons) and -332 (feedback), so wall switches, bedside buttons and door contacts can control DALI lighting without a KNX device in the room.\u003c\/p\u003e\n\u003cp\u003eBus load is at most 6 mA, so many interfaces fit on one line. The 34.7 x 34.7 x 12 mm module sits in the wall box behind the switch, inputs may run up to 10 m, and it operates from 0 to +50 °C.\u003c\/p\u003e\n\u003cp\u003eEach input is assigned in the application controller to DALI groups, scenes or individual control gear, so a single 4-button plate can switch, dim and recall scenes for a room. The interface is powered entirely from the DALI line and requires no mains or KNX connection in the wall box, which keeps the room wiring simple in offices and hotel rooms that run a DALI-2 lighting system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 dry-contact inputs for pushbuttons and switches, cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003eDALI-2 certified input device: IEC 62386-301 (push buttons) and -332 (feedback)\u003c\/li\u003e\n\u003cli\u003eMulti-master operation on the DALI-2 line\u003c\/li\u003e\n\u003cli\u003ePowered from the DALI line, 9.5–22.4 V DC\u003c\/li\u003e\n\u003cli\u003eDALI bus load ≤ 6 mA\u003c\/li\u003e\n\u003cli\u003e34.7 x 34.7 x 12 mm NY6 housing, approx. 40 g, for standard wall boxes\u003c\/li\u003e\n\u003cli\u003eOperating temperature 0 to +50 °C (32 to 122 °F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eFrom DALI line, 9.5–22.4 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption (DALI)\u003c\/td\u003e\n\u003ctd\u003e≤ 6 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 dry-contact; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eIEC 62386-101\/103, -301, -332 (DALI-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount wall box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34.7 x 34.7 x 12 mm (1.37 x 1.37 x 0.47 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNY6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +50 °C (32 °F to 122 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eDALI-2; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eNone (DALI-2 device, configured by the application controller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003ePB40A01DL2 \/ 8054144522593\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eSibling: PB44A01DL2 (adds 4 LED outputs). DALI-2 application controller with input support: IC01D03DAL. DALI line repeater: LR00A01DAL. KNX-side pushbutton interfaces: IO22D02KNX \/ IO44D02KNX \/ IO62D02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_PB4xA01DL2FI00010201_datasheet_A5_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263572224,"sku":"PB40A01DL2","price":67.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/pb40a01dl2-3.jpg?v=1791475956"},{"product_id":"eelectron-pb44a01dl2-dali-push-button-interface-4-way-4-led-outputs","title":"Eelectron PB44A01DL2 DALI push-button interface 4-way, 4 LED outputs","description":"\u003cp\u003eThe Eelectron PB44A01DL2 is a DALI-2 pushbutton interface with 4 dry-contact inputs and 4 LED outputs, powered from the DALI line, for connecting conventional pushbuttons to a DALI-2 application controller such as the Eelectron IC01D03DAL. It is certified to IEC 62386-301 (push buttons) and -332 (feedback), so wall switches, bedside buttons and door contacts can control DALI lighting without a KNX device in the room.\u003c\/p\u003e\n\u003cp\u003eThe four LED outputs give status feedback on the pushbuttons and are powered from an external 24 V supply, keeping the DALI bus load at 10 mA or less. The 34.7 x 34.7 x 12 mm module sits in the wall box behind the switch, inputs may run up to 10 m, and it operates from 0 to +50 °C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 dry-contact inputs for pushbuttons and switches, cable up to 10 m (33 ft)\u003c\/li\u003e\n\u003cli\u003eDALI-2 certified input device: IEC 62386-301 (push buttons) and -332 (feedback)\u003c\/li\u003e\n\u003cli\u003eMulti-master operation on the DALI-2 line\u003c\/li\u003e\n\u003cli\u003ePowered from the DALI line, 9.5–22.4 V DC\u003c\/li\u003e\n\u003cli\u003e4 LED outputs for status feedback; external 24 V supply (+V24) for the LEDs\u003c\/li\u003e\n\u003cli\u003eDALI bus load ≤ 10 mA with LEDs on\u003c\/li\u003e\n\u003cli\u003e34.7 x 34.7 x 12 mm NY6 housing, approx. 40 g, for standard wall boxes\u003c\/li\u003e\n\u003cli\u003eOperating temperature 0 to +50 °C (32 to 122 °F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eFrom DALI line, 9.5–22.4 V DC; LEDs from external 24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption (DALI)\u003c\/td\u003e\n\u003ctd\u003e≤ 10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs\u003c\/td\u003e\n\u003ctd\u003e4 dry-contact; max cable 10 m (33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED outputs\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eIEC 62386-101\/103, -301, -332 (DALI-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mount wall box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e34.7 x 34.7 x 12 mm (1.37 x 1.37 x 0.47 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNY6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e0 °C to +50 °C (32 °F to 122 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eDALI-2; CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eETS application\u003c\/td\u003e\n\u003ctd\u003eNone (DALI-2 device, configured by the application controller)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net)\u003c\/td\u003e\n\u003ctd\u003e0.04 kg (0.09 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003ePB44A01DL2 \/ 8054144522609\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eSibling: PB40A01DL2 (inputs only). DALI-2 application controller with input support: IC01D03DAL. DALI line repeater: LR00A01DAL. KNX-side pushbutton interfaces: IO22D02KNX \/ IO44D02KNX \/ IO62D02KNX.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_PB4xA01DL2FI00010201_datasheet_A5_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263670528,"sku":"PB44A01DL2","price":77.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Unknown-3.jpg?v=1791475957"},{"product_id":"eelectron-bk04fx-0030-keypad-set-4-pieces-fenix-white-0030","title":"Eelectron BK04FX-0030 Keypad Set 4 pieces – Fenix White 0030","description":"\u003cp\u003eThe Eelectron BK04FX-0030 is the 4-button kit in FENIX Bianco Alaska 0030 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0030 \/ 8054144523767\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0030, BK24FX-0030, BK42FX-0030. Other FENIX colours: BK04FX-0032, BK04FX-0720, BK04FX-0724, BK04FX-0748, BK04FX-0754. Matching frames: PO71A01FX-0030, PO71A03FX-0030, PO71A71FX-0030. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263703296,"sku":"BK04FX-0030","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0030-3.jpg?v=1791475958"},{"product_id":"eelectron-bk04fx-0032-keypad-set-4-pieces-fenix-white-0032","title":"Eelectron BK04FX-0032 Keypad Set 4 pieces – Fenix White 0032","description":"\u003cp\u003eThe Eelectron BK04FX-0032 is the 4-button kit in FENIX Bianco Kos 0032 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0032 \/ 8054144523774\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0032, BK24FX-0032, BK42FX-0032. Other FENIX colours: BK04FX-0030, BK04FX-0720, BK04FX-0724, BK04FX-0748, BK04FX-0754. Matching frames: PO71A01FX-0032, PO71A03FX-0032, PO71A71FX-0032. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263736064,"sku":"BK04FX-0032","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0032-3.jpg?v=1791475958"},{"product_id":"eelectron-bk04fx-0720-keypad-4-pieces-fenix-black-0720","title":"Eelectron BK04FX-0720 Keypad 4 pieces – Fenix Black 0720","description":"\u003cp\u003eThe Eelectron BK04FX-0720 is the 4-button kit in FENIX Nero Ingo 0720 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0720 \/ 8054144523781\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0720, BK24FX-0720, BK42FX-0720. Other FENIX colours: BK04FX-0030, BK04FX-0032, BK04FX-0724, BK04FX-0748, BK04FX-0754. Matching frames: PO71A01FX-0720, PO71A03FX-0720, PO71A71FX-0720. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263768832,"sku":"BK04FX-0720","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0720-3.jpg?v=1791475959"},{"product_id":"eelectron-bk04fx-0724-keypad-set-4-pieces-fenix-grey-0724","title":"Eelectron BK04FX-0724 Keypad Set 4 pieces – Fenix Grey 0724","description":"\u003cp\u003eThe Eelectron BK04FX-0724 is the 4-button kit in FENIX Grigio Londra 0724 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0724 \/ 8054144523798\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0724, BK24FX-0724, BK42FX-0724. Other FENIX colours: BK04FX-0030, BK04FX-0032, BK04FX-0720, BK04FX-0748, BK04FX-0754. Matching frames: PO71A01FX-0724, PO71A03FX-0724, PO71A71FX-0724. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263801600,"sku":"BK04FX-0724","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0724-3.jpg?v=1791475960"},{"product_id":"eelectron-bk04fx-0748-keypad-4-pieces-fenix-beige-0748","title":"Eelectron BK04FX-0748 Keypad 4 pieces – Fenix Beige 0748","description":"\u003cp\u003eThe Eelectron BK04FX-0748 is the 4-button kit in FENIX Beige Luxor 0748 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0748 \/ 8054144523804\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0748, BK24FX-0748, BK42FX-0748. Other FENIX colours: BK04FX-0030, BK04FX-0032, BK04FX-0720, BK04FX-0724, BK04FX-0754. Matching frames: PO71A01FX-0748, PO71A03FX-0748, PO71A71FX-0748. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263834368,"sku":"BK04FX-0748","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0748-3.jpg?v=1791475962"},{"product_id":"eelectron-bk04fx-0754-keypad-set-4-pieces-fenix-blue-0754","title":"Eelectron BK04FX-0754 Keypad Set 4 pieces – Fenix Blue 0754","description":"\u003cp\u003eThe Eelectron BK04FX-0754 is the 4-button kit in FENIX Blu Fes 0754 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Blu Fes 0754 (a saturated matte Fes blue): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Blu Fes 0754 (a saturated matte Fes blue)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Blu Fes 0754 (a saturated matte Fes blue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04FX-0754 \/ 8054144523811\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08FX-0754, BK24FX-0754, BK42FX-0754. Other FENIX colours: BK04FX-0030, BK04FX-0032, BK04FX-0720, BK04FX-0724, BK04FX-0748. Matching frames: PO71A01FX-0754, PO71A03FX-0754, PO71A71FX-0754. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559263867136,"sku":"BK04FX-0754","price":65.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT4_BK04FX-0754-3.jpg?v=1791475962"},{"product_id":"eelectron-bk04mt-sh-keypad-set-4-pieces-metal-silver","title":"Eelectron BK04MT-SH Keypad Set 4 pieces – Metal Silver","description":"\u003cp\u003eThe Eelectron BK04MT-SH is the 4-button kit in metal silver for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is metal, silver (MT-SH), the OL-U Metal Edition, pairing with the PO71A01MT-SH \/ PO71A03MT-SH silver cover frames for an all-metal wall control in offices, lobbies and premium residences.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: metal, silver (MT-SH)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003emetal, silver (MT-SH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003emetal, silver finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04MT-SH \/ 8054144523859\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in metal silver: BK08MT-SH, BK24MT-SH, BK42MT-SH. Matching frames: PO71A01MT-SH, PO71A03MT-SH, PO71A71MT-SH; socket companions PO45A01MT-SH, PO55A01MT-SH. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267602688,"sku":"BK04MT-SH","price":72.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Metal_KIT4_BK04MT-SH-3.jpg?v=1791476174"},{"product_id":"eelectron-bk04pll-1-keypad-4-pieces-white-plastic","title":"Eelectron BK04PLL-1 Keypad 4 pieces – White plastic","description":"\u003cp\u003eThe Eelectron BK04PLL-1 is the 4-button kit in white for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, white, the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, white\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04PLL-1 \/ 8054144523866\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08PLL-1, BK24PLL-1, BK42PLL-1. Other colours: BK04PLL-3, BK04PLL-4. Matching frames: PO71A01PL-1, PO71A03PL-1, PO71A71PL-1. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267635456,"sku":"BK04PLL-1","price":22.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Plastic_KIT4_BK04PLL-1-3.jpg?v=1791476175"},{"product_id":"eelectron-bk04pll-3-keypad-set-4-pieces-black-plastic","title":"Eelectron BK04PLL-3 Keypad Set 4 pieces – Black plastic","description":"\u003cp\u003eThe Eelectron BK04PLL-3 is the 4-button kit in black for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, black, the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, black\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04PLL-3 \/ 8054144523873\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08PLL-3, BK24PLL-3, BK42PLL-3. Other colours: BK04PLL-1, BK04PLL-4. Matching frames: PO71A01PL-3, PO71A03PL-3, PO71A71PL-3. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267700992,"sku":"BK04PLL-3","price":22.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Plastic_KIT4_BK04PLL-3-3.jpg?v=1791476176"},{"product_id":"eelectron-bk04pll-4-keypad-set-4-pieces-helvetia-white-plastic","title":"Eelectron BK04PLL-4 Keypad Set 4 pieces – Helvetia White Plastic","description":"\u003cp\u003eThe Eelectron BK04PLL-4 is the 4-button kit in Helvetia white for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives four full-width buttons, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices), the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 4 buttons (one full-height button per row)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e4 keys: 4 full-width buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK04PLL-4 \/ 8054144523880\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK08PLL-4, BK24PLL-4, BK42PLL-4. Other colours: BK04PLL-1, BK04PLL-3. Matching frames: PO71A01PL-4, PO71A03PL-4, PO71A71PL-4. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267766528,"sku":"BK04PLL-4","price":37.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/20087247_01.jpg?v=1791476177"},{"product_id":"eelectron-bk08fx-0030-keypad-8-pieces-fenix-white-0030","title":"Eelectron BK08FX-0030 Keypad 8 pieces – Fenix White 0030","description":"\u003cp\u003eThe Eelectron BK08FX-0030 is the 8-button kit in FENIX Bianco Alaska 0030 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0030 \/ 8054144523897\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0030, BK24FX-0030, BK42FX-0030. Other FENIX colours: BK08FX-0032, BK08FX-0720, BK08FX-0724, BK08FX-0748, BK08FX-0754. Matching frames: PO71A01FX-0030, PO71A03FX-0030, PO71A71FX-0030. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267799296,"sku":"BK08FX-0030","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0030-3.jpg?v=1791476177"},{"product_id":"eelectron-bk08fx-0032-keypad-8-pieces-fenix-white-0032","title":"Eelectron BK08FX-0032 Keypad 8 pieces – Fenix White 0032","description":"\u003cp\u003eThe Eelectron BK08FX-0032 is the 8-button kit in FENIX Bianco Kos 0032 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0032 \/ 8054144523903\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0032, BK24FX-0032, BK42FX-0032. Other FENIX colours: BK08FX-0030, BK08FX-0720, BK08FX-0724, BK08FX-0748, BK08FX-0754. Matching frames: PO71A01FX-0032, PO71A03FX-0032, PO71A71FX-0032. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267832064,"sku":"BK08FX-0032","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0032-3.jpg?v=1791476178"},{"product_id":"eelectron-bk08fx-0720-keypad-8-pieces-fenix-black-0720","title":"Eelectron BK08FX-0720 Keypad 8 pieces – Fenix Black 0720","description":"\u003cp\u003eThe Eelectron BK08FX-0720 is the 8-button kit in FENIX Nero Ingo 0720 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0720 \/ 8054144523910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0720, BK24FX-0720, BK42FX-0720. Other FENIX colours: BK08FX-0030, BK08FX-0032, BK08FX-0724, BK08FX-0748, BK08FX-0754. Matching frames: PO71A01FX-0720, PO71A03FX-0720, PO71A71FX-0720. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267897600,"sku":"BK08FX-0720","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0720-3.jpg?v=1791476179"},{"product_id":"eelectron-bk08fx-0724-keypad-8-pieces-fenix-grey-0724","title":"Eelectron BK08FX-0724 Keypad 8 pieces – Fenix Grey 0724","description":"\u003cp\u003eThe Eelectron BK08FX-0724 is the 8-button kit in FENIX Grigio Londra 0724 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0724 \/ 8054144523927\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0724, BK24FX-0724, BK42FX-0724. Other FENIX colours: BK08FX-0030, BK08FX-0032, BK08FX-0720, BK08FX-0748, BK08FX-0754. Matching frames: PO71A01FX-0724, PO71A03FX-0724, PO71A71FX-0724. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267930368,"sku":"BK08FX-0724","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0724-3.jpg?v=1791476180"},{"product_id":"eelectron-bk08fx-0748-keypad-8-pieces-fenix-beige-0748","title":"Eelectron BK08FX-0748 Keypad 8 pieces – Fenix Beige 0748","description":"\u003cp\u003eThe Eelectron BK08FX-0748 is the 8-button kit in FENIX Beige Luxor 0748 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Beige Luxor 0748 (a soft matte Luxor beige)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0748 \/ 8054144523934\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0748, BK24FX-0748, BK42FX-0748. Other FENIX colours: BK08FX-0030, BK08FX-0032, BK08FX-0720, BK08FX-0724, BK08FX-0754. Matching frames: PO71A01FX-0748, PO71A03FX-0748, PO71A71FX-0748. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559267963136,"sku":"BK08FX-0748","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0748-3.jpg?v=1791476181"},{"product_id":"eelectron-bk08fx-0754-keypad-8-pieces-fenix-blue-0754","title":"Eelectron BK08FX-0754 Keypad 8 pieces – Fenix Blue 0754","description":"\u003cp\u003eThe Eelectron BK08FX-0754 is the 8-button kit in FENIX Blu Fes 0754 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Blu Fes 0754 (a saturated matte Fes blue): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Blu Fes 0754 (a saturated matte Fes blue)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Blu Fes 0754 (a saturated matte Fes blue)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08FX-0754 \/ 8054144523941\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0754, BK24FX-0754, BK42FX-0754. Other FENIX colours: BK08FX-0030, BK08FX-0032, BK08FX-0720, BK08FX-0724, BK08FX-0748. Matching frames: PO71A01FX-0754, PO71A03FX-0754, PO71A71FX-0754. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559268028672,"sku":"BK08FX-0754","price":84.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08FX-0754-3.jpg?v=1791476182"},{"product_id":"eelectron-bk08mt-sh-keypad-8-pieces-metal-silver","title":"Eelectron BK08MT-SH Keypad 8 pieces – Metal Silver","description":"\u003cp\u003eThe Eelectron BK08MT-SH is the 8-button kit in metal silver for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is metal, silver (MT-SH), the OL-U Metal Edition, pairing with the PO71A01MT-SH \/ PO71A03MT-SH silver cover frames for an all-metal wall control in offices, lobbies and premium residences.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: metal, silver (MT-SH)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003emetal, silver (MT-SH)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003emetal, silver finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08MT-SH \/ 8054144523989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in metal silver: BK04MT-SH, BK24MT-SH, BK42MT-SH. Matching frames: PO71A01MT-SH, PO71A03MT-SH, PO71A71MT-SH; socket companions PO45A01MT-SH, PO55A01MT-SH. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559270846720,"sku":"BK08MT-SH","price":94.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08MT-SH-3.jpg?v=1791476394"},{"product_id":"eelectron-bk08pll-1-keypad-set-8-pieces-white-plastic","title":"Eelectron BK08PLL-1 Keypad Set 8 pieces – White plastic","description":"\u003cp\u003eThe Eelectron BK08PLL-1 is the 8-button kit in white for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, white, the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, white\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08PLL-1 \/ 8054144523996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04PLL-1, BK24PLL-1, BK42PLL-1. Other colours: BK08PLL-3, BK08PLL-4. Matching frames: PO71A01PL-1, PO71A03PL-1, PO71A71PL-1. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559270879488,"sku":"BK08PLL-1","price":40.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08PLL-1-3.jpg?v=1791476395"},{"product_id":"eelectron-bk08pll-3-keypad-set-8-pieces-black-plastic","title":"Eelectron BK08PLL-3 Keypad Set 8 pieces – Black plastic","description":"\u003cp\u003eThe Eelectron BK08PLL-3 is the 8-button kit in black for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, black, the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, black\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08PLL-3 \/ 8054144524009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04PLL-3, BK24PLL-3, BK42PLL-3. Other colours: BK08PLL-1, BK08PLL-4. Matching frames: PO71A01PL-3, PO71A03PL-3, PO71A71PL-3. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559270912256,"sku":"BK08PLL-3","price":40.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/BK08PLL-3-3.jpg?v=1791476395"},{"product_id":"eelectron-bk08pll-4-keypad-set-8-pieces-helvetia-white-plastic","title":"Eelectron BK08PLL-4 Keypad Set 8 pieces – Helvetia White Plastic","description":"\u003cp\u003eThe Eelectron BK08PLL-4 is the 8-button kit in Helvetia white for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is painted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices), the OL-U Regular Version, matching the PO71 painted plastic cover frames in the same colour code (-1 white, -3 black, -4 Helvetia white) for offices, hotels, multi-family and residential retrofits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: painted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003epainted plastic, Helvetia white (the Swiss-standard white tone used by Feller-style wiring devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epainted plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08PLL-4 \/ 8054144524016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04PLL-4, BK24PLL-4, BK42PLL-4. Other colours: BK08PLL-1, BK08PLL-3. Matching frames: PO71A01PL-4, PO71A03PL-4, PO71A71PL-4. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271141632,"sku":"BK08PLL-4","price":46.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/20087273_01.jpg?v=1791476396"},{"product_id":"eelectron-bk08plr-keypad-8-pieces-raw-plastic-opaline","title":"Eelectron BK08PLR Keypad 8 pieces – Raw Plastic Opaline","description":"\u003cp\u003eThe Eelectron BK08PLR is the 8-button kit in raw opaline plastic for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives eight half-width buttons, four rows of two, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is raw opaline plastic (unpainted, translucent-white): an unpainted, light-diffusing key set that lets the button LEDs glow through the whole key — the economical choice for back-of-house areas or keys that will receive a custom finish.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 8 buttons (left\/right half-buttons on all four rows)\u003c\/li\u003e\n\u003cli\u003eFinish: raw opaline plastic (unpainted, translucent-white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e8 keys: 4 left + 4 right half-buttons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eraw opaline plastic (unpainted, translucent-white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eraw opaline plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK08PLR \/ 8054144524023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. BK08PLR is the only raw opaline layout; painted plastic equivalents are BK04PLL-x, BK08PLL-x, BK24PLL-x and BK42PLL-x. Cover frames: PO71A01PL-1\/-3\/-4, PO71A03PL-1\/-3 or the raw-plastic PO71A01RP-1\/-3. Mounting frames: FO71A01-2M, FO71A01-3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271174400,"sku":"BK08PLR","price":12.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/RAW_Plastic_BK08PLR-3.jpg?v=1791476397"},{"product_id":"eelectron-bk24fx-0030-keypad-set-2x-left-4x-right-fenix-white-0030","title":"Eelectron BK24FX-0030 Keypad Set 2x left, 4x right – Fenix White 0030","description":"\u003cp\u003eThe Eelectron BK24FX-0030 is the 2 left + 4 right kit in FENIX Bianco Alaska 0030 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives two full-height rows on the left side and four half-buttons on the right, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 2 left half-buttons and 4 right half-buttons\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e6 keys: 2 left + 4 right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Alaska 0030 (a warm, matte Alaska white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK24FX-0030 \/ 8054144524030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0030, BK08FX-0030, BK42FX-0030. Other FENIX colours: BK24FX-0032, BK24FX-0720, BK24FX-0724, BK24FX-0748, BK24FX-0754. Matching frames: PO71A01FX-0030, PO71A03FX-0030, PO71A71FX-0030. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271207168,"sku":"BK24FX-0030","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT6_Right_BK24FX-0030-3.jpg?v=1791476398"},{"product_id":"eelectron-bk24fx-0032-keypad-2x-left-4x-right-fenix-white-0032","title":"Eelectron BK24FX-0032 Keypad 2x left, 4x right – Fenix White 0032","description":"\u003cp\u003eThe Eelectron BK24FX-0032 is the 2 left + 4 right kit in FENIX Bianco Kos 0032 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives two full-height rows on the left side and four half-buttons on the right, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 2 left half-buttons and 4 right half-buttons\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e6 keys: 2 left + 4 right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Bianco Kos 0032 (a cool, matte Kos white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK24FX-0032 \/ 8054144524047\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0032, BK08FX-0032, BK42FX-0032. Other FENIX colours: BK24FX-0030, BK24FX-0720, BK24FX-0724, BK24FX-0748, BK24FX-0754. Matching frames: PO71A01FX-0032, PO71A03FX-0032, PO71A71FX-0032. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271239936,"sku":"BK24FX-0032","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT6_Right_BK24FX-0032-3.jpg?v=1791476398"},{"product_id":"eelectron-bk24fx-0720-keypad-set-2x-left-4x-right-fenix-black-0720","title":"Eelectron BK24FX-0720 Keypad Set 2x left, 4x right – Fenix Black 0720","description":"\u003cp\u003eThe Eelectron BK24FX-0720 is the 2 left + 4 right kit in FENIX Nero Ingo 0720 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives two full-height rows on the left side and four half-buttons on the right, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 2 left half-buttons and 4 right half-buttons\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e6 keys: 2 left + 4 right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Nero Ingo 0720 (a deep matte Ingo black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK24FX-0720 \/ 8054144524054\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0720, BK08FX-0720, BK42FX-0720. Other FENIX colours: BK24FX-0030, BK24FX-0032, BK24FX-0724, BK24FX-0748, BK24FX-0754. Matching frames: PO71A01FX-0720, PO71A03FX-0720, PO71A71FX-0720. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271272704,"sku":"BK24FX-0720","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT6_Right_BK24FX-BLACK-0720-3.jpg?v=1791476399"},{"product_id":"eelectron-bk24fx-0724-keypad-set-2x-left-4x-right-fenix-grey-0724","title":"Eelectron BK24FX-0724 Keypad Set 2x left, 4x right – Fenix Grey 0724","description":"\u003cp\u003eThe Eelectron BK24FX-0724 is the 2 left + 4 right kit in FENIX Grigio Londra 0724 for the OL-U KNX switch SO08A01KNX (8 buttons, 16 channels, RGB swipe bar, thermostat). SO08A01KNX ships as bare hardware; the key set, a PO71 cover frame and an FO71A01 metal frame are ordered separately to suit the interior. This layout gives two full-height rows on the left side and four half-buttons on the right, each key backed by its own RGB LED and freely programmable in ETS.\u003c\/p\u003e\n\u003cp\u003eThe finish is FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey): the FENIX NTM® nanotech laminate of the OL-U FENIX Edition — very low light reflectivity, soft-touch matte, anti-fingerprint — specified for hospitality and high-end residential work. Pair it with the PO71 FENIX frame in the same colour code.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout: 2 left half-buttons and 4 right half-buttons\u003c\/li\u003e\n\u003cli\u003eFinish: FENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/li\u003e\n\u003cli\u003eSnap-on fit over the device, under the cover frame; individual keys lift out with a flat screwdriver\u003c\/li\u003e\n\u003cli\u003eEach key position backed by a device LED (RGB on SO08A01KNX) and freely assignable in ETS\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the other OL-U key sets — re-dress installed hardware without rewiring\u003c\/li\u003e\n\u003cli\u003eWorks with PO71A01 (2-module), PO71A03 (3-module) and the 71+45 \/ 71+55 \/ 71+71 \/ 71+60 double frames\u003c\/li\u003e\n\u003cli\u003eClean with a soft microfibre cloth and water or neutral soap only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eKey set (button kit) for OL-U KNX wall devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeys \/ layout\u003c\/td\u003e\n\u003ctd\u003e6 keys: 2 left + 4 right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish \/ colour\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® Grigio Londra 0724 (a mid-tone matte London grey)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFENIX NTM® matte laminate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible hardware\u003c\/td\u003e\n\u003ctd\u003eSO08A01KNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible cover frames\u003c\/td\u003e\n\u003ctd\u003ePO71A01xx, PO71A03xx, PO71A71 \/ A55 \/ A45 \/ A60 doubles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice footprint\u003c\/td\u003e\n\u003ctd\u003e71 x 71 mm (2.80 x 2.80 in) OL-U front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (net, packed)\u003c\/td\u003e\n\u003ctd\u003e0.13 kg (0.29 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part no. \/ GTIN\u003c\/td\u003e\n\u003ctd\u003eBK24FX-0724 \/ 8054144524061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eRelated Products\u003c\/h3\u003e\n\u003cp\u003eFits SO08A01KNX. Other layouts in this colour: BK04FX-0724, BK08FX-0724, BK42FX-0724. Other FENIX colours: BK24FX-0030, BK24FX-0032, BK24FX-0720, BK24FX-0748, BK24FX-0754. Matching frames: PO71A01FX-0724, PO71A03FX-0724, PO71A71FX-0724. Mounting frames FO71A01-2M \/ -3M.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePassive accessory – no electrical rating. The OL-U KNX hardware it mounts on is CE certified; not UL\/NRTL listed — verify local code requirements before specifying in US installations.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Eelectron_SO08x0xKNXFI00010203_datasheet_A3_KNXSupply.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet (PDF)\u003c\/a\u003e · Available to order.\u003c\/p\u003e","brand":"Eelectron","offers":[{"title":"Default Title","offer_id":50559271305472,"sku":"BK24FX-0724","price":74.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/files\/Fenix_KIT6_Right_BK24FX-GREY-0724-1-3.jpg?v=1791476400"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/4161\/5360\/collections\/300643193_491377686326750_4855500991327384806_n.png?v=1791465614","url":"https:\/\/www.knxsupply.com\/collections\/eelectron.oembed","provider":"KNX Supply","version":"1.0","type":"link"}